Nanotechnology/Materials / Organic functional materials

Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Manufacturing and production engineering

Effect of Processing Temperature and Polymer Types on Mechanical Properties of Bamboo Fiber Composites, BioResources, 19(1) 41-52, 2023.11

T. Takeuchi, P. Luengrojanaku, H. Ito, S. Rimdusit and S. Shibata

Multiple Authorship (Including Foreigners)

Surface replication and characterization of ultrahigh‑pressure homogenizer treated cellulose nanofiber‑reinforced polyvinyl alcohol composites by thermal imprinting, Cellulose 30, 10983-10998, 2023.10

T. Ueda, A. Nemoto, A. Ishigami, S. Thumsorn, Y. Kobayashi, H. Ito

Multiple Authorship (Including Foreigners)

Microfabrication of Thermoplastic Polypropylene Surface Structures via Thermal Imprinting for Controlling the Adhesion of Easy Peel Package, ACS Omega, 2023, 8(38) 35127-35139, 2023.09

C. Winotapun, T. Makmoon, C. Aumnate, D. Thanomjitr, W. Rungseesantivanon, H. Ito

Multiple Authorship (Including Foreigners)

Influence of Ambient Temperature and Crystalline Structure on Fracture Toughness and Production of Thermoplastic by Enclosure FDM 3D Printer, Journal of Manufacturing and Materials Processing, 7(1) 44, 2023.02

S. Thumsorn, W. Prasong, A. Ishigami, T. Kurose, Y. Kobayashi, H. Ito

Multiple Authorship (Including Foreigners)

Effects of High-Pressure Press on the Tensile Properties and Morphology of Polypropylene, Materials Transactions, 64(4) 774-779, 2023.02

Y. Ito, S. Nishitsuji, H. Sano, M. Ishikawa, T. Inoue, H. Ito

Multiple Authorship (Including Foreigners)

Towards a Circular Economy: Study of the Mechanical, Thermal, and Electrical Properties of Recycled Polypropylene and Their Composite Materials, Polymers 2022, 14(24) 5482, 2022.12

T. Jamnongkan, N. Intraramongkol, W. Samoechip, P. Potiyaraj, R. Mongkholrattanasit, P. Jamnongkan, P. Wongwachirakorn, M. Sugimoto, H. Ito and C. F. Huang

Multiple Authorship (Including Foreigners)

Characterization of photo-oxidative degradation process of polyolefins containing oxo-biodegradable additives, Polymer, 262 125455, 2022.12

A. Padermshoke, T. Kajiwara, Y. J. An, M. Takigawa, T. V. Nguyen, H. Masunaga, Y. Kobayashi, H. Ito, S. Sasaki and A. Takahara

Multiple Authorship (Including Foreigners)

Structural, rheological, and mechanical properties of polyvinyl alcohol composites reinforced with cellulose nanofiber treated by ultrahigh-pressure homogenizer, Materials Today Communications, 33 , 2022.12

T. Ueda, A. Ishigami, S. Thumsorn, T. Kurose, Y. Kobayashi, H. Ito

Multiple Authorship (Only Japanese)

Effects of molecular weight and annealing conditions on the essential work of fracture of polycarbonate, Polymer Engineering and Science (Wiley), 2022.08

S. Nishitsuji, T. Sato, M. Ishikawa, T. Inoue, H. Ito

Multiple Authorship (Only Japanese)

Rheological Behavior and Dynamic Mechanical Properties for Interpretation of Layer Adhesion in FDM 3D Printing, Polymers 2022, 14(13) 2721, 2022.07

S. Thumsorn, W. Prasong, T. Kurose, A. Ishigami, Y. Kobayashi, and H. Ito

Multiple Authorship (Only Japanese)

Investigating the Characteristics of a Natural Fiber Composite Fabricated from 9,9'-Bis(aryl)fluorene-modified Nanocellulose and Bamboo Fiber, BioResources, 17(3) 4559-4567, 2022.06

K. M. Sefat, T. Kurose, M. Yamada, H. Ito, S. Shibata

Multiple Authorship (Only Japanese)

Structure Reconfigurable Mechanochromic Polymer with Shape Memory and Strain-Monitored Function Enabled by a Covalent Adaptable Network, Macromolecules 2022, 55(10) 3948-3957, 2022.05

Y. Mao, Y. Kubota, R. Feng, J. Gong, A. Ishigami, Y. Kobayashi, T. Watabe, D. Aoki, H. Otsuka, and H. Ito

Multiple Authorship (Only Japanese)

Relating Amorphous Structure to the Tear Strength of Polylactic Acid Films, POLYMERS 2022, 14(10) 計10, 2022.05

Y. Kobayashi, A. Ishigami, H. Ito

Multiple Authorship (Only Japanese)

Experimental Investigation and Numerical Simulation of a Self-Wiping Corotating Parallel Octa-Screw Extruder, POLYMERS 2022, 14(6) 1201, 2022.03

C. Y. Liu, S. Mikoshiba, Y. Kobayashi, A. Ishigami, D. Yorifuji, S. Tanifuji and H. Ito

Single Author

Changes in Crystal Structure and Accelerated Hydrolytic Degradation of Polylactic Acid in High Humidity, POLYMERS (Basel), 13(24) 4324, 2021.12

Kobayashi Yutaka, Ueda Tsubasa, Ishigami Akira, Ito Hiroshi

Single Author

High-order Structure Formation of COP/LLDPE Bi-layer Film During Uniaxial/Biaxial Stretching, Seikei-Kakou, 33(11) 408-417, 2021.10

Hashimoto Yoshinori, Nishitsuji Shotaro, Ishigami Akira, Nishio Mihoko, Ito Hiroshi

Multiple Authorship (Only Japanese)

Mechanical Performance and Visual Fracture Warning Function of Mechanochromic Stimuli-Recovery Polymer Networks, Macromolecules, 54(18) 8664-8674, 2021.08

Y. Mao, Y Kubota, J. Gong, T. Kurose, A. Ishigami, K. Seshimo, T. Watabe, D. Aoki, H. Otsuka, and H. Ito

Multiple Authorship (Including Foreigners)

Fabrication of 9,9'-Bis(aryl)fluorene-modified Nanocellulose Bamboo Fiber Composite, BioResources, 16(2) 3907-3915, 2021.04

K. M. Sefat, T. Kurose, M. Yamada, H. Ito, S. Shibata

Multiple Authorship (Including Foreigners)

Wear resistance of graphene reinforced ultra-high molecular weight polyethylene nanocomposites prepared by octa-screw extrusion process, Composites Part B, 215 , 2021.03

C. Y. Liu, A. Ishigami, T. Kurose, H. Ito

Multiple Authorship (Including Foreigners)

A Molecular Interpretation of the Dynamics of Diffusive Mass Transport of Water within a Glassy Polyetherimide, International Journal of Molecular Sciences, 22(6) 2908, 2021.03

A. Correa, A. De Nicola, G. Scherillo, V. Loianno, D. Mallamace, F. Mallamace, H. Ito, P. Musto, G. Mensitieri

Multiple Authorship (Including Foreigners)

Effect of Flake Surface Treatment on Mechanical Properties of Aluminum Flake Filled Epoxy Resin Composites, The Japan Institute of Metals and Materials, 85(5) 174-181, 2021.03

