Updated on 2024/02/15

写真a

 
FURUKAWA Hidemitsu
 
Title
Professor
Date of Birth
1968
Contact information
メールアドレス
Homepage URL
https://swel.jp/
Departments URL
https://mech.yz.yamagata-u.ac.jp/lab/zairyo/furukawa_lab.html
　
Profile
Hidemitsu Furukawa completed his Ph.D. in Physics in the Department of Physics, Tokyo Institute of Technology in 1996. After this, he worked as an assistant in Tokyo Institute of Technology and Tokyo University of Agriculture and Technology, an assistant professor in Hokkaido University, and in April 2009 he was appointed associate professor in the Mechanical Systems Engineering Major at the Graduate School of Science and Engineering, Yamagata University, where he set up the Soft & Wet Matter Engineering Laboratory (SWEL), began mechanical engineering research on gel, and progressed towards the development of the world's first 3D gel printer. He was promoted to professor in 2012. In June 2013, he founded the Yamagata University Life-3D Printing Innovation Center (LPIC). and became the chair of the Center. In February 2014, he started the Yonezawa Itadakimasu (Future Food Developing) Research Group, and serves as its director. In August of the same year, he set up EKI Fab-3D Printing on the second floor of Yonezawa Station and became its management representative. He established and became the head of the Soft-Matter Robotics Consortium in March 2017. In November of the same year, he set up the first university-originated venture company, D-lightmatter, as a co-founder. In April 2018, he established the Soft 3D Co-creation Consortium, becoming its president. He is a fellow of Japanese Society of Mechanical Engineer, a director of the Society for Polymer Science, and a director of the Japanese Society of Ophthalmological Optics. He served as co-management committee chair for the 14th Japan-American Frontiers of Engineering Symposium (JAFOE) in 2018 and the 15th Symposium in 2020. He was a member of the investigative committee relating to the prospects of a "Fab Society," organized by the Ministry of Internal Affairs and Communications Institute for Information and Communications Policy (2013-2014), and is a guest researcher at the Science and Technology Foresight Center in the Ministry of Education, Culture, Sports, Science and Technology's National Institute of Science and Technology Policy (2017-). He is co-promotor and organizer of the Yamagata Makers Network (YMN) and president of Polymer Mirai Juku.

Research Areas

  • Soft and Wet Matter Engineering

  • 3D Gel Printer

  • 3D Food Printer

  • Education of 3D Printing

  • Light Scattering

  • Friction of Gels

  • 3D/4D Printing

  • Soft Matter Robotics

display all >>

Graduating School

  • Saitama University, Faculty of Science

    1991.03, Graduated

Graduate School

  • Saitama University, Faculty of Science

    Doctor's Course, 1991, Completed

  • Tokyo Institute of Technology, Graduate School, Division of Science and Engineering

    Doctor's Course, 1996, Completed

  • Tokyo Institute of Technology, Graduate School, Division of Science and Engineering

    Doctor's Course, 1996, Completed

  • Tokyo Institute of Technology, Graduate School, Division of Science and Engineering

    Doctor's Course, 1996.03, Completed

External Career

  • , Research Assistant, 1996.04 - 2002.03

  • , Research Assistant, 2002.04 - 2004.03

  • , Associate Professor (as old post name), 2004.04 - 2009.03

  • Yamagata University, Professor, Special Assistant to the Dean for Research, 2020.03 -

  • Yamagata University, Professor, Special Adviser to the Executive Directors (vice-president) for research, Special Assistant to the Dean for Research, 2021.03 -

  • Yamagata University, Professor, Special Adviser to the Executive Directors, Special Assistant to the Dean for Research, 2023.03 -

display all >>

Academic Society Affiliations

  • AMERICAN CHEMICAL SOCIETY

  • SPIE

  • THE SOCIETY OF RUBBER SCIENCE AND TECHNOLOGY, JAPAN

  • OPHTHALMOLOGICAL OPTICS SOCIETY OF JAPAN

  • JAPANESE SOCIETY OF TRIBOLOGISTS

  • AMERICAN SOCIETY OF MECHANICAL ENGINEER

display all >>

 

Research Career

  • Soft & Wet Matter Engineering, 2009.04 -

    Gels, Structure, Properties, Scattering, Photo Sciences, Life Sciences, Manufacture

Papers

  • 4D Printing of Hydrogels Controlled by Hinge Structure and Spatially Gradient Swelling for Soft Robots, Machines, 11(1) 103, 2023.01

    Masanari Kameoka, Yosuke Watanabe, MD Nahin Islam Shiblee, Masaru Kawakami, Jun Ogawa, Ajit Khosla, Hidemitsu Furukawa, Shengyang Zhang, Shinichi Hirai, Zhongkui Wang

    Single Author

  • Exciting 3D study!, Seikei-Kakou, 34(8) 279, 2022.07

    Furukawa Hidemitsu

    Single Author

  • Exciting 3D study!, Seikei-Kakou, 34(8) 279, 2022.07

    Furukawa Hidemitsu

    Single Author

  • Evaluation of Slicing Software Running on Chromebooks for Applying 3D Printers in School Classes, Computer & Education, 52(0) 83-84, 2022.06

    Usui Shoko, Noborimoto Yoko, Watanabe Yosuke, Furukawa Hidemitsu

    Single Author

  • Evaluation of Slicing Software Running on Chromebooks for Applying 3D Printers in School Classes, Computer & Education, 52(0) 83-84, 2022.06

    Usui Shoko, Noborimoto Yoko, Watanabe Yosuke, Furukawa Hidemitsu

    Single Author

  • Expansion of food types via 3D food printing: artificial meat, super-care food, 4D food, and edible robots, Nippon Shokuhin Kagaku Kogaku Kaishi, 69(4) 149-153, 2022.04

    Aiso Kosuke, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • Development of a Soft Robot with Pressure Ulcer Prevention Functions, Journal of Robotics and Mechatronics, 34(2) 294-297, 2022.04

    Miyagawa Shoko, Yuasa Ryohei, Nabae Hiroyuki, Furukawa Hidemitsu, Kawakami Masaru

    Single Author

  • Local Discrimination Based on Piezoelectric Sensing in Robots Composed of Soft Matter with Different Physical Properties, Journal of Robotics and Mechatronics, 34(2) 339-350, 2022.04

    Sudo Ikuma, Ogawa Jun, Watanabe Yosuke, Shiblee MD Nahin Islam, Khosla Ajit, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • From a Deployable Soft Mechanism Inspired by a Nemertea Proboscis to a Robotic Blood Vessel Mechanism, Journal of Robotics and Mechatronics, 34(2) 234-239, 2022.04

    Tadakuma Kenjiro, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • Development of a Soft Robot with Pressure Ulcer Prevention Functions, Journal of Robotics and Mechatronics, 34(2) 294-297, 2022.04

    Miyagawa Shoko, Yuasa Ryohei, Nabae Hiroyuki, Furukawa Hidemitsu, Kawakami Masaru

    Single Author

  • Local Discrimination Based on Piezoelectric Sensing in Robots Composed of Soft Matter with Different Physical Properties, Journal of Robotics and Mechatronics, 34(2) 339-350, 2022.04

    Sudo Ikuma, Ogawa Jun, Watanabe Yosuke, Shiblee MD Nahin Islam, Khosla Ajit, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • From a Deployable Soft Mechanism Inspired by a Nemertea Proboscis to a Robotic Blood Vessel Mechanism, Journal of Robotics and Mechatronics, 34(2) 234-239, 2022.04

    Tadakuma Kenjiro, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • 4D Printing and Soft-Matter Robotics for Smart Soft-Manufacturing Solutions, Journal of the Robotics Society of Japan, 39(4) 302-305, 2021

    Furukawa Hidemitsu, Watanabe Yosuke, Islam Shiblee MD Nahin, Khosla Ajit, Ogawa Jun, Kawakami Masaru

    Single Author

  • Application of Soft Matter Actuator "Hydrogel Clipper" by 4 D Printing, Seikei-Kakou, 33(9) 309-312, 2021

    Ogawa Jun, Shiga Fumiya, Furukawa Hidemitsu

    Single Author

  • 3D Printing Toward Creative Soft Matter, Journal of the Japan Society of Colour Material, 94(11) 300-304, 2021

    SUDO Ikuma, OGAWA Jun, FURUKAWA Hidemitsu

    Single Author

  • Texture Design and Its Effect of Soft Foods Suitable for Nursing Foods Using Macroscopic 3D Structures Printed by 3D Food Printer, Japan Journal of Food Engineering, 22(4) 119-134, 2021

    HORIUCHI Mami, AKACHI Toshiyuki, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Robotic Blood Vessel Mechanism to Realize Active Self-Healing Function:- Improvement of healing performance by liquid-absorbent surface -, The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec), 2021(0) 2P3-H08, 2021

    INOMATA Shohei, FURUKAWA Hidemitsu, KONYO Masashi, TADOKORO Satoshi, YAMAZAKI Yuta, SHIGA Fumiya, KAMEOKA Masanori, SHIBLEE MD Nahin Islam, ONDA Issei, TAKANE Eri, WATANABE Masahiro, TADAKUMA Kenjiro

    Single Author

  • Latest Trend of Food 3D Printing, NIHON GAZO GAKKAISHI (Journal of the Imaging Society of Japan), 60(3) 303-307, 2021

    KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Evaluation of the Physical Properties of Shape Memory Hydrogel for Dental Application, MAXILLOFACIAL PROSTHETICS, 44(2) 48-57, 2021

    HARATA Takayuki, KOYAMA Shigeto, HOSHINO Tomohiro, IZUMITA Kuniyuki, KATO Hiroaki, SATO Naoko, KAWAKAMI Masaru, FURUKAWA Hidemitsu, SASAKI Keiichi

    Single Author

  • Evaluation of the Physical Properties of Shape Memory Hydrogel for Dental Application, MAXILLOFACIAL PROSTHETICS, 44(2) 48-57, 2021

    HARATA Takayuki, KOYAMA Shigeto, HOSHINO Tomohiro, IZUMITA Kuniyuki, KATO Hiroaki, SATO Naoko, KAWAKAMI Masaru, FURUKAWA Hidemitsu, SASAKI Keiichi

    Single Author

  • From 3D Gel Printer to Soft Robotics, Journal of The Society of Instrument and Control Engineers, 59(11) 810-816, 2020.11

    WATANABE Yosuke, OGAWA Jun, FURUKAWA Hidemitsu

    Single Author

  • From 3D Gel Printer to Soft Robotics, Journal of The Society of Instrument and Control Engineers, 59(11) 810-816, 2020.11

