Updated on 2023/10/12

写真a

 
IIZUKA Hiroshi
 
Title
Professor
Contact information
メールアドレス
Laboratory Phone number
+81-238-26-3212
 
Laboratory Fax number
+81-238-26-3212
 

Research Areas

  • Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Design engineering

  • Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Mechanics of materials and materials

Graduating School

  • Akita University, Faculty of Mining

    1978.03, Graduated

Graduate School

  • Akita University, Graduate School, Division of Mining

    Master's Course, 1980.03, Completed

Degree

  • Doctor of Engineering , Tokyo Metropolitan University, 1988.12

External Career

  • , Teaching Associate, 1980.04 - 1992.03

  • Chalmers University of Technology , Researcher, 1995.08 - 1996.08

  • Yamagata University, Professor, 2003.04 -

  • Yamagata University, Manager, 2011.09 -

Academic Society Affiliations

  • Materials Research Society of Japan

 

Research Career

  • Mechanical Property of CVT Rubber Belts, 2005.04 -

    CVT Rubber Belt, Fatigue

Papers

  • Relationship between Porous Structureand Absorption Characteristics of Electromagnetic Wave Absorbers Blended with Agricultural By-products, J104-B(12) 1-8, 2021.12

    S.Yamamoto, T.Kaneiwa and H.Iizuka

    Multiple Authorship (Only Japanese)

  • Wear of Composite Resin by Polyacetal Added with Carbon Powder Made from Rice Hull, The Proceedings of Conference of Kanto Branch, 2020(0) 17A09, 2020.03

    NIIYAMA Kyohei, ITAGAKI Takayoshi, TAKAHASHI Mikio, TAKAHASHI Hideo, IIZUKA Hiroshi

    Single Author

  • Friction and Wear Properties of Porous Carbon Materials made from Rice Hull at High Temperature, Transactions of the Materials Research Society of Japan, 45(1) 1-4, 2020.02

    Sano M., Takahashi T., Iizuka H., Shishido M.

    Single Author

  • Relationship between Manufacturing Process and Absorption Characteristics of Electromagnetic Wave Absorbers Blended with Agricultural By-products, IEEJ Transactions on Fundamentals and Materials, 140(11) 540-541, 2020

    Yamamoto Shinichiro, Kaneiwa Toshihiko, Iizuka Hiroshi

    Single Author

  • Fatigue Strength Simulation of Natural Porous Structure, Int.J.Soc.Mater.Eng.Resour., 23(2) 167-172, 2018.10

    Y. TANAKA, T. MASUYAMA, T. TAKAHASHI, H. IIZUKA and M. Shishido

    Multiple Authorship (Including Foreigners)

  • Development and Performance Evaluation of Oil-retaining Porous Carbon Bearing made from Rice Hull, Transactions of the Materials Research Society of Japan, 43(4) 241-244, 2018.08

    K. Honma, T. Masuyama, T. Takahashi, H. Iizuka and M. Shishido

    Multiple Authorship (Including Foreigners)

  • Triboloy Property in Oil-Impregnated Porous Carbon Materials made from Rice Hull, Inter. J. of the Society of Materials Engineering for Resources, 23(1) 59-63, 2018.05

    K. Honma, T. Masuyama, T. Takahashi, H. Iizuka and M. Shishido

    Multiple Authorship (Including Foreigners)

  • Residual twist in a double-layer strand and its correlation with bending fatigue, Acta Mechanica, 228 2799-2810, 2017.04

    T. Morimoto, H. Iizuka, F. Ashida

    Multiple Authorship (Including Foreigners)

  • Compressive Strength by Atmospheric Exposure Tests of Porous Carbon Materials made from Rice Hull, Trans. Mat. Res. Soc. , Japan, 41(1) 63-66, 2016.04

    M.Shishido, T.Sato, T.Takahashi and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Strength Properties of Adhesive Containing Porous Carbon Materials made from Rice Hull, Trans. Mat. Res. Soc. , Japan, 41(1) 117-120, 2016.04