Yutaro Sako, Takashi Kurose, Akira Ishigami, Hiroshi Ito

Multiple Authorship (Only Japanese)

Characterization of Thermal Imprinting and Releasing of Resins using Micro-multi-fin Structured MEMS Mold for Structural Color Expression, Journal of the Surface Finishing Society of Japan, 72(3) 170-175, 2021.03

Toru YAHAGI, Naoya YAMADA, Hiroki MURAYAMA, Mutsuto KATO, Yoshiyuki WATANABE, Hiroshi ITO, Takashi MINETA

Multiple Authorship (Only Japanese)

Improvement of Interlayer Adhesion and Heat Resistance of Biodegradable Ternary Blend Composite 3D Printing, Polymers, 13(5) 740, 2021.02

W. Prasong, A. Ishigami, S. Thumsorn, T. Kurose, H. Ito

Multiple Authorship (Only Japanese)

Segmented Polyurethane Elastomers with Mechanochromic and Self‐strengthening Functions, Angewandte Chemie International Edition, 60(15) 8406-8409, 2021.01

K. Seshimo, H. Sakai, T. Watabe, D. Aoki, H. Sugita, K. Mikami, Y. Mao, A. Ishigami, S. Nishitsuji, T. Kurose, H. Ito, H. Otsuka

Multiple Authorship (Only Japanese)

Effect of Layer Directions on Internal Structures and Tensile Properties of 17-4PH Stainless Steel Parts Fabricated by Fused Deposition of Metals, Materials, 14(2) 243, 2021.01

Y. Abe, T. Kurose, M.V.A. Santos, Y. Kanaya, A. Ishigami, S. Tanaka, H. Ito

Multiple Authorship (Only Japanese)

Overview of Seikei-Kakou Annual Meeting 2021, Seikei-Kakou, 33(10) 332, 2021

Ito Hiroshi

Single Author

Effect of Melt-Compounding Protocol on Self-Aggregation and Percolation in a Ternary Composite, Polymers, 12(12) 3041, 2020.12

J.H. Kim, J.S. Hong, A. Ishigami, T. Kurose, H. Ito, K.H. Ahn

Multiple Authorship (Including Foreigners)

Correlation of the Abbe Number, the Refractive Index, and Glass Transition Temperature to the Degree of Polymerization of Norbornane in Polycarbonate Polymers, Polymers, 12(11) 2484, 2020.10

N. Kato, S. Ikeda, M. Hirakawa, H. Ito

Multiple Authorship (Only Japanese)

Energy Dissipation and Mechanoresponsive Color Evaluation of a Poly(n-hexyl Methacrylate) Soft Material Enhanced by a Mechanochromic Cross-Linker with Dynamic Covalent Bonds, Macromolecules, 53(21) 9313-9324, 2020.10

Y. Mao, Y. Kubota, T. Kurose, A. Ishigami, K. Seshimo, D. Aoki, H. Otsuka, H. Ito

Multiple Authorship (Only Japanese)

Physical and Morphological Properties of Tough and Transparent PMMA-Based Blends Modified with Polyrotaxane, Polymers, 12(8) 1790, 2020.08

A. Ishigami, K. Watanabe, T. Kurose, H. Ito

Multiple Authorship (Only Japanese)

Visualization and Quantitative Evaluation of Toughening Polymer Networks by a Sacrificial Dynamic Cross-Linker with Mechanochromic Properties, ACS Macro Letters, 9(8) 1108-1113, 2020.07

H. Sakai, D. Aoki, K. Seshimo, K. Mayumi, S. Nishitsuji, T. Kurose, H. Ito, H. Otsuka

Multiple Authorship (Only Japanese)

Influence of the Layer Directions on the Properties of 316L Stainless Steel Parts Fabricated through Fused Deposition of Metals, Materials, 13(11) 2493, 2020.05

T. Kurose, Y. Abe, M.V.A. Santos, Y. Kanaya, A. Ishigami, S. Tanaka, H. Ito

Multiple Authorship (Only Japanese)

Morphology, Thermal and Mechanical Properties of Co-Continuous Porous Structure of PLA/PVA Blends by Phase Separation, Polymers, 12(5) 1083, 2020.05

N. Chuaponpat, T. Ueda, A. Ishigami, T. Kurose, H. Ito

Multiple Authorship (Only Japanese)

Properties of 3D Printable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate)Blends and Nano Talc Composites, Journal of Nanomaterials, vol. 2020, 8040517, 2020.03

W. Prasong, P. Muanchan, A. Ishigami, S. Thumsorn, T. Kurose, H. Ito

Multiple Authorship (Including Foreigners)

Fabrication of High-Resolution Conductive Patterns on a Thermally Imprinted Polyetherimide Film by the Capillary Flow of Conductive Ink, Microsystem Technologies, 2020.01

T. Kurose, H. Shishido, A. Ishigami, A. Nemoto, H. Ito

Multiple Authorship (Only Japanese)

A Robust Experimental Model to Explore the Three-Dimensional Printing of Polylactide Parts: Solution versus Melt Extrusion, Applied Sciences, 10(2) 509, 2020.01

J.M. Chen, Y.Y. Tseng, D. Lee, Y.T. Lin, S.H. Lin. T.Y Lee, S.J. Liu, H. Ito

Multiple Authorship (Including Foreigners)

Replication and Surface Properties of Micro Injection Molded PLA/MWCNT Nanocomposites, Polymer Testing, 83 106321, 2020.01

J.H. Lee, S.H. Park, S.H. Kim, H. Ito

Multiple Authorship (Including Foreigners)

Effect of Talc Size on Surface Roughness and Glossiness of Polypropylene Injection Molding Application to Automotive Plastics, POLYMER ENGINEERING AND SCIENCE, 60(1) 132-139, 2020.01

S. Kuroda, A. Mizutani, H. Ito

Multiple Authorship (Only Japanese)

Research Center for GREEN Materials and Advanced Processing, Yamagata University, Seikei-Kakou, 32(5) 174-176, 2020

Ito Hiroshi

Single Author

Crystal Transition Behavior and Thermal Properties of Thermal-Energy-Storage Copolymer Materials with an n-Behenyl Side-Chain, Polymers, 11(9) 1512, 2019.09

Y. Mao, J. Gong, M. Zhu, H. Ito

Multiple Authorship (Including Foreigners)

Molecular weight dependence of the physical aging of polycarbonate, Polymer, 178 121571, 2019.09

S. Nishitsuji, Y. Watanabe, H. Ito, M. Ishikawa, T. Inoue, M. Takenaka

Multiple Authorship (Including Foreigners)

Evaluation of toughness and failure mode of PA6/mSEBS/PS ternary blends with an oil-extended viscoelastic controlled interface, Polymer, 177 57-64, 2019.08

A. Ishigami, S. Nishitsuji, T. Kurose, H. Ito

Multiple Authorship (Including Foreigners)

Replication of Mesoscale Pore One-dimensional Nanostructures: Surface-induced Phase Separation of Polystyrene/Poly(vinyl alcohol) (PS/PVA) Blends, Polymers, 11(6) 1039, 2019.06

P. Muanchan, T. Kurose, H. Ito

Multiple Authorship (Including Foreigners)

Replication and Thermal Properties of One-Dimensional Composite Nanostructures with Enhanced Mechanical Robustness, Journal of The Electrochemical Society, 166(9) B3282-B3289, 2019.06