    WATANABE Yosuke, OGAWA Jun, FURUKAWA Hidemitsu

    Single Author

  • Rahman Julkarnyne M Habibur, The Proceedings of Conference of Tohoku Branch, 2020(0) 174_paper, 2020

    Habibur Rahman Julkarnyne M, Islam Shiblee MD. Nahin, Ajit Khosla, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • A flexible and Conductive 3d printable PVDF/DMAAm based Flurogel, 東北支部総会・講演会　講演論文集, 2020(0) 156_paper, 2020

    Rahman Md Sazzadur, Shiblee Md Nahin Islam, Khosla Ajit, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • Evaluation of compression response of 3D soft touch sensor, The Proceedings of Conference of Tohoku Branch, 2020(0) 157_paper, 2020

    HARA Yuta, YOSHIDA Kazunari, OHARA Kenichiro, HOSODA Koh, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Research on fatigue properties of hydrogel under cyclic loading, The Proceedings of Conference of Tohoku Branch, 2020(0) 173_paper, 2020

    Iijima Tetsuro, Watanabe Yosuke, Masaru Kawakami, Murasawa Go, Furukawa Hidemitsu

    Single Author

  • 3D-printable Hydrogel Capsule for Transporting Particles in Flow Channel, The Proceedings of Conference of Tohoku Branch, 2020(0) 114_paper, 2020

    Nezu Kyosuke, Makino Masato, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • Influence of Rheological Properties of 3D Food Printer Materials on Printing, The Proceedings of Conference of Tohoku Branch, 2020(0) 158_paper, 2020

    ISHIGAKI Ryo, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Soft Robotic Blood Vessel Mechanism to Realize Self-Healing Function, The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec), 2020(0) 1P2-J16, 2020

    INOMATA Shohei, IIJIMA Tetsuro, YAMAZAKI Yuta, ONDA Issei, TAKAHASHI Tomoya, WATANABE Masahiro, TADAKUMA Kenjiro, FURUKAWA Hidemitsu, KONYO Masashi, TADOKORO Satoshi

    Single Author

  • Development of whisker sensor by utilizing ion gel strain gauge, The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec), 2020(0) 1A1-K05, 2020

    KAMADA Nao, OHARA Kenichiro, HARA Yuta, YOSHIDA Kazunari, FURUKAWA Hidemitsu, HOSODA Koh

    Single Author

  • Soft Robotic Blood Vessel Mechanism to Realize Self-Healing Function, The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec), 2020(0) 1P2-J16, 2020

    INOMATA Shohei, IIJIMA Tetsuro, YAMAZAKI Yuta, ONDA Issei, TAKAHASHI Tomoya, WATANABE Masahiro, TADAKUMA Kenjiro, FURUKAWA Hidemitsu, KONYO Masashi, TADOKORO Satoshi

    Single Author

  • Development of whisker sensor by utilizing ion gel strain gauge, The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec), 2020(0) 1A1-K05, 2020

    KAMADA Nao, OHARA Kenichiro, HARA Yuta, YOSHIDA Kazunari, FURUKAWA Hidemitsu, HOSODA Koh

    Single Author

  • Recent Development in 3D Food Printing, NIHON GAZO GAKKAISHI (Journal of the Imaging Society of Japan), 58(4) 434-440, 2019

    KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • 3D printable inter cross-linking network (ICN) gels for reversible transparency control with water content, Microsyst. Technol., 1 1-5, 2019

    古川 英光

    Single Author

  • 3D Printing of Tough Gels Having Tunable Elastic Modulus from the Same Pre‐Gel Solution, Macromolecular Chemistry and Physics, 220 1800498, 2019

    古川 英光

    Single Author

  • トーラス駆動形の究極の柔軟ロボット機構を創造する, 日本機械学会誌 特集 ソフトロボット学, 122 25-27, 2019

    多田隈 建二郎, 古川 英光

    Single Author

  • 3D printer for gel/soft matter and its application, Oyo Buturi, 87(2) 111-115, 2018

    TAMATE Hideaki, MAKINO Masato, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Development of recipe determination system based on color database, The Proceedings of the Materials and processing conference, 2018(0) 405, 2018

    TAKAHASHI Mizuki, SATO Kei, SAITO Azusa, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Analysis of frequency accompanying change of moisture content of Ringing gel, The Proceedings of the Materials and processing conference, 2018(0) 917, 2018

    KAMEYAMA Takaaki, IIJIMA Tetsuro, YOSHIDA Kazunari, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • 3D printing of electrically conductive hybrid organic?inorganic composite materials, Microsystem Technologies, 24 4341-4345, 2018

    古川 英光

    Single Author

  • Separation of motile Euglena using microfluidic device, The Proceedings of Mechanical Engineering Congress, Japan, 2018(0) J0420401, 2018

    Nezu Kyosuke, Makino Masato, Takamatsu Kyuichiro, Khosla Ajit, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • 3D printing of shape memory hydrogels with tunable mechanical properties, Soft Matter, 14 7809-7817, 2018

    古川 英光

    Single Author

  • Deformation of contacting interface between polymer hydrogel and silica sphere studied by resonance shear measurement, The Journal of Chemical Physics, 149 163327, 2018

    古川 英光

    Single Author

  • Enormously Low Frictional Surface on Tough Hydrogels Simply Created by Laser-Cutting Process, Technologies, 6 82, 2018

    古川 英光

    Single Author

  • Development of soft fatigue monitoring gel, The Proceedings of the Materials and processing conference, 2018(0) 402, 2018

    Iijima Tetsuro, Saito Azusa, Murasawa Go, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • Relationship between the shape and the motion of hydrogel loaded with camphor, The Proceedings of Mechanical Engineering Congress, Japan, 2018(0) J0420404, 2018

    TAKAMATSU Kyuichiro, MAKINO Masato, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Development of viscosity measurement device and simple physical property measurement device for 3D food printer material, The Proceedings of the Materials and processing conference, 2018(0) 404, 2018

    ISHIGAKI Ryo, SUZUKI Syunsuke, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Behavior of Friction and Wear in Sliding Friction of High Strength Gel, The Proceedings of the Machine Design and Tribology Division meeting in JSME, 2018.18(0) 1C1-1, 2018

    WADA Masato, FURUKAWA Hidemitsu

    Single Author

  • 152 Development of open-source 3D gel printer “RepRap SWIM-ER", The Proceedings of Conference of Tohoku Branch, 2018.53(0) 101-102, 2018

    SATO Kei, BASHER Samiul, TAKAHASHI Mizuki, SAITO Azusa, TAKAMATSU Kyuichiro, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Food properties suitable for 3D food printer and effect on printing precision, The Proceedings of the Materials and processing conference, 2018.26(0) 918, 2018

    SUZUKI Shunsuke, ISHIGAKI Ryo, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Improve the accuracy of 3D gel printer by incorporating Scanning Microscopic Light Scattering System, The Proceedings of the Materials and processing conference, 2018.26(0) 924, 2018

    Sato Yosuke, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • Thermal conductivity and thermal effusivity of a shape memory gel, The Proceedings of the Materials and processing conference, 2018.26(0) 703, 2018

    OMOKAWA Hyune, NISIYAMA Kazuki, AKAMATSU Masato, FURUKAWA Hidemitsu

    Single Author

  • Making of pneumatic driven oceanic jellyfish robot, The Proceedings of the Materials and processing conference, 2018.26(0) 403, 2018

    TAKISHIMA Yuki, YOSHIDA Kazunari, SAITOH Azusa, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Skin function mimicry gel, The Proceedings of the Materials and processing conference, 2018.26(0) 922, 2018

    KANAI Shuma, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Development of the System for the Deformation of the Multi-Fingered Robot Hand Made of Shape Memory Gel, The Proceedings of Conference of Kansai Branch, 2018.93(0) 620, 2018

    NISHIMURA Kenta, YAMANO Mitsuhiro, YASUDA Toshihiko, NISHIOKA Yasutaka, GONG Jin, FURUKAWA Hidemitsu, TADAKUMA Riichiro

    Single Author

  • Development of a Robot Hand Using Shape Memory Gel and Wire-Driven Mechanism, The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec), 2018(0) 2P1-I07, 2018

    MIYOSHI Ryuhei, YAMANO Mitsuhiro, YASUDA Toshihiko, NISHIOKA Yasutaka, GONG Jin, FURUKAWA Hidemitsu, TADAKUMA Riichiro

    Single Author

  • Physical properties of the gel formed by low cost 3D gel printer, The Proceedings of Mechanical Engineering Congress, Japan, 2018(0) J0420405, 2018

    SAITO Azusa, SATO Kei, BASHER Samiul, YAMAZAKI Yuta, SATO Yousuke, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Development of separation device based on particle size of vesicles using margination, The Proceedings of the Materials and processing conference, 2018.26(0) 920, 2018

    ADACHI Kanako, NEZU Kyosuke, YOSHIDA Kazunari, MAKINO Masato, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Development of pressure sensing system using soft material, The Proceedings of the Materials and processing conference, 2018.26(0) 401, 2018

    HARA Yuta, YOSHIDA Kazunari, AHMED Kumkum, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Two-color modeling of gel using 3D gel printer, The Proceedings of the Materials and processing conference, 2018.26(0) 919, 2018

    YAMAZAKI Yuta, SATO Yosuke, SAITO Azusa, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • 189 Rigidity changes by transrting single poliproline helix I to II, The Proceedings of Conference of Tohoku Branch, 2018.53(0) 175-176, 2018

    Tamamushi Hironori, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • 3D-Printed Hydrogel Capsule for Transporting Particles in Flow Channel, ECS Meeting Abstracts, 2109.09

    99) Kyosuke Nezu, Masato Makino, Kyuichiro Takamatsu, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Development of soft inchworm robot with friction control of feet using double-network gel, Advanced Robotics, 1-16, 2022.12

    Moses Gladson Selvamuthu, Riichiro Tadakuma, Naofumi Fujiwara, Kazunari Yoshida, Minoru Takagi, Hiroyuki Hoshino, Yoshiyuki Suzuri, Hidemitsu Furukawa

    Single Author

  • Development of soft inchworm robot with friction control of feet using double-network gel, Advanced Robotics, 1-16, 2022.12

    Moses Gladson Selvamuthu, Riichiro Tadakuma, Naofumi Fujiwara, Kazunari Yoshida, Minoru Takagi, Hiroyuki Hoshino, Yoshiyuki Suzuri, Hidemitsu Furukawa

    Single Author

  • Gel Biter: food texture discriminator based on physical reservoir computing with multiple soft materials, Artificial Life and Robotics, 27(4) 674-683, 2022.11

    Kosuke Hirose, Ikuma Sudo, Jun Ogawa, Yosuke Watanabe, M. D. Nahin Islam Shiblee, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Gel Biter: food texture discriminator based on physical reservoir computing with multiple soft materials, Artificial Life and Robotics, 27(4) 674-683, 2022.11