    T.Sato, T.Takahashi T.Sato, H.Iizuka and M.Shishido

    Multiple Authorship (Including Foreigners)

  • Development of industrial friction material in porous carbon material made from rice bran, Bulletin of the JSME, 81(827) 15-00098, 2015.06

    K.Yoshida, U.Shimizu, H.Iizuka

    Multiple Authorship (Only Japanese)

  • Wear rate and fracture toughness of porous particle-filled phenol, Composites Part B, 77(on line) 19-26, 2015.03

    Takuya Morimoto, Tsubasa Suzuki and Hiroshi Iizuka

    Multiple Authorship (Including Foreigners)

  • On the reference configurations of pre-twisted composite strands, , AsianProceedings of the Conference on Mechanics of Functional Materials and Structures,(Nara, Japan), 117- 120, 2014.10

    Morimoto, T., Iizuka,H., Ashida, F.

    Multiple Authorship (Including Foreigners)

  • Injection-Molded-Plastic-Spur-Gear added with Carbon Particle made from Rice Hull (Effect of the Carbon Particle on Fatigue Life and Noise during Operation), 49(5) 265-272, 2014.05

    Multiple Authorship (Only Japanese)

  • Mechanical strength of injection-molded Plastic-spur-gear added with carbon particles made from rice hull, 48(11) 523-530, 2013.11

    Multiple Authorship (Only Japanese)

  • Research and Development of Injection-molded Plastic Gears Filled with Carbon Powder from rice Hulls, International Conference on Gears, 2013.10

    Takayoshi Itagaki, Hideo Takahashi and Hiroshi Iizuka

    Multiple Authorship (Including Foreigners)

  • The Deformation-Diffusion Coupling in Thin Elastomeric Gels, Mechanics and Model-Based Control of Advanced Engineering Systems, 229-237, 2013.04

    T. Morimoto, H. Iizuka

    Multiple Authorship (Including Foreigners)

  • Seawater Resistance of Porous Carbon Materials made from Rice Hull, Trans. Mat. Res. Soc. Japan, 38(2) 213-216, 2013.04

    M. Shishido, K. Endo, W. Endo, T. Sato, T. Takahashi and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Tensile Behaviors of Pre-twisted Composite Strands, Archive of Appl. Mech., 83(2) 193-205, 2013.02

    T. Morimoto , H. Iizuka

    Multiple Authorship (Including Foreigners)

  • Elastic Instability of a Rubber Blok Sliding on a Hard Rough Surface, Proceedings of ACMFMS 2012, Mech of Func. Mater. and Struct., 1(1) 715-718, 2012.12

    T.Morimoto, T.Ando and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Antibacterial Activities of Plant Powders with Magnesium Oxide, Transactions of the Materials Research Society of Japan, 37(4) 597-600, 2012.12

    Kousyu Kurita, Hiroyuki Noda, Hiroshi Iizuka

    Multiple Authorship (Including Foreigners)

  • Conformal Contact between a Rubber Band and Rigid Cylinders, Journal of Applied Mechanics, 79(7) 044504, 2012.07

    T.Morimoto and H. Iizuka

    Multiple Authorship (Including Foreigners)

  • Antibacterial Activities of Plant Powders with Magnesium Oxide, Transactions of the Materials Research Society of Japan, 37(4) 597-600, 2012.04

    Kousyu Kurita,Hiroyuki Noda and Hiroshi Iizuka

    Multiple Authorship (Including Foreigners)

  • Self-equilibrium Configurations of Composite Strands, Composite Structures, 94 1575-1581, 2011.12

    T.Morimoto and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Rolling Contact between a Rubber Ring and Rigid Cylinders, International Journal of Mechnical Sciences, 54 234-240, 2011.11

    T.Morimoto and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics, Journal of Solid Mechanics and Materials Engineering, 5(8) 386-396, 2011.08

    Tsunehisa SUZUKI, Mutsuto KATO, Hiroshi SAITO and Hiroshi IIZUKA

    Multiple Authorship (Including Foreigners)