P. Muanchan, T. Kurose, H. Ito

Multiple Authorship (Including Foreigners)

Evaluation of Internal Morphology and Engineering Properties of Graphite Filled UHMWPE Nanocomposites Produced Using a Novel Octa-screw Kneading Extruder, Journal of Polymer Engineering, 39(3) 264-270, 2019.02

C. Liu, A. Ishigami, T. Kurose, H. Ito

Multiple Authorship (Including Foreigners)

Development of "Expertized AI" and "IoT-Based Mold" in Mold Manufacturing SME, Seikei-Kakou, 31(12) 452-455, 2019

Otobe Shingo, Urano Makoto, Oizumi Keiichi, Hayashi Takayuki, Ishigami Akira, Natthapong Chuaponpat, Ito Hiroshi

Single Author

Influence of talc and rubber contents on surface replication of polypropylene injection molding application to automotive plastics, Journal of Polymer Engineering, 20180251, 2018.12

S. Kuroda, A. Mizutani, H. Ito

Multiple Authorship (Including Foreigners)

Structural Formation of UHMWPE Film Tracked by Real-Time Retardation Measurements during Uniaxial/Biaxial Stretching, Materials, (11) 2292, 2018.11

Y. Hashimoto, S. Nishitsuji, T. Kurose, H. Ito

Multiple Authorship (Including Foreigners)

A 3D Printable Thermal Energy Storage Crystalline Gel Using Mask-Projection Stereolithography, Polymers, (10) 1117, 2018.10

Y. Mao, T. Miyazaki, K. Sakai, J. Gong, M. Zhu, H. Ito

Multiple Authorship (Including Foreigners)

Factors affecting the co-axial electrospraying of core–shell-structured poly(d,l-lactide-co-glycolide) microparticles, Japanese Journal of Applied Physics, 57(11) 116702, 2018.10

D. Lee, M.Y. Hsu, M.J. Li, Y.W. Liu, S.J. Liu, C.Y. Liu, H. Ito

Multiple Authorship (Including Foreigners)

Comparative Study on Polyamide 6 Toughness using Multiple Melt-Kneading Techniques, Academic Journal of Polymer science, 1(3) 555563, 2018.07

A. Ishigami, T. Konno, T. Kurose, S. Nishitsuji, M. Ishikawa, H. Ito

Multiple Authorship (Including Foreigners)

Excellent Thermal Stability P(BeA-co-MMA) Microcapsules with High Thermal Energy Storage Capacity, Polymer2018, 150, 267-274, (150) 267-274, 2018.07

Y. Mao, J. Gong, M. Zhu, H. Ito

Multiple Authorship (Including Foreigners)

Structural Formation of Cyclic Olefin Copolymer (COC) Films as Revealed by Real Time Retardation Measurements during Fast Stretching Process, 2018, 6(3), 60, 2018.06

Y. Hashimoto, H. Ito

Multiple Authorship (Including Foreigners)

Optical properties of high-density polyethylene in injection press molding for IR system lenses, POLYMER ENGINEERING AND SCIENCE, 58(5) 632-641, 2018.05

R. Kaneda, T. Takahashi, M. Takiguchi, M. Hijikata, H. Ito

Multiple Authorship (Only Japanese)

Processing and Thermal Response of Temperature-Sensitive-Gel(TSG)/PolymerComposites, Polymers, 2018.05

J. Gong, E. Hosaka, K. Sakai, H. Ito, Y. Shibata, K. Sato, D. Nakanishi, S. Ishihar, K. Hamada

Multiple Authorship (Including Foreigners)

Thin-wall injection molding of high-density polyethylene for infrared radiation system lenses, JOURNAL OF POLYMER ENGINEERING, 38(3) 307-313, 2018.03

R. Kaneda, T. Takahashi, M. Takiguchi, M. Hijikata, H. Ito

Multiple Authorship (Only Japanese)

Antistatic surface properties of plastics using donor-accepter molecular compounding antistatic agent, JOURNAL OF POLYMER ENGINEERING, 38(1) 1-5, 2018.01

T. Watanabe, H. Hamanaka, T. Sano, H. Ito

Multiple Authorship (Only Japanese)

In Vivo and In Vitro Elution of Analgesics from Multilayered Poly(D,L)-lactide-co-glycolide Nanofibers Incorporated Ureteral Stents, Journal of Nanomaterials, vol. 2018, 2018

Y.C. Lin, K.S. Liu, D. Lee, M.J. Li, S.J.Liu, H. Ito

Multiple Authorship (Including Foreigners)

Plastic and Metal Injection Molding Joining Technology andits Joining Mechanism, Journal of The Adhesion Society of Japan, 54(5) 187-194, 2018

KUROSE Takashi, ITO Hiroshi

Single Author

Evaluation of Structures and Morphologies of Recycled PC/PET Blends Fabricated by High-Shear Kneading Processing, International Polymer Processing, 2017.11

A. Ishigami, Y. Kodama, T. Wagatsuma and H. Ito

Multiple Authorship (Including Foreigners)

Relationship between degree of polymerization and optical and thermal properties of fluorene in polycarbonate polymers, Journal of Applied Polymer Science, 2017.08

N. Kato, S. Ikeda, M. Hirakawa, H. Ito

Multiple Authorship (Including Foreigners)

Relationship Between Fine Replication and Low Transmitted Wavefront Error of Optical Plastic Parts in Injection Molding, International Journal of Engineering Research and Development, 2017.03

T Takaoka, K Yamamoto, T Ueno, H Owari, H Ito

Multiple Authorship (Including Foreigners)

Optical Properties of HDPE in Injection Molding and Injection Press Molding for IR System Lenses. Part II: Mold Temperature and Surface Roughness Effects on Injection Molding, International Polymer Processing , 2017.03

R.Kaneda, T.Takahashi, M.Takiguchi, M.Hijikata, H. Ito

Multiple Authorship (Including Foreigners)

Antistatic properties of transparent plastics using a donor-accepter molecular compound antistatic agent, Journal Polymer Engineering, 2017.03

T Watanabe, H Hamanaka, T Sano, H Ito

Multiple Authorship (Including Foreigners)

Improvement of impact strength and hydrolytic stability of PC/ABS blend using reactive polymer, Journal of Applied Polymer Science, 2017.03

K. Nishino, Y. Shindo, T. Takayama, H. Ito

Single Author

Effect of thermal annealing on crystallinity and mechanical strength of textile glass and carbon fiber reinforced in situ polymerized ϵ-caprolactam parts, Microsystem Technologies, 2017

K Taki, H Suenaga, H Ito

Multiple Authorship (Including Foreigners)

One-dimensional polymer nanofiber arrays with high aspect ratio obtained by thermal nanoimprint method, Polymer Engineering & Science, 2017

P Muanchan, S Suzuki, T Kyotani, H Ito

Multiple Authorship (Including Foreigners)

Comparison of Network Structure Photopolymerized under UV-LED and High-Pressure Mercury Lamp with Different Photoinitiators, Journal of Photopolymer Science and Technology, 2017

K. Taki, T. Taguchi, R. Hayashi, H. Ito

Multiple Authorship (Including Foreigners)

Antiglare Layer Formation on Polycarbonate Sheet Using UV-Curable Resin-induced Crystallization and Subsequent CO2 Gas Foaming, Journal of Photopolymer Science and Technology, 2017