    Kosuke Hirose, Ikuma Sudo, Jun Ogawa, Yosuke Watanabe, M. D. Nahin Islam Shiblee, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • MORI-A: Soft Vacuum-Actuated Module With 3D-Printable Deformation Structure, IEEE Robotics and Automation Letters, 7(2) 2495-2502, 2022.04

    Jun Ogawa, Tomoharu Mori, Yosuke Watanabe, Masaru Kawakami, MD Nahin Islam Shiblee, Hidemitsu Furukawa

    Single Author

  • Soft Resistive Tactile Sensor based on CNT-PDMS-Gel to Estimate Contact Force, IEEE Sensors Letters, 6(3) 1, 2022.03

    Muhammad Hisyam Rosle, Zhongkui Wang, Md Nahin Islam Shiblee, Kumkum Ahmed, Hidemitsu Furukawa, Shinichi Hirai

    Single Author

  • The optical microscopic observation of frictional interface between high strength gels and a glass ball by ball-on-disk method, Microsyst Technol, 28(1) 173-177, 2022.01

    Naoya Yamada, Masato Wada, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Behaviors of 3D-printed objects made of thermo-responsive hydrogels: motion in flow and molecule release ability, Microsystem Technologies, 28(1) 417-422, 2022.01

    Kazunari Yoshida, Kyosuke Nezu, Ajit Khosla, Masato Makino, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • 3D printable inter cross-linking network (ICN) gels for reversible transparency control with water content, Microsyst. Technol., 28(1) 167-171, 2022.01

    Yosuke Watanabe, Shota Inoue, Azusa Saito, Masaru Kawakawami, Hidemitsu Furukawa

    Single Author

  • Local Discrimination Based on Piezoelectric Sensing in Robots Composed of Soft Matter with Different Physical Properties, Journal of Robotics and Mechatronics, 34(2) , 2022

    Ikuma Sudo, Jun Ogawa, Yosuke Watanabe, MD Nahin, Islam Shiblee, Ajit, Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Wide-Linear Range Cholesterol Detection Using Fe2O3 Nanoparticles Decorated ZnO Nanorods Based Electrolyte-Gated Transistor, Journal of The Electrochemical Society, 169(2) , 2022

    Marya Khan, Vandana Nagal, Sakeena Masrat, Talia Tuba, Nirmalya Tripathy, Mohammad K Parvez, Mohammed S Al-Dosari, Ajit Khosla, Hidemitsu Furukawa, AK Hafiz, Rafiq Ahmad

    Single Author

  • Development and motion analysis of a light and many-joint robot finger using shape memory gel and tendon-driven mechanism with arc route, International Journal of Mechatronics and Automation, 9(2) 1, 2022

    Riichiro Tadakuma, Hidemitsu Furukawa, Kazunari Yoshida, Yasutaka Nishioka, M.D. Nahin Islam Shiblee, Toshihiko Yasuda, Akira Okamoto, Naoya Hanabata, Mitsuhiro Yamano

    Single Author

  • Development and motion analysis of a light and many-joint robot finger using shape memory gel and tendon-driven mechanism with arc route, International Journal of Mechatronics and Automation, 9(2) 1, 2022

    Riichiro Tadakuma, Hidemitsu Furukawa, Kazunari Yoshida, Yasutaka Nishioka, M.D. Nahin Islam Shiblee, Toshihiko Yasuda, Akira Okamoto, Naoya Hanabata, Mitsuhiro Yamano

    Single Author

  • Recent Advances in Electrochemical Biosensors: Applications, Challenges, and Future Scope, Biosensors, 11(9) 336, 2021.09

    Anoop Singh, Asha Sharma, Aamir Ahmed, Ashok K. Sundramoorthy, Hidemitsu Furukawa, Sandeep Arya, Ajit Khosla

    Single Author

  • 4D printing: Fundamentals, materials, applications and challenges, Polymer, 228 123926, 2021.07

    Aamir Ahmed, Sandeep Arya, Vinay Gupta, Hidemitsu Furukawa, Ajit Khosla

    Single Author

  • 4D Printed Soft-Matter Robotics: Materials, Fabrication and Applications, ECS Meeting Abstracts, 2021.05

    Hidemitsu Furukawa, Ajit Khosla

    Multiple Authorship (Only Japanese)

  • Emerging Applications of g-C3N4 Films in Perovskite-Based Solar Cells, J. Sol. State. Sci. Tech., 2021.05

    Vandana Nagal, Virendra Kumar, Rafiq Ahmad, Marya Khan, Zishan H Khan, Kedar Singh, Hidemitsu Furukawa, Ajit Khosla, Yoon Bong Hahn, Aurangzeb Khurram Hafiz

    Single Author

  • Emerging Applications of g-C3N4 Films in Perovskite-Based Solar Cells, J. Sol. State. Sci. Tech., 2021.05

    Vandana Nagal, Virendra Kumar, Rafiq Ahmad, Marya Khan, Zishan H Khan, Kedar Singh, Hidemitsu Furukawa, Ajit Khosla, Yoon Bong Hahn, Aurangzeb Khurram Hafiz

    Multiple Authorship (Including Foreigners)

  • 3D Food Printing for Soft Foods Such as Nursing Food: Effects of Protein and Gelling Agent Added to Burdock Puree on Retaining The Shape of The Discharged Line and The Printed Object, Japan Journal of Food Engineering, 22(1) 27-38, 2021.03

    Mami HORIUCHI, Toshiyuki AKACHI, Ryoji FUJII, Masaru KAWAKAMI, Hidemitsu FURUKAWA

    Single Author

  • Prototype of 32-Joint Robot Hand Using Shape Memory Gel and Tendon-Driven Mechanism, 2021 IEEE International Conference on Mechatronics (ICM), 2021.03

    Mitsuhiro Yamano, Akira Okamoto, Ryuhei Miyoshi, Toshihiko Yasuda, Yasutaka Nishioka, MD Nahin Islam Shiblee, Kazunari Yoshida, Hidemitsu Furukawa, Riichiro Tadakuma

    Single Author

  • Fully 3D-Printed Hydrogel Actuator for Jellyfish Soft Robots, ECS Journal of Solid State Science and Technology, 10(3) 037002, 2021.03

    Yuki Takishima, Kazunari Yoshida, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Dynamic X-ray elastography: A new tool for characterizing soft materials, MRS Communications, 11(1) 46-50, 2021.02

    Chika Kamezawa, Tomokazu Numano, Yoshihiko Kawabata, Shota Inoue, Masaru Kawakami, Hidemitsu Furukawa, Kazuyuki Hyodo, Wataru Yashiro

    Single Author

  • Engineered Hierarchical CuO Nanoleaves Based Electrochemical Nonenzymatic Biosensor for Glucose Detection, J. Electrochem. Soc., 168(1) , 2021.01

    Rafiq Ahmad, Marya Khan, Prabhash Mishra, Nushrat Jahan, Md Aquib Ahsan, Imran Ahmad, Mohammad Rizwan Khan, Yosuke Watanabe, Mansoor Ali Syed, Hidemitsu Furukawa, Ajit Khosla

    Single Author

  • Light Scattering and Rheological Studies of 3D/4D Printable Shape Memory Gels Based on Poly (N,N-Dimethylacrylamide-co-Stearyl Acrylate and/or Lauryl Acrylates), Polymers, 13(1) 128, 2021.01

    MD Nahin Islam Shiblee, Kumkum Ahmed, Yuta Yamazaki, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Performance analysis, challenges and future perspectives of nickel based nanostructured electrodes for electrochemical supercapacitors, Journal of Materials Research and Technology, 11 564-599, 2021

    Sonali Verma, Sandeep Arya, Vinay Gupta, Sarika Mahajan, Hidemitsu Furukawa, Ajit Khosla

    Single Author

  • Multi-Walled Carbon Nanotubes Decorated with Silver Nanoparticles for Acetone Gas Sensing at Room Temperature, J. Electrochem. Soc., 167(16) , 2020.12

    Sheng-Joue Young, Yi-Hsing Liu, Zheng-Dong Lin, Kumkum Ahmed, MD Nahin, Islam Shiblee, Sean Romanuik, Praveen Kumar Sekhar, Thomas Thundat, Larry Nagahara, Sandeep Arya, Rafiq Ahmed, Hidemitsu Furukaw...

    Single Author

  • Rheological and mechanical properties of edible gel materials for 3D food printing technology, Heliyon 6(12), e0585, 2020.12

    Julkarnyne M. Habibur Rahmana, MD Nahin Islam Shiblee, Kumkum Ahmed, Ajit Khoslaa, Masaru Kawakamia, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • 3D Printable Vapochromic Sensing Materials, J. Electrochem. Soc., 167(16) , 2020.11

    David M Stevens, Bonnie L Gray, Daniel B Leznoff, Hidemitsu Furukawa, Ajit Khosla

    Single Author

  • Flexible Ultraviolet Photodetectors Based on One-Dimensional Gallium-Doped Zinc Oxide Nanostructures, ACS Applied Electronic Materials, 2(11) 3522-3529, 2020.11

    Sheng-Joue Young, Yi-Hsing Liu, M. D. Nahin Islam Shiblee, Kumkum Ahmed, Lin-Tzu Lai, Larry Nagahara, Thomas Thundat, Tsukasa Yoshida, Sandeep Arya, Hidemitsu Furukawa, Ajit Khosla

    Single Author

  • Development of Ionic Porous Polymer for Sensing Applications, ECS Meeting Abstracts, 2020.11

    Kumkum Ahmed, Hidemitsu Furukawa, Naofumi Naga

    Multiple Authorship (Only Japanese)

  • Friction Processing and Application to High Strength Hydrogel Surface, ECS Meeting Abstracts, 2020.11

    Masato Wada, Kazunari Yoshida, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Fabrication of Polymer Gels with Double Network Using Multi-Material 2/3D Printing, ECS Meeting Abstracts, 2020.11

    Yosuke Watanabe, Fumiya Shiga, MD Nahin Islam Shiblee, Jun Ogawa, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Percolation in Multi-Walled Carbon Nanotube/Acrylonitrile Butadiene Styrene Polymer Nanocomposites Prepared by Melt Mixing and Solution Casting: Electrical Conductivity and Linear Rheology, ECS Meeting Abstracts, 2020.11

    Takafumi Kobayashi, Shunsuke Takeda, Ajit Khosla, Hidemitsu Furukawa, Masataka Sugimoto, Sathish K Sukumaran

    Multiple Authorship (Only Japanese)

  • Scanning Microscopic Light Scattering with Machine Learning for Quality Assurance of 3D-Printed Hydrogels, ECS Meeting Abstracts, 2020.11