  • Effect of Carbon Nanotube (CNT) Size on Wear Properties of Cu-Based CNT Composite Electrodes in Electrical Discharge Machining, Journal of Solid Mechanics and Materials Engineering, 5(7) 348-359, 2011.07

    Tsunehisa SUZUKI, Mutsuto KATO, Hiroshi SAITO and Hiroshi IIZUKA

    Single Author

  • Tensile Behaviour of Torque-balanced Strands, The Second Conference on Functional Materials and Structures, 2010.10

    Y.Takagi, T.Morimoto and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Tensile Behaivor of Torque-balanced Strand under Tensile Loading, Proceedings of the Asian Conference on Mechanics of Functional Materials and Structures, 2010, 191-194, 2010.10

    Y. Takagi, T. Morimoto and H. Iizuka

    Multiple Authorship (Including Foreigners)

  • Rolling Contact between a Rubber Ring and Rigid Cylinders, Proceedings of the Asian Conference on Mechanics of Functional Materials and Structures, 2010, 21-24, 2010.10

    T. Morimoto and H. Iizuka

    Multiple Authorship (Including Foreigners)

  • Effect of Resin Impregnation on Mechanical Properties of Rice Hull Silica Carbon, Int.J.Soc.Mater.Eng.Resour.Vol.、No., 17(2) 173-176, 2010.10

    J.Asana, T.Kimura, T.Takahashi and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Electric Properties of Composite Materials with Rice Hull Carbon, Proceedings of the sixth International Workshop on Green Composites, 271-274, 2010.09

    T.Suzuki, T.Kaneiwa, T.Yakahashi and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Preparation and Mechanical Properties of Recycleed Thermoplastic Composites with Rice Hull Particles, Transaction of the Materials Research Society of Japan, 35(4) 929-932, 2010.04

    T.Sato, T.Hirata, S.Takahashi, M.Shishido and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Electromagnetic Wave Absorption in Rubber Composite Materials with Soy Hull Carbon Powder (共著), 9'th International Conference on ECOMATERIALS, Kyoto, 125-126, 2009.11

    M.Kaneta, H.Goto, T.Takahashi, H.Anzai, H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Effect of Resin Impregnation on Mechanical Properties of Rice Hull Silica Carbon (共著), Proceedings of ICMR 2009 AKITA, 46, 2009.10

    J.Asano, M.Kimura, T.Takahashi, H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Shielding of Electromagnetic Wave in Rubber Composite Material with Rice Hull Silica Carbon (共著), 21'st International Conference on Magnet Technology, Hefei, (1) PF-36, 2009.10

    M.Kaneta, T.Takahashi, T.Kanaya, M.Itoh, T.Nishikubo, H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Improvement of Bending Fatigue Strength for Hybrid Cords with Carbon and Glass Fibers (共著), Proceedings of The ASME IDETC/CIE Conference, SanDiego, CDROM(PTG86323), 2009.08

    M.Furusawa, Y.Tsukada, T.Morimoto and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Initiation of Surface Crack in CVT Rubber Belts (共著), Proceedings of The JSME International Conference on MPT, 609-613, 2009.05

    H.Iizuka, N.Suzuki, T.Morimoto and A.Tokuda

    Multiple Authorship (Including Foreigners)

  • A Rate-Dependent Model of Flat Rubber Belts (共著), Proceedings of The JSME International Conference on MPT, Sendai, 1(1) 620-623, 2009.05

    T.Morimoto, H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Electromagnetic Wave Absorption by Rice Hull Carbon, Transactions of Materials Research Society of Japan, 34(4) 651-654, 2009.04

    M.Kaneta, T.Takahashi, T.Kanaya and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Electromagnetic Shielding Properties in Rubber Composite Materials with Soy Hull Carbon Particles, Abstract of International Union of the Materials Research Society -International Congress in Asia 2008, No.HO-3, 2008.12