K. Taki, K. Niinuma, A. Hariu, and H. Ito

Multiple Authorship (Including Foreigners)

Oxygen concentration and conversion distributions in a layer-by-layer UV-cured film used as a simplified model of a 3D UV inkjet printing system, Chemical Engineering Science, 2016.11

K Taki, Y Watanabe, T Tanabe, H Ito, M Ohshima

Multiple Authorship (Including Foreigners)

Mechanical Properties and Structure of Novel Polymer Blends and Composites Fabricated by Reactive and High-shear Rotational Processing, Energy Procedia, 2016.06

A. Ishigami, Y. Kodama, H. Suenaga, T. Inoue and H. Ito

Multiple Authorship (Including Foreigners)

Direct joining of a laser-ablated metal surface and polymers by precise injection molding, Microsystem Technologies, 2016.01

K Taki, S Nakamura, T Takayama, A Nemoto, H Ito

Multiple Authorship (Including Foreigners)

Mechanical Properties and Structure of Novel Polymer Blends and Composites Fabricated by Reactive and High-shear Rotational Processing, Energy Procedia, 2016

A. Ishigami, Y. Kodama, H. Suenaga, T. Inoue and H. Ito

Multiple Authorship (Including Foreigners)

Cover-layring a Porous Polyimide Flexible Print Circuit with a Porous Polyimide Layer, Journal of Photopolymer Science and Technology, 2016

K. Taki, A. Mizoguchi, H. Ito

Multiple Authorship (Only Japanese)

Photopolymerization kinetics of different chain sizes of bi-functional acrylic monomers using real time FT-IR, Journal of Photopolymer Science and Technology, 2016

K Taki, T Taguchi, R Hayashi, H Ito

Multiple Authorship (Including Foreigners)

Optical Properties of HDPE in Injection Molding and Injection Press Molding for IR System Lenses, Intern.Polymer Processing XXXI, 2016

R.Kaneda, T.Takahashi, M.Takiguchi, M.Hijikata, H. Ito

Multiple Authorship (Including Foreigners)

Development of Styrenic Copolymers for Improving Heat Resistance of Poly(methyl methacrylate) , Intern.Polymer Processing XXXI, 2016

K.Nishino, Y.Shindo1 , Y.Kurokawa, T.Takayama , H. Ito

Multiple Authorship (Including Foreigners)

A kinetic model of viscosity development for in situring-opening anionic polymerization of ϵ-caprolactam, Microsystem Technologies, 2016

K Taki, N Shoji, M Kobayashi, H Ito

Multiple Authorship (Including Foreigners)

Development of a High-Intensity UV Exposure Apparatus under a High-Pressure CO2 Gas Atmosphere to Manufacture Large-Area Porous Ultralow-k Polyimide Substrates for Flexible Print Circuits , J. Photopolymer Science and Technology, 2015.02

K.Taki and H.Ito

Multiple Authorship (Including Foreigners)

Biomimetic superhydrophobic polymer surfaces by replication of hierarchical structures fabricated using precision tooling machine and anodized aluminum oxidation, Microsystem Technologies, 2015

D.Chu, A.Nemoto, H.Ito

Multiple Authorship (Including Foreigners)

Enhancement of Dynamic Wetting Properties by Direct Fabrication on Robust Micro-Micro Hierarchical Polymer Surfaces, Applied Surface Science, 2014.02

D.Chu, A.Nemoto, H.Ito

Multiple Authorship (Including Foreigners)

Effects of Geometric Parameters for the Superhydrophobicity with the Polymer Surfaces Fabricated by Precise Tooling Machine , J. Microsystem Technologies, 2014.01

D.Chu, A.Nemoto, H.Ito

Multiple Authorship (Including Foreigners)

Hydrophobic Property of Hierarchical Polymer Surfaces Fabricated by Precision Tooling Machine, J. Polymer Engineering, 2014.01

D.Chu, A.Nemoto, H.Ito

Multiple Authorship (Including Foreigners)

Thermal Properties and Morphology Characteristics of a PP Mono-Filament and its Foam, PIntern.Polymer Processing XXXI, 2014

N. Chuapon, O. Naithanom, Y. Sato, S. Areerat, H. Ito

Multiple Authorship (Including Foreigners)

Particle size distribution effects on physical properties of injection molded HA/PLA composites, Advanced Composite Materials, 2013.12

T.Takayama, K.Uchiumi, H.Ito, T.Kawai, M.Todo

Multiple Authorship (Including Foreigners)

Optical characteristics of injection-moldedfluorine polymers, J. Polymer Engineering, 2013.11

M.Kato and H.Ito

Multiple Authorship (Including Foreigners)

Deformation Velocity Dependence on Tensile Fracture Characteristics of Polypropylene Injection Molding Parts, Polym. Eng. Sci., 2013.11

Y.Ohta, H.Ito, M.Ishikawa

Multiple Authorship (Including Foreigners)

In situ Observations of Flow-Induced Precursors during Shear Flow, Macromolecules, 2013.01

Y.Zhao, K.Hayashi, G.Matsuba, H.Ito

Multiple Authorship (Including Foreigners)

Shear-induced conformational fluctuations of polystyrene probed by 2D infrared microspectroscopy, Polymer, 53, 2012.09

Y.Zhao, G.Matsuba, T.Moriwaki, Y.Ikemoto, H.Ito

Multiple Authorship (Including Foreigners)

Manufacturing of a 316L Stamper for Imprinting by Micro Sacrificial Plastic Mould Insert MIM, Powder Injection Moulding International, Powder Injection Moulding International, 2012.06

K.Okubo, S.Tanaka, H.Ito, K.Nishiyabu

Multiple Authorship (Including Foreigners)

Direct Fabrication on The Polymer Surfaces by Using Precision Tooling Machine and Characterization of Hydrophobicity at Various Rough Surfaces, ANTEC tech. paper 2012, CDROM #1258373, 2012.04

D.Chu, A.Nemoto, H.Ito

Multiple Authorship (Including Foreigners)

Precision Injection Molding of Bio-absorbable HAp/PLA Composites, ANTEC tech. paper 2012, CDROM #1258389, 2012.04

K.Uchiumi, T.Takayama, H.Ito

Multiple Authorship (Including Foreigners)

Shear-induced Crystallization and Rheological Behavior of Syndiotactic Polystyrene, J. Mater. Res., 2012.03

Y.Zhao, G.Matsuba, H.Ito

Multiple Authorship (Including Foreigners)

Evaluation of Surface Replication of Injection Molded Products Using a Diffraction Method, Trends in Opto Electro and Optical Communications, 2012.02

T.Takaoka, T.Ueno, H.Owari, H.Ito

Multiple Authorship (Including Foreigners)

Transparent Thermoplastic Resin with Electron Beam Cross-linking, Polymer Engineering & Science, 2011.12

T.Sano, M.Nakabayashi, H.Ito

Multiple Authorship (Including Foreigners)

Effects of Mold Surface Conditions on Flow Length in Injection Molding Process, Polym.Eng.Sci., 2011.07

M.Otsuka, AOyabe,H.Ito

Multiple Authorship (Including Foreigners)

Surface Replication of Molded Products with Micro-needle Features in Injection Molding, Program and Abstract book for 6th International Conference AMDP 2011, 2011.07