    Hidemitsu Furukawa, Jun Ogawa, Yosuke Watanabe, MD Nahin Islam Shiblee, Ajit Khosla, Masaru Kawakami

    Multiple Authorship (Only Japanese)

  • Low-cost 3D Gel Printer as Soft and Wet Industrial Materials Easy Realizer Developed by Virtue of RepRap Open Source Project, ECS Meeting Abstracts, 2020.11

    Azusa Saito, Yuta Yamazaki, Yosuke Watanabe, MD Nahin Islam Shiblee, Ajit Khosla, Jun Ogawa, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • (Invited) 3D Printing of Soft-Matter Mono Pump in Infant Ventricular Assist Device (VAD) for Blood Pumping, ECS Transactions, 98(13) 31-38, 2020.09

    Yee Cheng Yeh, Naoya Yamada, Yosuke Watanabe, MD Nahin Islam Shiblee, Jun Ogawa, Ajit Khosla, Masaru Kawakami, Teruaki Akamatsu, Hidemitsu Furukawa

    Single Author

  • (Invited) TheSimultaneous 3D Printing of White and Transparent Gels for Medical Models, ECS Transactions, 98(13) 47-54, 2020.09

    Yuta Yamazaki, Azusa Saito, Masahiro Yamazaki, Yosuke Watanabe, MD Nahin Islam Shiblee, Ajit Khosla, Jun Ogawa, Masaru Kawakami, Jun Nango, Hidemitsu Furukawa

    Single Author

  • (Invited) Texture Control of 3D Printing: Effect of Internal Structure of 3D Printed Foods on their Fracture Process in Compression, ECS Transactions, 98(13) 59-63, 2020.09

    Shunsuke Suzuki, Jun Ogawa, Yosuke Watanabe, MD Nahin Islam Shiblee, Ajit Khosla, Masaru Kawakami, Jun Nango, Hidemitsu Furukawa

    Single Author

  • (Invited) Soft-Matter Robot That Communicates Humans By Contacting, ECS Transactions, 98(13) 65-69, 2020.09

    Takaaki Kameyama, Jun Ogawa, Yosuke Watanabe, MD Nahin Islam Shiblee, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • (Invited) Skin-Mimic Hydrogel Materials with Water-Perspiration Control for Soft Robots Developed by 3D Printing, ECS Transactions, 98(13) 23-27, 2020.09

    Shuma Kanai, Yosuke Watanabe, MD Nahin Islam Shiblee, Ajit Khosla, Jun Ogawa, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • (Invited) Material Development and Equipment Improvement for 3D Gel Printing Using a Commercially-Available Stereolithography Printer, ECS Transactions, 98(13) 93-100, 2020.09

    Yosuke Sato, Azusa Saito, Yosuke Watanabe, MD Nahin Islam Shiblee, Jun Ogawa, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • (Invited) Formation of Liposomes Containing Pre-Gel Solution and 3D-Printing Applications by Droplet-Shooting Method, ECS Transactions, 98(13) 85-92, 2020.09

    Kanako Adachi, Kazunari Yoshida, Masato Makino, Masamune Morita, Yosuke Watanabe, MD Nahin Islam Shiblee, Jun Ogawa, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Design of Hydrogel Material and 3D-Printed Molding for Imitating the Tactile Textured Properties of Moon Jellyfish, ECS Transactions, 2020.09

    Jun Ogawa, Naoya Yamada, Yosuke Watanabe, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • The Simultaneous 3D Printing of White and Transparent Gels for Medical Models, ECS Transactions, 2020.09

    Yuta Yamazaki, Azusa Saito, Masahiro Yamazaki, Yosuke Watanabe, MD Nahin Islam Shiblee, Ajit Khosla, Jun Ogawa, Masaru Kawakami, Jun Nango, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly( N , N ‐dimethylacrylamide) Based Gel Polymer Electrolytes, Macromolecular Materials and Engineering, 305(9) 2000262, 2020.09

    Md Sazzadur Rahman, MD Nahin Islam Shiblee, Kumkum Ahmed, Ajit Khosla, Jun Ogawa, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Additive Manufacturing: Sustainable Manufacturing of Flexible Sensors, Systems and Devices, ECS Meeting Abstracts, (29) , 2020.05

    Ajit Khosla, Sandeep Arya, Larry A Nagahara, Thomas Thundat, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Electrical Conductivity of Multiwalled Carbon Nanotube/Acrylonitrile Butadiene Styrene Polymer Nanocomposites prepared by Melt Mixing: Comparison of Twin Screw Extrusion and Batch Mixing, ECS Meeting Abstracts, 2020.05

    Georgia Mary Babb, Takafumi Kobayash, Ajit Khosla, Hidemitsu Furukawa, Sathish K Sukumaran

    Multiple Authorship (Only Japanese)

  • Electrical Conductivity and Linear Rheology of Multi-Walled Carbon Nanotube/Acrylonitrile Butadiene Styrene Polymer Nanocomposites Prepared By Melt Mixing and Solution Casting, ECS Meeting Abstracts, 2020.05

    Takafumi Kobayashi, Shunsuke Takeda, Ajit Khosla, Hidemitsu Furukawa, Masataka Sugimoto, Sathish K Sukumaran

    Single Author

  • 3D Printable Vapochromic Sensing Materials, 237th ECS Meeting with the 18th International Meeting on Chemical Sensors (IMCS 2020), 2020.05

    David M Stevens, Bonnie L Gray, Daniel B Leznoff, Hidemitsu Furukawa, Ajit Khosla

    Single Author

  • Review—Recent Progresses in 4D Printing of Gel Materials, Journal of The Electrochemical Society, 167(3) 037563, 2020.02

    Kumkum Ahmed, MD Nahin Islam Shiblee, Ajit Khosla, Larry Nagahara, Thomas Thundat, Hidemitsu Furukawa

    Single Author

  • Very Wide Sensing Range and Hysteresis Behaviors of Tactile Sensor Developed by Embedding Soft Ionic Gels in Soft Silicone Elastomers, ECS Journal of Solid State Science and Technology, 9(6) 061024, 2020.01

    Yuta Hara, Kazunari Yoshida, Ajit Khosla, Masaru Kawakami, Koh Hosoda, Hidemitsu Furukawa

    Single Author

  • Effect of the constituent networks of double-network gels on their mechanical properties and energy dissipation process, Soft Matter, 16(37) 8618-8627, 2020

    Tasuku Nakajima, Takayuki Kurokawa, Hidemitsu Furukawa, Jian Ping Gong

    Single Author

  • Effect of void structure on the toughness of double network hydrogels, Soft Matter, 16(37) 8618-8627, 2020

    Tasuku Nakajima, Hidemitsu Furukawa, Yoshimi Tanaka, Takayuki Kurokawa, Jian Ping Gong

    Single Author

  • Development of Touch Sensor Using Ion Gel, ECS Meeting Abstracts, 2019.09

    Yuta Hara, Kazunari Yoshida, Kumkum Ahmed, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • 3D Printable PVDF/Dmaam Based Gel Polymer Electrolyte for Lithium Ion Batteries, ECS Meeting Abstracts, 2019.09

    Md Sazzadur Rahman, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Development of Full Color 3D Gel Printer Using Color Gel System, ECS Meeting Abstracts, 2019.09

    Mizuki Takahashi, Azusa Saito, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Development of Fatigue Life Prediction Technology of Hydrogels, ECS Meeting Abstracts, 2019.09

    Tetsuro Iijima, Go Murasawa, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • 3D Printable Edible Actuator, ECS Meeting Abstracts, 2019.09

    101) Julkarnyne M Habibur Rahman, Kazunari Yoshida, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • 4D Printing of Shape‐Memory Hydrogels for Soft‐Robotic Functions, Adv. Mater. Technol., 4(8) 1900071, 2019.08

    MD Nahin, Islam Shiblee, Kumkum Ahmed, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Sliding Walk With Friction Control of Double-Network Gel on Feet of Inchworm Robot, Frontiers in Mechanical Engineering, 5 , 2019.07

    Minoru Takagi, Kazunari Yoshida, Hiroyuki Hoshino, Riichiro Tadakuma, Yoshiyuki Suzuri, Hidemitsu Furukawa

    Single Author

  • Applications of 3D printer to medical technologies, Nanofiber, 10(1) 29-34, 2019.07

    Azusa Saito, Kazunari Yoshida, Masaru Kawakami, Hidemitsu Furukawa, Akira Takagi

    Multiple Authorship (Including Foreigners)

  • Effect of nanocrystalline cellulose and zinc oxide hybrid organic–inorganic nanofiller on the physical properties of polycaprolactone nanocomposite films, Microsystem Technologies, 28(1) 143-152, 2019.06

    Magdi E. Gibril, KumKum Ahmed, Prabashni Lekha, Bruce Sithole, Ajit Khosla, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Additive Manufacturing of Microreservoir Devices for Oral Drug Delivery Using an Acculas BA-30 Micro-Stereolithography Instrument: A Feasibility Study, Journal of The Electrochemical Society, 166(9) B3257-B3263, 2019.05

    Lukas Vaut, Kristian E. Jensen, Guido Tosello, Ajit Khosla, Hidemitsu Furukawa, Anja Boisen

    Single Author

  • 3D printing of tough gels having tunable elastic modulus from the same pre-gel solution, Macromol. Chem. Phys., 220 1800498, 2019.05

    Takafumi Ota, Azusa Saito, Taishi Tase, Masanobu Tanaka, Kei Sato, Kazunari Yoshida, Kyuuichiro Takamatsu, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Flexible Prussian blue/Carbon dots nanocomposite modified exfoliated graphite paper based sensor for simultaneous monitoring of hypertension and Parkinson disease, Microsystem Technologies, 28(1) 109-119, 2019.05

    Indu Pandey, Jai Deo Tiwari, Hidemitsu Furukawa, Ajit Khosla, Praveen K. Sekhar

    Multiple Authorship (Including Foreigners)

  • Multi-Material Additive Manufacturing (3D/4D printing), ECS Meeting Abstracts, 2019.05

    98) Ajit Khosla, Samiul Basher, Thomas Thundat, Shekhar Bhansali, Larry A Nagahara, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Soft, conductive nanocomposites based on ionic liquids/carbon nanotubes for 3D printing of flexible electronic devices, Polymer Journal, 51(5) 511-521, 2019.05

    Kumkum Ahmed, Masaru Kawakami, Ajit Khosla, Hidemitsu Furukawa

    Single Author

  • Vanadium Redox Flow Batteries Fabricated by 3D Printing and Employing Recycled Vanadium Collected from Ammonia Slag, Journal of The Electrochemical Society, 166(9) B3125-B3130, 2019.04