    M.Shishido, T.Ogawa, H.Goto, T.Takahashi, and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Effects of Pretreatment and Kneading on Mechanical Properties of RHS Carbon (共著), Transaction of the Materials Reserch Society of Japan, 33(4) 1205-1208, 2008.04

    M.Kimura, S.Endo, T.Takahashi and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Surface Precipitates Formed on a Porous Carbon Material made from Rice Bran during Seawater Immersion, The Transactions of the Materials Research Society of Japan, 43(3) 205-208, 2008.03

    M. Shishido, S. Ito, T. Sato, K. Honma, T. Ito, T. Takahashi and H. Iizuka

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure Mechanism of CVT Rubber Belts (共著), Proceedings of the PTG2007 (ASME), Las Vegas, No.340044, 2007.09

    H.Iizuka, J.Yamashita, A.Tokuda

    Multiple Authorship (Including Foreigners)

  • Improvement of Electro-conductivity in Rubber Composite Materials with Rice Hull Silica Carbon, Proceedings of the Eighth International Conference on Eco-materials, 1 221-227, 2007.07

    M.Shishido, K.Yoshida, Y.Kurita, H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure of Helical Steel Cords, Transactions of the Japan Society of Mechanical Engineers, 73(730) 228-233, 2007.06

    Kazuyoshi NONO,Hideo TAKAHASHI,Hiroshi IIZUKA

    Multiple Authorship (Only Japanese)

  • Control of Porosity in Porous Carbon Materials made from Rice Hull, Transaction of the Materials Resaerch Society of Japan, 32(4) 1043-1046, 2007.04

    K.Yoshida, S.Endo, T.Takahashi and H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Water Resistance and Mechanical Properties of Modified Porous Carbon Materials Made from Rise Hull, 56(3) 252-257, 2007.03

    Michiaki Shishido,Satoshi Kubo,Keigo Yoshida,Takeshi Takahashi,and Hiroshi Iizuka

    Multiple Authorship (Only Japanese)

  • Preparation and characterization of glass-like carbon/silica composites from rice hull and phenolic resin (共著), JOURNAL OF MATERIALS SCIENCE, 41(17) 5593-5597, 2006.09

    Unuma.H, Niino.K, Sasaki.K, Shibata.Y, Iizuka.H, Shikano.S, Nakamura.T

    Multiple Authorship (Including Foreigners)

  • Improvement of Rubbers Fatigue Strength for Glass-Fiber Helical Cords(共著), International Rubber Conference, 2005 YOKOHAMA, 28-G9-03, 2005.10

    H.Iizuka,M.Furusawa,H.Imanishi

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure Initiation Site in Synchronous Belts under Constant and Fluctuating Torque Conditions(共著), The American Society of Mechanical Engineers, International Power Transmission and Gearing Conference, (48020) , 2003.09

    H.Iizuka,Y.Ohta,A.Ueno,T.Murakami

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure Mechanism of Steel Cords in Synchronous Belt(共著), The American Society of Mechanical Engineers, International Power Transmission and Gearing Conference, (48022) , 2003.09

    H.Takahashi,H.Iizuka

    Multiple Authorship (Including Foreigners)

  • A New Porous Carbon Material made from Rice Bran(共著), Int. J. Soc. Mater. Resour., 11(1) 10-15, 2003.03

    H.Iizuka, T.Noguchi and S.Shikano

    Multiple Authorship (Including Foreigners)

  • 高分子材料の寿命予側と長寿命化技術(共著), エヌ・ティー・エス, 696-700, 2002.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Reduction of Extensional Strength of Synchronous-Belt Cords(共著), The Japan Society of Mechanical Engineers, Proceedings of the International Conference on Motion and Power Transmissions, 797-802, 2001.11

    (H.Takahashi,H.Iizuka,M.Takahashi

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure of Synchronous Belts for Automobile under Fluctuating Torque(共著), The Japan Society of Mechanical Engineers, Proceedings of the International Conference on Motion and Power Transmissions, 809-813, 2001.11