K.Uchiumi, T.Takayama, H.Ito, A.Inou

Multiple Authorship (Including Foreigners)

Replication Behavior for Micro Surface Features with High Aspect Ratio and Structure Development in Injection Compression Molding, Program and Abstract book for 6th International Conference AMDP 2011, 144, 2011, 2011.07

H.Suzuki, T.Takayama, H.Ito

Multiple Authorship (Including Foreigners)

Precision Polymer Nano-Molding with Anodic Aluminum Template, ANTEC tech. paper 2011, 2011.05

H.Ito, A.Haryu, S.Takahagi, T.Takayama, T Kyotani

Multiple Authorship (Including Foreigners)

The Effects of Surface Roughness on Moldability of Thin-wall Parts, Society of Plastics Engineers Plastics Research Online, 2011.04

M.Otsuka, AOyabe,H.Ito

Multiple Authorship (Including Foreigners)

Replication Properties and Structure of PC in Micromolding with Heat Insulator Mold Using Zirconia Ceramic, Intern.Polymer Processing , 2011.03

Y.Kayano, K.Zouta, S.Takahagi, H.Ito

Multiple Authorship (Including Foreigners)

The Effects of Metal Particle Size and Distributions on Dimensional Accuracy for Micro Metal Injection Molding, Microsyst Technol, 2010.10

K.Okubo,S.Tanaka, H.Ito

Multiple Authorship (Including Foreigners)

Injection Molded Optical Lens Using a Heat Resistant Thermoplastic Resin with Electron Beam Cross-Linking, Jpn.J.Appl.Phys., 2010.08

T.Sano, Y.Iyoda, T.Shimizu, M.Harumoto, A.Inoue, M.Nakabayashi, and H.Ito

Multiple Authorship (Including Foreigners)

Evaluation of Replication Properties on Moulded Surface by Ultrasonic Injection Moulding System Plastics, Rubber and Composites , 2010.07

A.Sato, H.Sakaguchi,K.Koyama, H.Ito

Multiple Authorship (Including Foreigners)

Numerical Simulation for Flow Behaviour on Micro-and nanomoulding Plastics, Rubber and Composites, Rubber and Composites, 2010.07

K.Tada, D.Fukuzawa, A.Watanabe, H.ito

Multiple Authorship (Including Foreigners)

Micromolding for Quartz Glass/Polymer Composites, ANTEC 2010 Tech. paper, 2010.05

H.Ito, K.Honta, T.Ikari, S.Ito

Multiple Authorship (Including Foreigners)

Replication Properties and Structure in Micromolding with Heat Insulator Mold, ANTEC 2010 Tech. paper, 2010.05

H.Ito, S.Takahagi, K.Zouda, Y.Kayano

Multiple Authorship (Including Foreigners)

Polymer structure and properties in micro- and nanomolding process, Current Applied Physics, 2009.09

H.Ito, H.Suzuki, K.Kazama, and T.Kikutani

Multiple Authorship (Including Foreigners)

Molding Technology for Improvement on Dimensional Accuracy of Micro-Parts in Micro Metal Injection Molding, Microsystem Tech, 2009.06

K.Okubo, S.Tanaka, H.Ito

Multiple Authorship (Including Foreigners)

Evaluation of Replication Properties on Molded Surface by Ultrasonic Injection Molding System, ANTEC 2009 Tech. paper, 2009.05

2. A.Sato, H.Sakaguchi, H.Ito, K.Koyama

Multiple Authorship (Including Foreigners)

The Effects of Metal Particle size and Distributions on Dimensional Accuracy for Micro Parts in Micro Metal Injection Molding, ANTEC 2009 Tech. paper, 2009.05

K.Okubo, S.Tanaka, H.Ito

Multiple Authorship (Including Foreigners)

Computer Simulation for Flow Behavior on Micro-and Nano Molding, ANTEC 2009 Tech. paper, 2009.05

K.Tada, D.Fukuzawa, A Watanabe, H.Ito

Multiple Authorship (Including Foreigners)

Study of Application of Ultrasonic Wave to Injection Molding, Polymer Engineering and Science, 2009.04

A.Sato, H.Ito, K.Koyama

Multiple Authorship (Including Foreigners)

On-line Measurement Studies on Orientation Development and Characteristic Short-Period Diameter Fluctuation in High Speed In-line Drawing of Poly(ethylene terephthalate) Fiber, Intern, Polymer Processing, 2009.03

W-G. Hahm, W.Takarada, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Micro-Features Formation in Injection Compression Molding, Journal of Solid Mechanics and Materials Engineering, 2009.02

H.Ito, H.Suzuki

Multiple Authorship (Including Foreigners)

Compression Process Effects on Filling Density and Replication Properties of Micro-Surfaces during Metal Injection Molding, Asia Pacific Journal of Chemical Engineering, 2009.02

K.Okubo, S.Tanaka, H.Hamada, H.Ito

Multiple Authorship (Including Foreigners)

Behavior of Resin Flow under Ultrasonic Wave in Extrusion Process, Intern. J. Polymers Tech, 2009.02

A.Sato, H.Ito, K.Koyama

Multiple Authorship (Including Foreigners)

Fiber Structure Development in high-Speed Melt Spinning of Poly(trimethylene terephthalate)(PTT)-On-line Measurement of Birefringence-, J. Polym. Sci., Part B: Polym. Phys., 2008.01

H.K.Kim, H.H.Cho, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Surface Replication and Thermal Properties of Polycarbonate Films in Thermal Nano-Imprinting, ANTEC 2008 Tech. paper, 2008.01

M.Matsumoto, K.Miyata, H.Ito, H.Suzuki, T.Furuta

Multiple Authorship (Including Foreigners)

Structural Development and Replication Properties of Micro-Molded Parts in Injection Compression Molding, ANTEC 2008 Tech. paper, 2008.01

H.Ito, H.Suzuki, K.Kazama, T.Kikutani

Multiple Authorship (Including Foreigners)

Particle Distribution and Mechanical Properties of Silica-Filled PMMA Micro-injection Moldings, Proceedings of the 2008 International Manufacturing Science and Engineering Conference, Proceedings of the 2008 International Manufacturing Science and Engineering Conference, 2008, 2008.01

Y.W. Leong, S.Thumsorn, A.Nakai, H.Hamada, H.Ito

Multiple Authorship (Including Foreigners)

Micro-Features Formation in Injection Compression Molding, Proceedings of the 3rd JSME/ASME International Conference on Material and Processing ICM&P, 2008.01

H.Ito, H.Suzuki

Multiple Authorship (Including Foreigners)

Fiber Structure Development in High-Speed Melt Spinning of Poly(trimethylene terephthalate) (PTT)-On-line Measurement of Birefringence, Journal of Polymer Science: Part B: Polymer Physics, 2008.01

K.H.Kim, K.H.Kim, H.H.Cho, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Surface Replication and Structural Development in Micromolding for Micro/nano-composites, Proceedings of the 2007 International Manufacturing Science and Engineering Conference, 2007.01

H.Ito, K.Kazama, T.Kikutani

Multiple Authorship (Including Foreigners)

Effects of Process Conditions on Surface Replication and Higher-order Structure in Micromolding, Macromolecular Symposia, 2007.01

H.Ito, K.Kazama, T.Kikutani

Multiple Authorship (Including Foreigners)