    He Sun, Hirotaka Takahashi, Nobuyuki Nishiumi, Yuki Kamada, Kei Sato, Kyosuke Nedu, Yuta Matsushima, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa, Philipp Stadler, Tsukasa Yoshida

    Single Author

  • Electrical Conductivity and Linear Rheology of Multiwalled Carbon Nanotube/Acrylonitrile Butadiene Styrene Polymer Nanocomposites Prepared by Melt Mixing and Solution Casting, Journal of The Electrochemical Society, 166(9) B3091-B3095, 2019.04

    Sathish K. Sukumaran, Takafumi Kobayashi, Shunsuke Takeda, Ajit Khosla, Hidemitsu Furukawa, Masataka Sugimoto

    Single Author

  • 高強度ハイドロゲルのレーザー切断面における摩擦挙動, 日本物理学会講演概要集(CD-ROM), 74(1) ROMBUNNO.16pS‐PS‐75, 2019.03

    吉田一也, 矢萩光, 和田真人, 亀山敏貴, 川上勝, 古川英光, 足立幸志

    Multiple Authorship (Including Foreigners)

  • Development of Tungsten Oxide Nanoparticle Modified Carbon Fibre Cloth as Flexible pH Sensor, Scientific Reports, 9(1) 4659, 2019.03

    Mamun Jamal, Kafil M. Razeeb, Han Shao, Jahidul Islam, Irani Akhter, Hidemitsu Furukawa, Ajit Khosla

    Single Author

  • Black carbon paper based polyanthraquinone coated exfoliated graphite for flexible paper battery, Microsystem Technologies, 28(1) 59-67, 2019.03

    Indu Pandey, Jai Deo Tiwari, Tonmoy Kumar Saha, Ajit Khosla, Hidemitsu Furukawa, Praveen Kumar Sekhar

    Multiple Authorship (Including Foreigners)

  • Synthesis of joint-linker type gels and porous polymers by addition reactions of multi-functional thiol and alkyl diacrylate, diisocyanate compounds, 18 153-162, 2019.03

    Naofumi Naga, Ryo Michida, Shuntaro Kudo, Yosuke Nagami, Kazumasa Moriyama, Hassan Nageh, Hidemitsu Furukawa, Tamaki Nakano

    Single Author

  • Vanadium Redox Flow Batteries Fabricated by 3D Printing and Employing Recycled Vanadium Collected from Ammonia Slag, ECS Transactions, 88(1) 269-278, 2019.01

    He Sun, Hirotaka Takahashi, Yuki, Kamada, Kei Sato, Yuta Matsushima, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa, Philipp Stadler, Tsukasa Yoshida

    Single Author

  • Identification of novel protein domain for sialyloligosaccharide binding essential to Mycoplasma mobile gliding, FEMS Microbiology Letters, 366(3) , 2019.01

    Tasuku Hamaguchi, Masaru Kawakami, Hidemitsu Furukawa, Makoto Miyata

    Single Author

  • 高強度ハイドロゲルのレーザー加工断面における摩擦挙動, 砥粒加工学会学術講演会講演論文集(CD-ROM), 2019 ROMBUNNO.D05, 2019

    和田真人, 吉田一也, 川上勝, 足立幸志, 古川英光

    Multiple Authorship (Including Foreigners)

  • Creation of 3D Print Gel Actuator, Meeting Abstracts 51, 2268, 2019

    Yuki Takishima, Kazunari Yoshida, Azusa Saito, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Deformation Mechanism of Gel Membrane for Flexible Model Eye, The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec), 2019(0) 1P2-C07, 2019

    Takumi ADACHI, Mitsuhiro YAMANO, Toshihiko YASUDA, Yasutaka NISHIOKA, MD Nahin Islam SHIBLEE, Kazunari YOSHIDA, Hidemitsu FURUKAWA, Kyoko MURASE, Tsutomu SUNADA

    Single Author

  • Development of a Robot Hand Using Shape Memory Gel and Wire-Driven Mechanism, The Proceedings of the Dynamics & Design Conference, 2019(0) 357, 2019

    Mitsuhiro YAMANO, Ryuhei MIYOSHI, Toshihiko YASUDA, Yasutaka NISHIOKA, MD Nahin Islam SHIBLEE, Kazunari YOSHIDA, Hidemitsu FURUKAWA, Riichiro TADAKUMA

    Single Author

  • Synthesis and Mechanical Properties of IPN Gels Synthesized by Addition Reaction between Multifunctional and Bifunctional Compounds Combined with Ring-Opening Polymerization of Multifunctional-Epoxides, KOBUNSHI RONBUNSHU, 76(4) 319-329, 2019

    Naofumi NAGA, Shun FUJIOKA, Megumi KOBAYASHI, Kazumasa MORIYAMA, Hidemitsu FURUKAWA

    Single Author

  • Influence on Particle Double-Network Gels by Gamma Irradiation and Improvement of Radiation Tolerance, KOBUNSHI RONBUNSHU, 76(3) 241-247, 2019

    Katsuya KIKUCHI, Katsuhiko HIRANO, Kouichi KUROSAWA, Masaru KAWAKAMI, Hidemitsu FURUKAWA

    Single Author

  • Structural analysis of multifunctional ionic gels, ECS Transactions, 2018.12

    Kumkum Ahmed, Naofumi Naga, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Development of multi-material 3D printer, ECS Transactions, 2018.12

    95) Basher Samiul, Kumkum Ahmed, Azusa Saito, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Development of Hydrogel Fatigue Sensor, ECS Transactions, 2018.12

    94) Tetsuro Iijima, Shota Inoue, Azusa Saito, Hideaki Tamate, Ajit Khosla, Masaru Kawakami, Go Murasawa, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Separation of Motile Euglena Using Microchannel, ECS Transactions, 2018.12

    93) Kyosuke Nezu, Masato Makino, Kyuichiro Takamatsu, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Development of Color Gel System, ECS Transactions, 2018.12

    91) Mizuki Takahashi, Masanobu Tanaka, Kei Sato, Azusa Saito, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Only Japanese)

  • Extremely Soft, Conductive, and Transparent Ionic Gels by 3D Optical Printing, Macromol. Chem. Phys., 219(1800216) , 2018.11

    古川 英光

    Single Author

  • Deformation of contacting interface between polymer hydrogel and silica sphere studied by resonance shear measurement, Journal of Chemical Physics, 149(16) 163327, 2018.10

    Masashi Mizukami, Huai Yin Ren, Hidemitsu Furukawa, Kazue Kurihara

    Single Author

  • 3D printing of shape memory hydrogels with tunable mechanical properties, Soft Matter, 14(38) 7809-7817, 2018.10

    MD Nahin Islam Shiblee, Kumkum Ahmed, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • 3D printing of electrically conductive hybrid organic–inorganic composite materials, Microsystem Technologies, 24(10) 4341-4345, 2018.10

    Shreyas Shah, MD Nahin Islam Shiblee, Julkarnyne M. Habibur Rahman, Samiul Basher, Sajjad Husain Mir, Masaru Kawakami, Hidemitsu Furukawa, Ajit Khosla

    Single Author

  • Hydrogel coating on soft polymeric substrates for microfluidic devices, Microsystem Technologies, 24(10) 4383-4388, 2018.10

    Kumkum Ahmed, Naoya Yamada, Masato Wada, Toshiki Kameyama, Masaru Kawakami, Ajit Khosla, Hidemitsu Furukawa

    Single Author

  • A non enzymatic glutamate sensor based on nickel oxide nanoparticle, Microsystem Technologies, 24(10) 4217-4223, 2018.10

    Mamun Jamal, Sumon Chakrabarty, Han Shao, David McNulty, Mohammad A. Yousuf, Hidemitsu Furukawa, Ajit Khosla, Kafil M. Razeeb

    Single Author

  • Enormously Low Frictional Surface on Tough Hydrogels Simply Created by Laser-Cutting Process, Technologies, 6(3) 82, 2018.09

    Kazunari Yoshida, Hikaru Yahagi, Masato Wada, Toshiki Kameyama, Masaru Kawakami, Hidemitsu Furukawa, Koshi Adachi

    Single Author

  • Conductive Shape Memory Gels for Sensing Application, ECS Transactions, 85(13) 1433-1439, 2018.06

    Kumkum Ahmed, MD Nahin Islam Shiblee, Ajit Khosla, Hidemitsu Furukawa

    Single Author

  • 高強度ゲルのすべり摩擦における摩擦摩耗挙動, 日本機械学会機素潤滑設計部門講演会講演論文集, 18th 89‐90, 2018.04

    和田真人, 古川英光

    Multiple Authorship (Including Foreigners)

  • Development of high-strength gel dosimeter made by 3D gel printer, Nano-, Bio-, Info-Tech Sensors, and 3D Systems II, 2018.03

    Shota Inoue, Hidemitsu Furukawa, Ajit Khosla, Masaru Kawakami, Kazuyuki Sakai

    Single Author

  • Development of multi-material 3D printer, Nano-, Bio-, Info-Tech Sensors, and 3D Systems II, 2018.03

    Samiul Basher, Ajit Khosla, Hidemitsu Furukawa, Masaru Kawakami, Kumkum Ahmed, Azusa Saito

    Single Author

  • 3D printing for gel robotics, Proc. SPIE, 10597 1059717, 2018.03

    Kazunari Yoshida, Yuki Takishima, Yuta Hara, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • RepRap SWIM-ER: low cost open-source 3D gel printer, Nano-, Bio-, Info-Tech Sensors, and 3D Systems II, 2018.03

    Azusa Saito, Kei Sato, Samiul Basher, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Stereolithographic and molding fabrications of hydroxyapatite-polymer gels applicable to bone regeneration materials, Journal of the Taiwan Institute of Chemical Engineers, 92 91-96, 2018.02

    Mekuriaw A Kebede, Karen Sabrina Asiku, Toyoko Imae, Masaru Kawakami, Hidemitsu Furukawa, Chang Mou Wu

    Multiple Authorship (Including Foreigners)

  • 3D printer for gel/soft matter and its application, 応用物理, 87(2) 111-115, 2018.02

    玉手 英明, 牧野 真人, 川上 勝, 古川 英光

    Multiple Authorship (Including Foreigners)

  • Development of low viscosity gel material suitable for modeling with 3D gel printer and evaluation of mechanical properties, Transactions of the JSME (in Japanese), Volume 84(Issue 858) 17-00459, 2018.02

    TASE Taishi, SAITO Azusa, OTA Takafumi, SATO Kei, TAKAMATSU Kyuichiro, YOSHIDA Kazunari, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • A non enzymatic glutamate sensor based on nickel oxide nanoparticle, Microsystem Technologies, 24(10) 4217-4223, 2018.01