    K.Tomono,H.Iizuka,H.Takahashi

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure of Synchronous Belts under Fluctuating Torque(共著), The Japan Society of Mechanical Engineers, Proceedings of the International Conference on Motion and Power Transmissions, 803-808, 2001.11

    H.Iizuka,R.Kasahara,T.Mizuno,N.Ohsako

    Multiple Authorship (Including Foreigners)

  • Mechanical Properties of Porous Carbon Material made from Rice Bran(共著), Proceedings of the International Conference on Material Resources, 254-259, 2001.10

    H.Noguchi,M.Senga,H.Iizuka,S.Shikano,T.Takahashi

    Multiple Authorship (Including Foreigners)

  • A New Porous Material made from Rice Bran(jointly worked), Proceeding of the 4th International Conference on Materials Engineering for Resources, 2 254-259, 2001.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • プラスチック・ゴム複合材料の弾塑性挙動(共著), 日本ゴム協会誌, 74(1) 29-34, 2001.01

    飯塚博,林彰紀,星大介,加部和幸

    Multiple Authorship (Including Foreigners)

  • Extensional Stiffness Loss in Synchronous-Belt Cords during Fatigue(共著), Proceedings of 8th International ASME Conference on Power Transmissions and Gearing, (14412) , 2000.09

    H.Iizuka,H.Takahashi

    Multiple Authorship (Including Foreigners)

  • Fatigue Damage Prediction in Synchronous Belts(共著), Trans.ASME, J. Mech. Design, 121(2) 280-288, 1999.06

    H.Iizuka,G.Gerbert , T.H.C.Childs

    Multiple Authorship (Including Foreigners)

  • Mechanical Properties for Plastic-Rubber Composite Materials(共著), Proceedings of International Rubber Conference, 342-345, 1999.04

    H.Iizuka,K.Kabe

    Multiple Authorship (Including Foreigners)

  • Decrease of Stiffness in Synchronous Belts during Fatigue(jointly worked), 4th World Congress on Gearing and Power Transmission, 2 1319-1325, 1999.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Decrease of Stiffness in Synchronous Belts during Fatigue(共著), Proceedings of 4th World Conference on Gearing and Power Transmission, 1319-1325, 1999.03

    H.Iizuka,H.Takahashi

    Multiple Authorship (Including Foreigners)

  • Mechanical Behaviour of Woodceramics, A Porous Carbon Material(共著), Journal of Porous Materials, 6(3) 175-184, 1999.02

    H.Iizuka, H.Fushitani, T.Okabe and K.Saito

    Multiple Authorship (Including Foreigners)

  • A New porous Carbon Material made from Rice Bran(共著), Proceedings of the International Conference on Material Resources, 23-24, 1998.10

    H.Iizuka,G.Kato,K.Igarashi,S.Shikano,T.Takahashi

    Multiple Authorship (Including Foreigners)

  • Importance of Bending Strength to Synchronous Belts (共著), Proceedings of Ⅷ International Conference on Machinery Recycling, 127-133, 1998.04

    H.Iizuka,H.Takahashi

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure Mechanism of Belt-Cords(jointly worked), Key Engineering Materials, 137 163-170, 1998.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Fracture Behavior of Woodceramics(共著), Proceedings of 3rd International Conference on Ecomaterials, 228-231, 1997.09

    H.Iizuka,T.Okabe,K.Saito

    Multiple Authorship (Including Foreigners)

  • New Hard Porous Carbon Material made of Rice Bran(共著), The International Union of Materials Research Society, International Conference in Asia, Proceedings of IUMRS-ICA-97, T -754, 1997.09

    S.Shikano,T.Takahashi,K.Hokkirigawa,H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Fracture Strength in a Porous Carbon Materials, Woodceramics(共著), The International Union of Materials Research Society, International Conference in Asia, Proceedings of IUMRS-ICA-97, T -754, 1997.09

    H.Iizuka,M.Fushitani,T.Okabe,K.Saito

    Multiple Authorship (Including Foreigners)