Mechanical Properties and Morphology of PMMA Grafted Silica/PMMA Injection Molded Composites, ANTEC 2007 Tech. paper, 2007.01

Y.Kobayashi, Y.W.Leong, M.Sarata, H.Hamada, K.Yamada, M.Kotaki, K.Yoshinaga, H.Karakawa, H.Ito, K.Kazama, T.Kikutani

Multiple Authorship (Including Foreigners)

Surface Replication Property and Higher-order Structure Development of Molded Parts with Ultrastructural Patterns Prepared by Micro/nanomolding, ANTEC 2007 Tech. paper, 2007.01

H.Ito, K.Kazama, T.Kikutani, T.Takaoka, S.Kawai

Multiple Authorship (Including Foreigners)

Thermal Properties and Structure of Injection Molded Thin-wall Products of Polypropylene/boron-nitride Composites, ANTEC 2007 Tech. paper, 2007.01

H.Ito, K.Kazama, T.Kikutani

Multiple Authorship (Including Foreigners)

Analysis of Necking Deformation Behavior High-Speed In-line Drawing Process of PET by On-Line Diameter and Velocity Measurements, International Polymer Processing, 2006.05

W.G.Hahm, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Structure and Properties of Thin-wall Molded with Micro Surface Features, SPE, INC., ANTEC Tech. Papers, 2006.01

H.Ito, K.Kazama, T.Yasuhara, T.Saito, T.Kikutani

Multiple Authorship (Including Foreigners)

Structural Development in Thin-wall Injection Molding Process, SPE, INC., Tech. Papers, 2006.01

H.Ito, Y.Yagisawa, T.Saito, T.Yasuhara, T.Kikutani, Y.Yamagiwa

Multiple Authorship (Including Foreigners)

Structure Development and Properties of High-speed Melt Spun Poly(butylene terephthalate)/Poly(butylenes adipate-co-terephthalate) Bicomponent Fibers, Polymer, 2006.01

X.Q.Shi, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Structure Development and Properties of Melt Spun Poly(butylenes succinate) and Poly(butylenes terephthalate-co-succinate-co-adipate) Biodegradable Fibers, Intern. Polymer Processing, 2006.01

X.Q.Shi, M.Takasaki, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Deformation and Orientation of PET Filament via High Speed In-line Drawing, SPE, INC., ANTEC Tech. Papers, 2006.01

W.G.Hahm, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Numerical Simulation and Experimental Study on Metal Injection Molding, SPE, INC., ANTEC Tech. Papers, 2006.01

S.Tanaka, K.Taira, K.Okubo, H.Ito, H.Hamada

Multiple Authorship (Including Foreigners)

Micro-scale Disk in Ultra Miniature Injection Molding, SPE, INC., ANTEC Tech. Papers, 2006.01

H.Ito, K.Kazama, T.Kikutani, K.Okubo, S.Tanaka

Multiple Authorship (Including Foreigners)

Characterization on Mixed-crystal Structure of Poly(butylenes terephthalate/succinate/adipate) Biodegradable Copolymer Fibers, Polymer, 2005.03

X.Q.Shi, K.Aimi, H.Ito, S.Ando, T.Kikutani

Multiple Authorship (Including Foreigners)

Structure and Properties of Syndiotactic Polystyrene Fibers Prepared in High-Speed Melt Spinning Process, Fibers and Polymers, 2005.01

Y.Hada, H.Shikuma, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Characterization on Mixed-crystal Structure and Properties of Poly(butylene adipate-co-terephthalate) Biodegradable Fibers, Polymer, 2005.01

X.Q.Shi, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Evaluation of Material Properties and Processability Using The Intelligent Analysis System for Micromolding Process, SPE, INC., Tech. Papers, 2005.01

H.Ito, T.Saito, T.Yasuhara, T.Kikutani, Y.Yamagiwa, K.Muroi

Multiple Authorship (Including Foreigners)

Fundamental Study on Structural Development of Thin-wall Injection Molded Products, Theoritical and Applied Mechanics, 2005.01

H.Ito, Y.Yagisawa, T.Saito, T.Yasuhara, T.Kikutani, Y.Yamagiwa

Multiple Authorship (Including Foreigners)

High-Speed Melt Spinning of syndiotactic-Polystyrene; Improvement of Spinnability and Fiber Structure Development via Bicomponent Spinning with atactic-Polystyrene, J. Macromol. Sci. -Phys., 2005.01

Y.Hada, H.Shikuma, H.Ito, T.kikutani

Multiple Authorship (Including Foreigners)

High-speed Melt Spinning of Poly (ethylene terephthalate) with Periodic Oscillation of Take-up Velocity, Intern. Polymer Processing, International Polymer Processing, 2004.04

W.Takarada, K.Kazama, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Online Birefringence Measurement in Film Blowing Process, SPE, INC., Tech. Papers, 2004.01

H.Ito, K.Suzuki, T.Kikutani, T.Kanai, H.J.Kang

Multiple Authorship (Including Foreigners)

Development of Stereocomplex Crystal of Polylactide in High-Speed Melt Spinning and Subsequent Drawing and Annealing Processes, J. Macromol. Sci.-Phys., 2003.03

M.Takasaki, H.Ito and T.Kikutani

Multiple Authorship (Including Foreigners)

Interfacial properties of PP/PP composites, J. Appl. Polym. Sci., 2003.01

T.Kitayama, S.Utsumi, H.Hamada, T.Nishino, T.Kikutani, H.Ito

Multiple Authorship (Including Foreigners)

Structure Development of Polylactides with Various D-lactide Content in the High-speed Melt Spinning, J. Macromol. Sci.-Phys., 2003.01

M.Takasaki, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Fiber Structure Development in High-speed Melt Spinning of s-PS/a-PS Bicomponent Fibers, Proc. 8th Japan International SAMPE symposium, 2003.01

H.Ito, Y.Hada, T.Kikutani, H.Shikuma

Multiple Authorship (Including Foreigners)

On-line Birefringence Measurement in Film Blowing of Polypropylene, Proc. 8th Japan International SAMPE symposium, 2003.01

H.Ito, K.Suzuki, T.Kikutani, H.J.Kang, T.Kanai

Multiple Authorship (Including Foreigners)

Online Analysis on Structure Formation in Film Blowing Process of Polypropylene, Abstracts of International Conference on Materials for Advanced Technologies ICMAT 2003, I-7-3, 417, 2003 , 2003.01

H.Ito, K.Suzuki, T.Kikutani

Multiple Authorship (Including Foreigners)

Mechanical Properties of PP/PP Composites, SPE, INC., Tech. Papers, 2001.11

T.Kitayama, K.Ishikura, H.Hamada, T.Kikutani, H.Ito

Multiple Authorship (Including Foreigners)

Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. III. Modeling of Melt Spinning Process Incorporating Change in Cross-Sectional Shape, J. Appl. Polym. Sci., 2001.01

W.Takarada, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. I. Structural Analysis of As-Spun Fibers, J. Appl. Polym. Sci., 2001.01

W.Takarada, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. II. On-Line Measurements of the Spin Line, Including Change in Cross-Sectional Shape, J. Appl. Polym. Sci., 2001.01