    Mamun Jamal, Sumon Chakrabarty, Han Shao, David McNulty, Mohammad A Yousuf, Hidemitsu Furukawa, Ajit Khosla, Kafil M Razeeb

    Single Author

  • 3D printing of police whistles for STEM education, Microsystem Technologies, 24(1) 745-748, 2018.01

    Masato Makino, Kodai Suzuki, Kyuichiro Takamatsu, Atsuki Shiratori, Azusa Saito, Kazuyuki Sakai, Hidemitsu Furukawa

    Single Author

  • Special issue on 4th International Conference on Smart Systems Engineering (SmaSys 2016), Microsystem Technologies, 24(1) 595, 2018.01

    Ajit Khosla, Hidemitsu Furukawa, Bernd Michel

    Single Author

  • Development of hydrogel fatigue sensor, ECS Transactions, 88(1) 69-73, 2018

    T. Iijima, S. Inoue, A. Saito, H. Tamate, A. Khosla, M. Kawakami, G. Murasawa, H. Furukawa

    Single Author

  • Tribology in High-Strength Hydrogels, トライボロジスト = Journal of Japanese Society of Tribologists, 63(5) 350-355, 2018

    吉田 一也, 和田 真人, 川上 勝, 古川 英光

    Multiple Authorship (Including Foreigners)

  • Designable Materials Science for Medical and Welfare Pioneered by 3D Gel Printer, Materia Japan, 57(4) 159-163, 2018

    Sasaki Hiroyuki, Kawakami Masaru, Furukawa Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Review - Organic-inorganic hybrid functional materials: An integrated platform for applied technologies, Journal of the Electrochemical Society, 165(8) B3137-B3156, 2018

    Sajjad Husain Mir, Larry Akio Nagahara, Thomas Thundat, Parvaneh Mokarian-Tabari, Hidemitsu Furukawa, Ajit Khosla

    Single Author

  • An expansion mechanism using the deformation of a flexible gel membrane, The Proceedings of the Materials and Mechanics Conference, 2018(0) OS0218, 2018

    Mitsuhiro YAMANO, Takumi ADACHI, Toshihiko YASUDA, Yasutaka NISHIOKA, MD Nahin Islam Nahin, Kazunari YOSHIDA, Hidemitsu FURUKAWA, Kyoko MURASE, Tsutomu SUNADA

    Single Author

  • Synthesis of Particle Double-Network Gels by Redox Polymerization, KOBUNSHI RONBUNSHU, 75(4) 381-386, 2018

    Katsuya KIKUCHI, Katsuhiko HIRANO, Kouichi KUROSAWA, Tetsuro IIJIMA, Hideaki TAMATE, Masaru KAWAKAMI, Hidemitsu FURUKAWA

    Single Author

  • Modeling of Spherical Objects Using 3D Printing of Soft and Bio-Compatible Materials, ECS Trans., 88 217-222, 2018

    Kazunari Yoshida, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Influence of 3D-printing conditions on physical properties of hydrogel objects, Mechanical Engineering Journal, 5(1) 17-00538, 2018

    OTA Takafumi, YOSHIDA Kazunari, TASE Taishi, SATO Kei, TANAKA Masanobu, SAITO Azusa, TAKAMATSU Kyuuichiro, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Single Author

  • Development of Soft Ion Gel Based Touch Sensor, ECS Trans., 88 59-67, 2018

    Yuta Hara, Kazunari Yoshida, Kumkum Ahmed, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Development of double network gel ring and evaluation of friction properties, NANO-, BIO-, INFO-TECH SENSORS, AND 3D SYSTEMS II, 10597 , 2018

    Yahagi Hikaru, Yoshida Kazunari, Wada Masato, Khosla Ajit, Kawakami Masaru, Furukawa Hidemitsu

    Single Author

  • Creation and Drive Evaluation of Jellyfish Type Autonomous Unmanned Submersible, ECS Trans., 88(1) 45-49, 2018

    Yuki Takishima, MD Nahin, Islam Shiblee, Azusa Saito, Kazunari Yoshida, Kyuichiro Takamatsu, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Single Author

  • Mechanical properties of particle double-network gels and scanning microscopic light scattering analysis of their internal structure, Kobunshi Ronbunshu, 74(6) 594-602, 2017.11

    Mei Abe, Kazuyuki Sakai, Hironori Tamamushi, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Synthesis and Properties of Multifunctional Thiol Crosslinked Gels Containing Disulfide Bond in the Network Structure, JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 55(22) 3749-3756, 2017.11

    Naofumi Naga, Kazumasa Moriyama, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Photoelastic stress measurement of DN-designable-gel using image processing, 「センサ・マイクロマシンと応用システム」シンポジウム論文集 電気学会センサ・マイクロマシン部門 [編], 34 , 2017.10

    粂野 勇貴, 安部 修平, 池田 誠一, 齊藤 梓, 川上 勝, 古川 英光, 溝尻 瑞枝, 櫻井 淳平, 秦 誠一

    Multiple Authorship (Including Foreigners)

  • Photoelasic stress measurement of PVA hydrogel vessel model, 「センサ・マイクロマシンと応用システム」シンポジウム論文集 電気学会センサ・マイクロマシン部門 [編], 34 , 2017.10

    安部 修平, 粂野 勇貴, 池田 誠一, 齊藤 梓, 川上 勝, 古川 英光, 溝尻 瑞枝, 櫻井 淳平, 秦 誠一

    Multiple Authorship (Including Foreigners)

  • 高分子シール材ゲルOリングの開発, 高分子学会予稿集(CD-ROM), 66(2) ROMBUNNO.1V14, 2017.09

    矢萩光, 和田真人, 吉田一也, 川上勝, 古川英光

    Multiple Authorship (Including Foreigners)

  • Synthesis and properties of multifunctional thiol crosslinked gels containing disulfide bond in the network structure, Polymer Chemistry, 55(22) 3749-3756, 2017.08

    Naofumi Naga, Kazumasa Moriyama, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of 3D Gel Printer and High Strength Gel : Outlook of Shift to Open Source, プラスチックスエージ = Plastics age, 63(6) 80-82, 2017.06

    齊藤 梓, 佐藤 慧, 川上 勝, 古川 英光

    Multiple Authorship (Including Foreigners)

  • Smart walking stick for blind people: an application of 3D printer, Proc. SPIE 10167, Nanosensors, Biosensors, Info-Tech Sensors and 3D Systems 2017, 2017.04

    Md. Allama Ikbal ; Faidur Rahman ; Md. Ripon Ali ; M. Hasnat Kabir ; Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Design of the mechanical properties of the gel by the 3D gel printer "SWIM-ER", Proc. SPIE 10167, Nanosensors, Biosensors, Info-Tech Sensors and 3D Systems 2017, 2017.04

    Azusa Saito , Takafumi Ota , Taishi Tase , Kyuichiro Takamatsu , Masaru Kawakami , Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of low-cost open source 3D gel printer “RepRap SWIM-ER”, SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, 2017.04

    Kei Sato, Samiul Basher, Takafumi Ota, Taishi Tase, Kyuichiro Takamatsu, Azusa Saito, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Single molecule dynamics of polyproline by using AFM, Proc. SPIE 10167, Nanosensors, Biosensors, Info-Tech Sensors and 3D Systems 2017, 2017.04

    Hironori Tamamushi, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Poly ionic liquid based nano composites for smart electro-mechanical devices, Proc. SPIE 10167, Nanosensors, Biosensors, Info-Tech Sensors and 3D Systems 2017, 2017.04

    Kumkum Ahmed, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Simulation of 3D food printing extrusion and deposition, Proc. SPIE 10167, Nanosensors, Biosensors, Info-Tech Sensors and 3D Systems 2017, 2017.04

    Masato Makino ; Daisuke Fukuzawa ; Takahiro Murashima ; Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D printing in social education: Eki-Fab and student PBL, Proc. SPIE 10167, Nanosensors, Biosensors, Info-Tech Sensors and 3D Systems 2017, 2017.04

    Masato Makino, Azusa Saito, Mai Kodama, Kyuuichiro Takamatsu, Hideaki Tamate, Kazuyuki Sakai, Masato Wada, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Evaluation of 3D Printer Accuracy in Producing Fractal Structure, Journal of Oleo Science, 66(4) 383-389, 2017.04

    Kana Kikegawa, Kyuuichirou Takamatsu, Masaru Kawakami, Hidemitsu Furukawa, Hiroyuki Mayama, Yoshimune Nonomura

    Multiple Authorship (Including Foreigners)

  • Evaluation of internal network structure of transparent shape memory gels and application of T-SMG to develop gel devices, Microsystem 　　Technologies, 23(1) 1-7, 2017.04

    Hiroaki Kumagai, Kazuyuki Sakai, Masaru Kawakami, Hidemitsu Furukawa, Kyoko Murase, Tsutom Sunada

    Multiple Authorship (Including Foreigners)

  • Evaporation of droplets: the effect of interaction between droplets and the existence of obstacles, Microsystem Technologies vol.23, 1(173) 1-6, 2017.03

    Muhamad Firdaus bin Daud，Kyuuichiro Takamatsu，Masato MakinoEmail author，Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D printing of police whistles for STEM education, Microsystem Technologies, 23(1) 1-4, 2017.03

    Masato Makino, Kodai Suzuki, Kyuichiro Takamatsu, Atsuki Shiratori, Azusa Saito, Kazuyuki Sakai & Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Electric control of friction on surface of high-strength hydrogels, Microsystem 　　Technologies, 23(1) 1-8, 2017.03

    Masato Wada, Kohei Yamada, Toshiki Kameyama, Naoya Yamada, Kazunari Yoshida, Azusa Saito, Masato Makino, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa,

    Multiple Authorship (Including Foreigners)

  • Highly Robust and Low Frictional Double-Network Ion Gel, Advanced Materials Interfaces, 4(9) , 2017.03

    Hiroyuki Arafune,Saika Honma,Takashi Morinaga,Toshio Kamijo,Miki Miura,Hidemitsu Furukawa,Takaya Sato

    Multiple Authorship (Including Foreigners)

  • A Low Cost Sensor Based Agriculture Monitoring System Using Polymeric Hydrogel, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 164(5) B3107-B3112, 2017

    M. Hasnat Kabir, Kumkum Ahmed, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of polymer gel ring and evaluation of friction properties, The Proceedings of Mechanical Engineering Congress, Japan, 2017(0) S1110302, 2017

    YAHAGI Hikaru, WADA Masato, YOSHIDA Kazunari, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Frontiers of Soft-matter Robotics, The Proceedings of Mechanical Engineering Congress, Japan, 2017(0) , 2017