  • Fracture Strength of a New Porous Carbon Material from Rice Bran(共著), Proceedings of 3rd International Conference on Ecomaterials, 301-304, 1997.09

    H.Iizuka,G.Kato,K.Hokkirigawa,S.Shikano,T.Takahashi

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure Mechanism of Belt Cords(共著), Key Engineering Materials, 137 163-170, 1997.07

    H.Iizuka and H.Takahashi

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure Mechanism of Belt Cords(共著), Proceedings of International Workshop on Polymer Blend and Composites, 163-170, 1997.07

    H.Iizuka,H.Takahashi

    Multiple Authorship (Including Foreigners)

  • The Effects of Grain Boundary Strengthening on the High Temperature Strength of Heat Resisting Alloys(共著), Recent Research in Metallurgy and Science, 1 1-21, 1997.01

    M.Tanaka , H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Fatigue Failure Mechanism of Synchronous Belts(共著), Proceedings of 7th International Power Transmissions and Gears Conference, 319-325, 1996.09

    H.Iizuka , G.Gerbert

    Multiple Authorship (Including Foreigners)

  • Mechanical Properties of Porous Carbon Materials i.e. Woodceramics(共著), Journal of Materials Science Letter, 15(8) 1770-1772, 1996.08

    H.Iizuka, M.Fushitani, M.Ohtsuka, T.Okabe, K,Saito and K.Hokkirigawa

    Multiple Authorship (Including Foreigners)

  • Observation of Fatigue Failure in Synchronous Belts, Fatigue and Fracture Engng. Mater., 17(7) 783-790, 1994.07

    H.Iizuka, K.Watanabe , S.Mashimo

    Multiple Authorship (Including Foreigners)

  • Initiation of Recrystallized Grain Structure under High Temperature Low-Cycle Fatigue in 304 Stainless Steel (共著), J. of Mater. Sci., 29(2) 894-898, 1994.02

    H.Iizuka , N.Sato

    Multiple Authorship (Including Foreigners)

  • Creep-Rupture Properties and Grain Boundary Sliding in Wrought Cobalt HS-21 Alloy at High Temperature(共著), J. of Mater. Sci., 27(6) 2636-2640, 1992.06

    M.Tanaka, H.Iizuka , F.Ashihara

    Multiple Authorship (Including Foreigners)

  • Effects of Tungsten Content on the Creep-Rupture Properties of Low-Carbon Co-base Heat-Resistant Alloys(共著), Metall. Trans., A, 23A(2) 609-616, 1992.02

    M.Tanaka , H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Effects of Grain Size and Micro-Structure on the Internal Friction and Young’s Modulus of a High-Strength Steel HT-80(共著), J. of Mater. Sci., 26(15) 4389-4393, 1991.12

    M.Tanaka , H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Fracture Toughness Measurement with Fatigue Pre-cracked SENB Specimens of WC-Co Metal (共著), J. of Mater. Sci., 26(15) 4394-4398, 1991.12

    H.Iizuka , M.Tanaka

    Multiple Authorship (Including Foreigners)

  • Creep Deformation of Ductile Two-Phase Alloys(共著), Acta Metall. Mater., 39(7) 1549-1554, 1991.07

    M.Tanaka, H.Iizuka , F.Ashihara

    Multiple Authorship (Including Foreigners)

  • Effects of Grain Size on Wedge-Type Crack Initiation in Low-Cycle Fatigue at High Temperature(jointly worked), Materials at High Temperature, 9(1) 5199-5206, 1991.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Effects of Grain Size on Wedge-Type Crack Initiation in Low-Cycle Fatigue at High Temperature(共著), Mater. at High Temperature, 9(1) 17-22, 1991.03

    H.Iizuka , M.Tanaka

    Multiple Authorship (Including Foreigners)

  • Improvement of Fatigue Crack Growth Resistance by Grain Boundary at High Temperature(共著), Trans. ASME, J. Mater. Tech., 113(1) 9-14, 1991.03

    H.Iizuka, M.Tanaka , F.Ashihara

    Multiple Authorship (Including Foreigners)