W.Takarada, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Fiber Structure Formation in High-Speed Melt Spinning of Polyamide 6/Clay Hybrid Nanocomposite, J. Macromol. Sci., -Phys, 2000.04

E.Giza, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Fine-structure and Physical Properties of Polyethylene Fibers in High-speed Spinning, II Effect of Catalyst Systems in Linear Low-density Polyethylene, J.Appl. Polym., 2000.01

H.H.Cho, K.H.Kim, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

On-line Analysis of Stress and Birefringence Development in Simultaneous Biaxial Elongation of Poly(ethylene terephthalate), SPE, INC., ANTEC Tech. Papers, 2000.01

H.Ito, T.Suzuki, T.Kikutani, K.Nakayama

Multiple Authorship (Including Foreigners)

Fine-Structure and Physical Properties of Polyethylene/Poly(ethylene terephthalate) Bicomponent Fibers in High-speed Spinning, I Polyethylene Sheath/Poly(ethylene terephthalate) Core Fibers, J. Appl. Polym., 2000.01

H.H.Cho, K.H.Kim, Y.A.Kang, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Fine-structure and Physical Properties of Polyethylene/Poly(ethylene terephthalate) Bicomponent Fibers in High-speed Spinning, II Poly(ethylene terephthalate) Sheath/Polyethylene Core Fibers, J. Appl. Polym., 2000.01

H.H.Cho, K.H.Kim, Y.A.Kang, H. Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

Fine-structure and Physical Properties of Polyethylene Fibers in High-speed Spinning, I Effect of Melt-flow Rate in the High-density Polyethylene, J. Appl. Polym., 2000.01

H.H.Cho, K.H.Kim, H.Ito, T.Kikutani

Multiple Authorship (Including Foreigners)

On-line Measurement of Orientation Development in the High-Speed Melt Spinning Process, Polym. Eng. Sci, 1999.12

T. Kikutani, K.Nakao, W.Takarada, H.Ito

Multiple Authorship (Including Foreigners)

Structural Change of High-Speed Spun Poly(ethylene 2,6-naphthalate dicarboxylate) Fibers with Annealing, Sen'i Gakkaishi, 1999.11

K.Miyata, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Fiber Structure Development in High-Speed Melt Spinning of Poly(ethylene terephthalate-co-2,6-naphthalene dicarboxylate), J.Polym.Eng, 1999.06

K.Miyata, H.Ito, T. Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Fabrication of Continuous Fiber-Reinforced Thermoplastic Composites with Structural Gradient from Sheath-Core Type Bicomponent Fibers, Composite Interfaces, 1999.05

T.Furuta, J.Radhakrishnan, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Computational Analysis on the Thermal Bonding Behavior of Bicomponent Fibres, J. Text. Inst, 1999.01

H.S.Kim, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Enhancement of Fiber Structure Formation of a Liquid Crystalline Copolyester via Ultra High-Speed Bicomponent Spinning with Poly(ethylene terephthalate), Polym. Eng. Sci, 1999.01

J.Radhakrishnan, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Effect of Liquid Isothermal Bath in High-Speed Melt Spinning of Poly(ethylene 2,6-naphthalane dicarboxylate), Sen'i Gakkaishi, 1998.12

K.Miyata, H.Ito, T.Kikutani, and N. Okui

Multiple Authorship (Including Foreigners)

Structural Analysis of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibers Prepared by Drawing and Annealing Processes, Journal of Polymer Science: Part B: Polymer Physics, 1998.01

Y.Furuhashi, H.Ito, T.Kikutani, T.Yamamoto, M.Kimizu, M.Cakmak

Multiple Authorship (Including Foreigners)

Effect of Metrallic Wire Inserted in Nozzle in High-speed Melt Spinning of Poly(ethylene terephthalate), Journal of Applied Polymer Science, 1998.01

H.Jeon, H.Ito, T.Kikutani, N.Okui, M.Okamoto

Multiple Authorship (Including Foreigners)

Effect of Extraovdinary Large Diameter Nozzle in High-speed Melt Spinning of Poly(ethylene terephthalate), Sen'i Gakkaishi, 1997.12

H.J.Jeon, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

Tensile Behavior of Poly(ethylene terephthalate)/Polyethylene Bicomponent Fibers Prepared by High-Speed Melt Spinning, Seikei-Kakou, 1997.06

H.S.Kim, H.H.Cho, H.Ito, T.Kikutani, N.Okui

Multiple Authorship (Including Foreigners)

The Thermal Bonding Behavior of Polyethylene/Poly(ethylene-terephtalate)Bicomponent Fibers, Journal of Textile Institute, 1997.03

H.S.Kim, H.Ito,T.Kikutani,N.Okui

Multiple Authorship (Including Foreigners)

Determination of Crystallization Kinetics Parameters under High Pressure Using PvT Data, Journal of The Society of Materials Science Japan, 1996.12

H.Ito，M.Takahara，J.Takimoto，K.Koyama

Multiple Authorship (Including Foreigners)

Simulation of Crystallization in Injection Molding Process with a Large Mold, 高分子論文集, 1996.06

伊藤浩志，滝本淳一，多田和美，小山清人

Multiple Authorship (Including Foreigners)

Effect of Pressure and Shear Stress on Crystallization Behaviors in Injection Molding, International Polymer Processing, , 1996.04

H.Ito, K.Minagawa, J.Takimoto, K.Tada, K.Koyama

Multiple Authorship (Including Foreigners)

Determination of Crystallization Kinetics Parameter of Polypropylene with Various Weights, Reports on Progress in Polymer Physics in Japan, 1996.01

Y.Suzuki, S. Muto, H.Ito, J.Takimoto, K.Koyama

Multiple Authorship (Including Foreigners)

Simulations of Polymer Crystallization under High Pressure, Colloid & Polymer Science, 1995.08

H.Ito, Y.Tsutsumi, K.Minagawa, J.Takimoto, K.Koyama

Multiple Authorship (Including Foreigners)

Simulation of Crystallization in Large Molded Products, Reports on Progress in Polymer Physics in Japan, 1995.01

H.Ito, K.Minagawa, J.Takimoto, K.Tada, K.Koyama

Multiple Authorship (Including Foreigners)

Simulation for Estimation of Microstructure in Molded Polymer Products, Reports on Progress in Polymer Physics in Japan, 1994.01

H.Ito, K.Minagawa, Kiyohito K.Koyama, K.Tada

Multiple Authorship (Including Foreigners)

Basic Study of Acoustic Imaging Using Encoding Aperture Receiver with Piezoelectric Polymer Transducer, Jpn. J. Appl. Phys, 1990.01

K.Koyama, H.Ito, K.Tanaka, Y.Tamura

Multiple Authorship (Including Foreigners)

Acoustic Imaging Using Polymer Composite Array Transducer with Directivity Distribution, Jpn. J. Appl. Phys, 1989.01

K.Koyama, H.Ito, K.Tanaka, Y.Tamura

Multiple Authorship (Including Foreigners)

Relationship Between Fine Replication and Low Transmitted Wavefront Error of Optical Plastic Parts in Injection Molding, International Journal of Engineering Research and Development, 2017.03

T Takaoka, K Yamamoto, T Ueno, H Owari, H Ito

Nanoimprint Technology, Nanotransfer for Thermoplastic and Photocurable Polymers, Wiley, 2013.08