    FURUKAWA Hidemitsu, TAMATE Hideaki, KAWAKAMI Masaru, KHOSLA Ajit, MAKINO Masato, SAKAI Kazuyuki, SAITO Azusa, YOSHIDA Kazunari, TAKAMATSU Kyuichiro, KODAMA Mai

    Multiple Authorship (Including Foreigners)

  • Sphere Modeling with Biocompatible and Flexible Material, The Proceedings of Mechanical Engineering Congress, Japan, 2017(0) , 2017

    YOSHIDA Kazunari, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Modeling of anisotropic gel by 3D gel printer, The Proceedings of Mechanical Engineering Congress, Japan, 2017(0) , 2017

    SAITO Azusa, SATO Kei, OTA Takafumi, TASE Taishi, TAKAMATSU Kyuichiro, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Stress measurement of designable-gel using photoelastic method, The Proceedings of Mechanical Engineering Congress, Japan, 2017(0) , 2017

    KUMENO Yuki, ABE Shuhei, IKEDA Seiichi, SAITO Azusa, KAWAKAMI Masaru, FURUKAWA Hidemitsu, MIZOSHIRI Mizue, SAKURAI Junpei, HATA Seiichi

    Multiple Authorship (Including Foreigners)

  • Single Molecular Dynamics by using AFM, The Proceedings of Mechanical Engineering Congress, Japan, 2017(0) , 2017

    TAMAMUSHI Hironori, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Development of high-strength gel dosimeter made by 3D gel printer, The Proceedings of Mechanical Engineering Congress, Japan, 2017(0) , 2017

    INOUE Shota, SAKAI Kazuyuki, KHOSLA Ajit, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Photoelastic stress measurement of PVA hydrogel using image processing, The Proceedings of Mechanical Engineering Congress, Japan, 2017(0) , 2017

    ABE Shuhei, KUMENO Yuki, IKEDA Seiichi, SAITO Azusa, KAWAKAMI Masaru, FURUKAWA Hidemitsu, MIZOSHIRI Mizue, SAKURAI Junpei, HATA Seiichi

    Multiple Authorship (Including Foreigners)

  • 低価格オープンソース3Dゲルプリンター"RepRap SWIM-ER"の開発, 年次大会, 10167(0) , 2017

    佐藤 慧, Basher Samiul, 齊藤 梓, 太田 崇文, 田勢 泰士, 川上 勝, 古川 英光

    Multiple Authorship (Including Foreigners)

  • Fluorescence Resonance Energy Transfer of Fluorescent Molecules in Joint-Linker Type Organic-Inorganic Hybrid Gels, Macromolecular Chemistry and Physics, 217(24) 2671-2678, 2016.12

    Naofumi Naga, Saki Hashimoto, Tomoharu Miyanaga, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Sensor Based Low Cost Agriculture Monitoring System Using Polymeric Hydrogel, ECS Trans., 75(17) 49-56, 2016.09

    M. H. Kabir, K. Ahmed, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Synthesis and properties of organic–inorganic hybrid liquid crystal gels, Liquid Crystals, 43(11) 1616-1625, 2016.09

    Naofumi Naga, Ayaka Okada, Yuka Satoh, Hidemitsu Furukawa, Takahiro Yamamot

    Multiple Authorship (Including Foreigners)

  • Analysis of deposition modeling by particle method simulation, Microsystem Technologies , 22 1-5, 2016.06

    Masato Makino, Daisuke Fukuzawa, Takahiro Murashima, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of ionic gels using thiol-based monomers in ionic liquid, SPIE2016, 2016.04

    Kumkum Ahmed, Naofumi Naga, Shibaura, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Internal structure analysis of particle-double network gels used in a gel organ replica, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016.04

    Mei Abe, Masanori Arai, Azusa Saito, Kazuyuki Sakai, Masaru, Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Imaging of the nano-structure of soft and wet materials by new type of DLS method, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016.04

    Kazuyuki Sakai, Hiroaki Kumagai, Mei Abe, Yuta Watanabe, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Friction and wear evaluation of high-strength gel, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016.04

    Toshiki Kameyama, Masato Wada, Masato Makino, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Single molecule force spectroscopy study of y-polyglutamic acid by using atomic force microscopy, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016.04

    Parbhej Ahamed, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Establishment of gel materials with different mechanical properties by 3D gel printer “SWIM-ER”, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016.04

    Takafumi Ota, Taishi Tase, Koji Okada, Kyuichiro Takamatsu, Azusa Saito, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Modeling the transparent shape memory gels by 3D printer Acculas, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016.04

    Hiroaki Kumagai, Masanori, Arai, Kazuyuki Sakai, Gong Jin, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of gel materials with high transparency and mechanical strength for use with a 3D gel printer SWIM-ER, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016.04

    Taishi Tase, Koji Okada, Kyuichiro, Takamatsu, Azusa Saito, Masaru, Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Investigation of mechanical properties and internal structure of novel ionic double-nework gels and comparison with conventional hydrogels, Microsystem Technologies, 22(1) 17-24, 2016.01

    Kumkum Ahmed, Yosuke Watanabe, Tomoya Higashihara, Hiroyuki Arafune, Toshio Kamijo, Takashi Morinaga, Takaya Sato, Masato Makino, Masaru Kawakami, Hidemitsu Furukaw

    Multiple Authorship (Including Foreigners)

  • Friction measurement of functional gel mechanical materials, Microsystem Technologies, 22 77-81, 2016.01

    M. Wada, T. Kameyama, M. Arai, K. Yamada, N. Yamada, M. Makino, M. Kawakami, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Reconsideration on structural anisotropy of silica hydrogels prepared in magnetic field, Microelectronic Engineering, 150 43-46, 2016.01

    A Mori, T Kaito, H Furukawa

    Multiple Authorship (Including Foreigners)

  • Synthesis and Structure of Organic-Inorganic Hybrid Semi-interpenetrating Polymer Network Gel, International Journal of Chemistry, 8(1) 165-177, 2016

    N Naga, Y Uchiyama, Y Takahashi, H Furukawa

    Multiple Authorship (Including Foreigners)

  • The effect of cross-linker concentration on the physical properties of poly (dimethyl acrylamide-co-stearyl acrylate)-based shape memory hydrogels, Microelectronic Engineering , 150 165-177, 2016

    MH Kabir, K Ahmed, H Furukawa

    Multiple Authorship (Including Foreigners)

  • Synthesis and Structure of Organic-Inorganic Hybrid Semi-interpenetrating Polymer Network Gels, International Journal of Chemistry, 8(1) 165-177, 2016

    N Naga, Y Uchiyama, Y Takahashi, H Furukawa

    Multiple Authorship (Including Foreigners)

  • Low Frictional Properties of High Strength Gels and Their Application, 日本接着学会誌 = Journal of the Adhesion Society of Japan : adhesion, 52(9) 281-286, 2016

    山田 直也, 和田 真人, 古川 英光

    Multiple Authorship (Including Foreigners)

  • <b>3-D Gel Printing </b>, Journal of Network Polymer,Japan, 37(2) 81-87, 2016

    Okada Koji, Watanabe Yosuke, Saito Azusa, Kawakami Masaru, Furukawa Hidemitsu

    Multiple Authorship (Including Foreigners)

  • 169 Free forming of gels with 3D gel printer SWIM-ER, The Proceedings of Conference of Tohoku Branch, 2016(0) 135-136, 2016

    OKADA Koji, SATOU Kei, TASE Taishi, OTA Takahumi, TAKAMATU Kyuitiro, SAITO Azusa, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • 185 Development of Gel Chemical Transistor by Applicating Shape Memory Gels, The Proceedings of Conference of Tohoku Branch, 2016(0) 167-168, 2016

    Arai Masanori, Kumagai Hiroaki, Gong Jin, Makino Masato, Kawakami Masaru, Furukawa Hidemitsu

    Multiple Authorship (Including Foreigners)

  • New Industry Creation and Human Resource Development in the Field of 3D Printing by the Collaboration Between Academics and Local Business/Community, Sen-i Gakkaishi, 72(12) P-554-P-556, 2016

    SAITO AZUSA

    Multiple Authorship (Including Foreigners)

  • Development of organ models and blood vessel models by 3D gel printer "SWIM-ER", The Proceedings of Mechanical Engineering Congress, Japan, 2016(0) , 2016

    OTA Takafumi, TASE Taishi, TAKAMATSU Kyuuichiro, SAITO Azusa, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Introduction of Soft & Wet Matter Engineering Laboratory at Yamagata University, Especially 3D Gel Printer and Applications of High Strength Gel, Sen'i Gakkaishi, 72(12) P-557-P-559, 2016

    SAKAI KAZUYUKI

    Multiple Authorship (Including Foreigners)

  • 150 Frictional properties of high strength gels, The Proceedings of Conference of Tohoku Branch, 2016(0) 97-98, 2016

    KAMEYAMA Toshiki, WADA Masato, MAKINO Masato, KAWAKAMI Masaru, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • グリーントライボ・イノベーション・ネットワーク ゲルトライボロジー グリーントライボ・イノベーション・ネットワークにおける微細加工・設計チームの取組みから, 月刊トライボロジー, (339) 24-26, 2015.11

    亀山敏貴, 山田耕平, 山田直也, 和田真人, 古川英光

    Multiple Authorship (Including Foreigners)

  • 高強度ゲルの摩擦・摩耗, 高分子学会予稿集(CD-ROM), 64(2) ROMBUNNO.2M07, 2015.08

    亀山敏貴, 和田真人, 牧野真人, 川上勝, 古川英光

    Multiple Authorship (Including Foreigners)

  • Friction of polymer hydrogels studied by resonance shear measurements, Soft Matter, 11(31) 6192-6200, 2015.08

    Huai Yin Ren, Masashi Mizukami, Tadao Tanabe, Hidemitsu Furukawa, Kazue Kurihara

    Multiple Authorship (Including Foreigners)

  • Friction Behavior of Polymer Gels, オレオサイエンス, 15(5) 213-221, 2015.05

    和田真人, GONG Jin, 古川英光

    Multiple Authorship (Including Foreigners)

  • Gel Chemical Transistor, SPIE 2015, 2015.03

    Masanori Arai, Jin Gong, Masato Makino, M, Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3-D Gel Printing for Soft-matter System Innovation, SPIE 2015, 2015.03

    Furukawa Hidemitsu, Kawakami Masaru, Gong Jin, Makino Masato, Kabir M. Hasnat, Saito Azusa

    Multiple Authorship (Including Foreigners)

  • Observation of the Characteristic Properties in Soft and Wet Friction of Gel Engineering Materials, SPIE 2015, 2015.03

    Naoya Yamada, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Ionic Iiquid based multifunctional double network gel, SPIE 2015, 2015.03