  • Effects of High Temperature Aging on the Creep-Rupture Properties of Co-base L-605 Alloys(共著), J. of Mater. Sci., 25(8) 5199-5206, 1990.08

    M.Tanaka , H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Improvement of Fatigue Crack Growth Resistance by Grain-Boundary Reaction Precipitates at High Temperature(共著), J. of Mater. Sci., 25(8) 3785-3789, 1990.08

    H.Iizuka , M.Tanaka

    Multiple Authorship (Including Foreigners)

  • High Temperature Fracture of Composite Materials(共著), High Temperature Tech., 8(3) 208-218, 1990.08

    M.Tanaka , H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Creep Crack Growth in an Austenitic Cr-Ni-Mn Steel (共著), Trans. ASME, J. Mater. Tech., 112(2) 353-357, 1990.02

    M.Tanaka, H.Iizuka , F.Ashihara

    Multiple Authorship (Including Foreigners)

  • Effects of Serrated Grain Boundary and Cold Work on the Creep-Rupture Properties of Co-base Supperalloy L-605 (共著), Z. Metall., 81(2) 149-152, 1990.02

    M.Tanaka.H.Iizuka

    Multiple Authorship (Including Foreigners)

  • Effects of Grain Boundary Configuration on the High-Temperature Creep Strength of Co-base L-605 Alloys(共著), J. of Mater. Sci., 24(5) 2421-2428, 1989.07

    M.Tanaka, H.Iizuka , F.Ashihara

    Multiple Authorship (Including Foreigners)

  • Improvement of Creep Rupture Properties of Wrought Co-base HS-21 Alloys at High Temperature(共著), J. of Mater. Sci., 24(5) 1623-1628, 1989.07

    M.Tanaka, H.Iizuka , F.Ashihara

    Multiple Authorship (Including Foreigners)