J.Taniguchi, H.Ito, J.Mizuno, T.Saito

Injection Molded Semicrystalline Polymers: Structure Development and Modeling: in Encyclopedia of Materials: Science and Technology, Elsevier Science Ltd, 2001.01

H. Ito

Grant-in-Aid for Scientific Research(C)，2016.04 - 2019.03

Grant-in-Aid for Scientific Research(C)，2016.04 - 2019.03

Grant-in-Aid for Scientific Research(C)，2009.04 - 2011.03

Grant-in-Aid for Scientific Research(B)，2006 - 2008

Grant-in-Aid for Scientific Research(B)，2003 - 2005

Grant-in-Aid for Scientific Research on Priority Areas，2001 - 2003

Grant-in-Aid for Scientific Research on Priority Areas，2001 - 2002

Grant-in-Aid for Scientific Research(C)，2000 - 2001

Grant-in-Aid for Encouragement of Scientists，1999 - 2000

Grant-in-Aid for Scientific Research(C)，1998 - 1999

Grant-in-Aid for Scientific Research(B)，1996 - 1997

Grant-in-Aid for Encouragement of Scientists，1994

2020 69th Symposium on Macromolecules, Domestic presentation, 2020.09, Oral presentation (general)

2020 69th Symposium on Macromolecules, Domestic presentation, 2020.09, Poster presentation

Annual Meeting 2020 Autumn, Domestic presentation, 2020.09, Poster presentation

Annual Meeting 2020 Autumn, Domestic presentation, 2020.09, Oral presentation (general)

Annual Meeting 2020 Autumn, Domestic presentation, 2020.09, Oral presentation (keynote)

Annual Meeting 2020 Autumn, Domestic presentation, 2020.09, Poster presentation

JSPP Annual Meeting 2020 in Tokyo, Domestic presentation, 2020.06, Oral presentation (general)

JSPP Annual Meeting 2020 in Tokyo, Domestic presentation, 2020.06, Oral presentation (general)

JSPP Annual Meeting 2020 in Tokyo, Domestic presentation, 2020.06, Oral presentation (general)

JSPP Annual Meeting 2020 in Tokyo, Domestic presentation, 2020.06, Oral presentation (general)

JSPP Annual Meeting 2020 in Tokyo, Domestic presentation, 2020.06, Poster presentation

The Fiber Society's Spring 2020 Conference, Domestic presentation, 2020.06, Poster presentation

The Fiber Society's Spring 2020 Conference, Domestic presentation, 2020.06, Oral presentation (invited, special)

The Fiber Society's Spring 2020 Conference, Domestic presentation, 2020.06, Oral presentation (general)

The Fiber Society's Spring 2020 Conference, Domestic presentation, 2020.06, Oral presentation (general)

69th SPSJ Annual Meeting, Domestic presentation, 2020.05, Poster presentation

69th SPSJ Annual Meeting, Domestic presentation, 2020.05, Poster presentation

69th SPSJ Annual Meeting, Domestic presentation, 2020.05, Poster presentation

69th SPSJ Annual Meeting, Domestic presentation, 2020.05, Poster presentation

Annual Meeting 2020 Spring, Domestic presentation, 2020.03, Poster presentation

Annual Meeting 2020 Spring, Domestic presentation, 2020.03, Poster presentation

The Fiber Society's Autumn 2019 Conference, Domestic presentation, 2019.11, Oral presentation (general)

The Fiber Society's Autumn 2019 Conference, Domestic presentation, 2019.11, Oral presentation (general)

2019 68th Symposium on Macromolecules, Domestic presentation, 2019.09, Oral presentation (general)

2019 68th Symposium on Macromolecules, Domestic presentation, 2019.09, Oral presentation (general)

2019 68th Symposium on Macromolecules, Domestic presentation, 2019.09, Oral presentation (general)

2019 68th Symposium on Macromolecules, Domestic presentation, 2019.09, Oral presentation (general)

2019 68th Symposium on Macromolecules, Domestic presentation, 2019.09, Oral presentation (general)

Summer research meeting 2019 of Materials science on mille-feuille structure (MFS) by Grant-in-Aid for Scientific Research on Innovative Areas, Domestic presentation, 2019.09, Oral presentation (general)

Summer research meeting 2019 of Materials science on mille-feuille structure (MFS) by Grant-in-Aid for Scientific Research on Innovative Areas, Domestic presentation, 2019.09, Poster presentation

Summer research meeting 2019 of Materials science on mille-feuille structure (MFS) by Grant-in-Aid for Scientific Research on Innovative Areas, Domestic presentation, 2019.09, Poster presentation

Summer research meeting 2019 of Materials science on mille-feuille structure (MFS) by Grant-in-Aid for Scientific Research on Innovative Areas, Domestic presentation, 2019.09, Poster presentation

2019 Fall Annual(165th) Meeting of Japan Institute of Metals and Materials, Domestic presentation, 2019.09, Poster presentation

2019 Fall Annual(165th) Meeting of Japan Institute of Metals and Materials, Domestic presentation, 2019.09, Poster presentation

JSPP Annual Meeting 2019 in Tokyo, Domestic presentation, 2019.06, Oral presentation (general)

JSPP Annual Meeting 2019 in Tokyo, Domestic presentation, 2019.06, Poster presentation

The Fiber Society's Spring 2019 Conference, Domestic presentation, 2019.06, Oral presentation (general)

The Fiber Society's Spring 2019 Conference, Domestic presentation, 2019.06, Poster presentation

The Fiber Society's Spring 2019 Conference, Domestic presentation, 2019.06, Poster presentation

68th SPSJ Annual Meeting, Domestic presentation, 2019.05, Oral presentation (general)

68th SPSJ Annual Meeting, Domestic presentation, 2019.05, Oral presentation (general)

68th SPSJ Annual Meeting, Domestic presentation, 2019.05, Oral presentation (general)

Annual Meeting 2019 Spring, Domestic presentation, 2019.03, Oral presentation (general)

The 135th Conference of Japan Institute of Light Metals in autumn, Domestic presentation, 2018.11, Oral presentation (keynote)

The Fiber Society's Autumn 2018 Meeting, Domestic presentation, 2018.11, Oral presentation (general)

The Fiber Society's Autumn 2018 Meeting, Domestic presentation, 2018.11, Poster presentation

The Fiber Society's Autumn 2018 Meeting, Domestic presentation, 2018.11, Oral presentation (general)

34th International Conference of the POLYMER PROCESSING SOCIETY (PPS-34), International presentation, 2018.05, Evaluation of Engineering Properties and Internal Morphology​ of Graphite Filled UHMWPE Composites Obtained by Special​ ​Kneading Process, Oral presentation (general)

ナノ構造ポリマー研究協会及びマイクロ・ナノ加工研究会, 2014 -

ナノ構造ポリマー研究協会及びマイクロ・ナノ加工研究会, 2014 -

国際高分子加工学会ＰＰＳ, 2014 -

プラスチック成形加工学会, 2014.07 - 2020.06

プラスチック成形加工学会, 2014.07 - 2020.06

プラスチック工学会ＳＰＥ, 2015.07 -

プラスチック工学会ＳＰＥ, 2015.07 -

繊維学会, 2016 - 2018

繊維学会, 2016 - 2018

繊維学会, 2018 - 2020

繊維学会, 2018 -

公益財団法人山形大学産業研究所　常務理事，2014 -