  • コバルト基超合金L-605のクリープ破断特性におよぼす粒界のジグザグ化と冷間加工の影響(共著), 日本金属学会誌, 53(1) 149-156, 1989.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • 高温低サイクル疲労における微小き裂の発生と伝ぱへの粒界反応型析出の影響(共著), 日本機械学会論文集(A編), 55(515) 1469-1473, 1989.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • 高温低サイクル疲労における粒界き裂発生への結晶粒径の影響(共著), 日本機械学会論文集(A)編, 55(512) 697-702, 1989.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Effect of Serrated Grain Boundary on the Crack Growth in Austenitic Heat-Resisting Steel during High-Temperature, Journal of the Materials Science, 23(11) 3827-3832, 1988.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • A Micromechanics Model of the Initiation of Grain Boundary crack in high Temperature Fatigue(共著), ASTM STP, 942 611-621, 1988.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Micromechanical Models of High-Temperature Deformation of Composites(jointly worked), High Temperature Technology, 6(4) 171-179, 1988.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Micromechanical Models of High-temperature Deformation of Composites, High Temperature Technology, 6(4) 208-218, 1988.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • 粒界反応型析出による高温疲労き裂伝ぱ特性の改善(共著), 日本機械学会論文集(A編), 54(503) 1317-1321, 1988.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Effect of Grain-Boundary Configuration on the Creep Rupture Strength and Grain Boundary Sliding in an Austenitic Heat Resisting Steel(共著), Transaction of the Iron and Steel Institute of Japan, 28(2) 129-135, 1988.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Creep Rupture Strength and Grain Boundary Sliding in Austenitic 21Cr-4Ni-9Mn Steels with Serrated Grain Boundary(共著), Journal of the Materials Science, 23(2) 621-628, 1988.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • 耐熱合金におけるクリープ中の粒界破壊の発生と強じん化機構(共著), 日本機械学会論文集(A編), 53(487) 483-489, 1987.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • The High Temperature Deformation of Metallic Materials with Ellipsoidal Second-Phase Particles(共著), Bulletin of JSME, 29(254) 23657-2368, 1986.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • On the Improvement of High Temperature Low Cycle Fatigue Property by Grain Boundary Reaction Properties(共著), Bulletin of the JSME, 29(253) 1982-1987, 1986.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Effect of Heat Treatment on Precipitation Behaviour and High Temperature Strength in a Wrought Co-Base Super-Alloy(共著), Journal of the Materials Science, 21(6) 2803-2811, 1986.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • A model of the High-Temperature Deformation of Metallic Materials with Ellipsoidal Second Phase Particles(共著), Journal of the Materilas Science, 21(4) 1932-1938, 1986.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Fracture Initiation at Sperical Inclusion in a Matrix Plastically Deformed by Shear(共著), Journal of the Materials Science, 21(2) 611-618, 1986.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • 高温変形における粒界三重点でのき裂発生について(共著), 日本機械学会論文集(A編), 52(473) 7-12, 1986.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • A Continuum Mechanics of a Spherical Model for Crack Initiation at Grain Boundary Triple POints in High Temperature Deformation(共著), Bulletin of JSME, 29(255) 2751-2758, 1986.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • On the Initiation of Wedge-Type Crack at Grain Boundary Triple Junctios during High-Temperature Creep(共著), Journal of the Materials Science, 20(1) 9-16, 1985.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • Co基超耐熱合金HS-21の粒界反応とクリープ破断特性(共著), 鉄と鋼, 71(6) 727-734, 1985.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • 楕円体状の第二相粒子を含む金属材料の高温変形について(共著), 日本機械学会論文集(A編), 51(472) 2783-2788, 1985.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • 粒界反応型析出による高温低サイクル疲労特性の改善(共著), 日本機械学会論文集(A編), 51(471) 2569-2574, 1985.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • 高張力鋼HT80の内部摩擦及びヤング率に及ぼす微細組織の影響(共著), 材料, 34(386) 1267-1270, 1985.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • On Fracture Initiation in a Material with an Ellipsoidal Inclusion(jointly worked), Journal of Materials Science, 20(10) 3750-3762, 1985.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • On Fracture Initiation in a Material with an Ellipsoidal Inclusion(共著), Journal of the Materials Science, 20(10) 3750-3762, 1985.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • On the Work Hardening Behaviour of Metallic Materials with Sperical Second Phase Particles at High Temperature(共著), Journal of the Materials Science, 19(12) 3976-3986, 1984.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • クリープ・疲労重畳条件下のクリープ変形挙動とその損傷評価について(共著), 材料, 32(361) 1174-1180, 1983.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

  • オーステナイト系21-4N鋼の変形機構とクリープ破壊に及ぼす微細組織の影響(共著), 材料, 30(331) 340-345, 1981.04

    飯塚 博

    Multiple Authorship (Including Foreigners)

display all >>

Review Papers

  • Failure Mechanism of Drive Belts, 63(8) 539-544, 2018.08

  • Mechanical Properties of New Porous Carbon Materials made from Rice Bran and Wood, Trivandrum, Research Signpost, 3 69-81, 2002.01

    H.Iizuka

Grant-in-Aid for Scientific Research

  • Grant-in-Aid for Scientific Research(C),2017.04 -

  • Grant-in-Aid for Scientific Research(C),2017.04 - 2020.03

  • Grant-in-Aid for Scientific Research(C),2014.04 - 2016.03

  • Grant-in-Aid for Scientific Research(C),2011.04 - 2014.03

  • Grant-in-Aid for Scientific Research(C),2008.04 - 2010.03

  • Grant-in-Aid for Scientific Research(C),2002.04 - 2005.03

  • Grant-in-Aid for Scientific Research(C),2000.04 - 2002.03

  • Grant-in-Aid for Scientific Research(C),1998.04 - 2000.03

display all >>

Joint Research activities

  • Study about fatigue of Metal products, 2006.04 - , Collaboration in College

Presentations

  • IUMRS-ICEM 2012, International presentation, 2012.09, Poster presentation

  • The 10th Machine Design and Tribology Division Meeting in JSME , Domestic presentation, 2010.04, Oral presentation (general)