    Kumkum Ahmed, Tomoya Higashihara, Hiroyuki Arafune, Toshio Kamijo, Takashi Morinaga, Takaya Sato, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • The effect of crosslinker concentration in the Physical properties of Shape Memory Gel, SPIE2015, 2015.03

    M. Hasnat Kabir, Kumkum Ahmed, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D gel printing for soft-matter systems innovation, SPIE2015, 2015.03

    Hidemitsu Furukawa, Masaru Kawakami, Jin Gong, Masato Makino, M Hasnat Kabir, Azusa Saito

    Multiple Authorship (Including Foreigners)

  • Free forming of the gel by 3D gel pronter SWIM-ER, SPIE 2015, 2015.03

    Koji Okada, Taishi Tase, Azusa Saito, Masato Makino, Jin Gong, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D Gel Pronter for Creating Order-made Meals, SPIE 2015, 2015.03

    Jin Gong, Ryo Serizawa, Chika Sasaki, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • The friction measurement of functional gel mechanical materials using mechanical fixation, SPIE 2015, 2015.03

    Masato Wada, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • CHEMICALLY CROSS-LINKED HYDROGEL HAVING HIGH MECANICAL STRENGTH, European Scientific Journal, 11(6) , 2015.02

    M. Hasnat Kabir, Yoshitaka Amano, Sho Harada, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Bacterial cellulose gels with high mechanical strength, MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 47 57-62, 2015.02

    Yukari Numata, Tadanori Sakata, Hidemitsu Furukawa, Kenji Tajima

    Multiple Authorship (Including Foreigners)

  • ゲルとプラスチック樹脂の3D造形時の積層方向と物性の関係, 高分子ゲル研究討論会講演要旨集, 26th 57-58, 2015.01

    太田崇文, 田勢泰士, 岡田耕治, 和田真人, 齊藤梓, GONG Jin, 牧野真人, KABIR M. Hasnat, 川上勝, 古川英光

    Multiple Authorship (Including Foreigners)

  • DNゲルの摩擦界面顕微と摩擦挙動, 高分子ゲル研究討論会講演要旨集, 26th 53-54, 2015.01

    亀山敏貴, 和田真人, 山田航平, 山田直也, KABIR M. Hasnat, 齋藤梓, GONG Jin, 牧野真人, 川上勝, 古川英光

    Multiple Authorship (Including Foreigners)

  • 電場によるゲル機械材料の表面摩擦コントロール, 高分子ゲル研究討論会講演要旨集, 26th 99-100, 2015.01

    山田航平, 和田真人, 亀山敏貴, 渡邉洋輔, 斎藤梓, GONG Jin, 牧野真人, KABIR M. Hasnat, 川上勝, 古川英光

    Multiple Authorship (Including Foreigners)

  • Bacterial cellulose gels with high mechanical strength, Materials Science and Engineering: C, 47 57-62, 2015

    Yukari Numata, Tadanori Sakata, Hidemitsu Furukawa, Kenji Tajima

    Multiple Authorship (Including Foreigners)

  • 食品用3Dゲルプリンタを用いた食の創成, 日本機械学会論文集, 81(829) 15-00008, 2015

    設楽真理子, 宮瑾, 芹澤凌, 牧野真人, 西岡昭博, 古川英光

    Multiple Authorship (Including Foreigners)

  • Reconsideration on structural anisotropy of silica hydrogels prepared in magnetic field, Colloids and Surfaces A: Physicochem. Eng. Aspects 482, 485 464-467, 2015

    A Mori, T Kaito, H Furukawa

    Multiple Authorship (Including Foreigners)

  • Anisotropic Gelation Induced by Very Little Amount of Filamentous Actin, Macromolecular Chemistry and Physics, 216(20) 2007-2011, 2015

    K Shikinaka, M Misu, H Furukawa, A Kakugo, JP Gong

    Multiple Authorship (Including Foreigners)

  • Synthesis and optical properties of σ–π conjugated organic–inorganic hybrid gels, Journal of Polymer Science Part A: Polymer Chemistry, 53(11) 1360-1368, 2015

    N Naga, H Nagino, M Iwashita, T Miyanaga, H Furukaw

    Multiple Authorship (Including Foreigners)

  • Friction of polymer hydrogels studied by resonance shear measurements, Soft matter, 11(31) 6192-6200, 2015

    HY Ren, M Mizukami, T Tanabe, H Furukawa, K Kurihara

    Multiple Authorship (Including Foreigners)

  • The Network Structure and the Drug Release Characteristics of Agar Gel and Xanthan Gum-Locust Bean Gum Complex Gel, KOBUNSHI RONBUNSHU, 72(2) 57-63, 2015

    Y Hishikawa, Y Kakino, H Furukawa, K Tahara, H Takeuchi

    Multiple Authorship (Including Foreigners)

  • Structure and formation processes of syndiotactic-polystyrene or styrene-based copolymer-organic solvent gels studied using scanning microscopic light scattering, Polymer Journal, 47(1) 45-52, 2015

    N Naga, T Sakurai, H Furukawa

    Multiple Authorship (Including Foreigners)

  • In Situ Observation of Hydrogel Frictional Interface by a Micro FTIR-ATR Spectroscopy, JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 60(1) 68-74, 2015

    HOSHI Yasushi, TAKIWATARI Koji, NANAO Hidetaka, YASHIRO Hitoshi, WADA Masato, FURUKAWA Hidemitsu, MORI Shigeyuki

    Multiple Authorship (Including Foreigners)

  • Ionic Liquid Based Multifunctional Double Network Gel, BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2015, 9432 943210, 2015

    Kumkum Ahmed, Tomoya Higashihara, Hiroyuki Arafune, Toshio Kamijo, Takashi Morinaga, Takaya Sato, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • The effect of cross-linker concentration in the physical properties of shape memory gel, BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2015, 9432 , 2015

    M. Hasnat Kabir, Kumkum Ahmed, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D Printing Technology of Tissues and Organs Using the 3D Gel Printer, 細胞工学, 34(2) 184-189, 2015

    齊藤 梓, 川上 勝, 古川 英光

    Multiple Authorship (Including Foreigners)

  • 高強度ゲルの摩擦摩耗評価, 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM), 2015 ROMBUNNO.B36, 2015

    亀山敏貴, 和田真人, 牧野真人, 川上勝, 古川英光

    Multiple Authorship (Including Foreigners)

  • Birefringence of silica hydrogels prepared under high magnetic fields reinvestigated, MATERIALS RESEARCH EXPRESS, 1(4) 1-15, 2014.12

    Atsushi Mori, Takamasa Kaito, Hidemitsu Furukawa, Masafumi Yamato, Kohki Takahashi

    Multiple Authorship (Including Foreigners)

  • Smart hydrogel with shape memory for biomedical applications, JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 45(6) 3134-3138, 2014.11

    M. Hasnat Kabir, Takahiro Hazama, Yosuke Watanabe, Jin Gong, Kyoko Murase, Tsutomu Sunada, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Design Of Realistic Eye Model With Smart Shape Memory Gel (SMG), Proceedings of the JSME/ASME 2014 International Conference on Materials and Processing (ICM&P2014), Paper No. ICMP2014-5035 , 2014.09

    Yosuke Watanabe, Jin Gong, Shota Murata, Makino Masato, M. Hasnat Kabir, Kyoko Murase, Tsutomu Sunada, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Frictional Measurement of Gel Engineering Materials with Laser Processed Surface, Proceedings of the JSME/ASME 2014 International Conference on Materials and Processing (ICM&P2014), Paper No. ICMP2014-5024 , 2014.09

    Naoya Yamada, Jin Gong, Masato Makino, M. Hasnat Kabir, Keisuke Maekawa, Masato Wada, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Mechanical properties of polymeric shape memory hydrogel, Proceedings of the JSME/ASME 2014 International Conference on Materials and Processing (ICM&P2014), Paper No. ICMP2014-4950 , 2014.09

    M. Hasnat Kabir, Masato Makino, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Creation of the Food Ink Applicable in a 3D Food Printer, Proceedings of the JSME/ASME 2014 International Conference on Materials and Processing (ICM&P2014), Paper No. ICMP2014-4939 , 2014.09

    Jin Gong, Mariko Shitara, Ryo Serizawa, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Shape Memory Gel Having Inter-Crosslinking Network Structure, Proceedings of the JSME/ASME 2014 International Conference on Materials and Processing (ICM&P2014), Paper No. ICMP2014-4938 , 2014.09

    Jin Gong, Yoshitaka Amano, M. Hasnat Kabir, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Birefringence of silica hydrogels prepared under high magnetic fields reinvestigated, Mater. Res. Express, 1 , 2014.09

    Atsushi Mori, Takamasa Kaito, Hidemitsu Furukawa, Masafumi Yamato and Kohki Takahashi

    Multiple Authorship (Including Foreigners)

  • 3Dゲルプリンターを用いたゲル柔軟膜の開発, 高分子学会予稿集(CD-ROM), 63(2) ROMBUNNO.3PD040, 2014.09

    齊藤梓, 岡田耕治, 田勢泰士, 和田真人, 川上勝, 古川英光, 田中正隆

    Multiple Authorship (Including Foreigners)

  • Particle Dispersion Simulator for Gel Printer, Materials Science Forum, 783-786 2333-2338, 2014.05

    Masato Makino, M. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Synthesis and Optical Properties of Organic- Inorganic Hybrid Semi- Interpenetrating Polymer Network Gels Containing Polyfluorenes, JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 52(7) 973-984, 2014.04

    Naofumi Naga, Tomoharu Miyanaga, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Meso-Decorated Switching-knot Gels, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc., 0120471-0120475, 2014.03

    Jin Gong, Kensuke Sawamura, Masato Makino, M. H. Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Imaging of Internal Structure in Gel Engineering Materials with Visual Scanning Microscopic Light Scattering, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc., 0120491-0120494, 2014.03

    Yosuke WATANABE, Jin GONG, Masato MAKINO, M. Hasnat KABIR, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Observation of the birefringence in the friction interface with polarizing microscope, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc., 0140201-0140204, 2014.03

    Naoya YAMADA, Jin GONG, Masato WADA, Masato MAKINO, M. Hasnat KABIR, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Silver nanowires (AgNWs) embedded electrodes for gel actuator, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc. , 0120501-0120504, 2014.03

    Yuta ABE, Jin GONG, M. Hasnat KABIR, Masato MAKINO, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Surface friction of double network gels and shape memory gels, Masato Wada, Jin Gong, Masato Makino, Muhamado H. Kabir, Hidemitsu Furukawa, 0120421-0120426, 2014.03

    Masato Wada, Jin Gong, Masato Makino, Muhamado H. Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • The Applications of Shape Memory Gel as a Smart Material, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc., 0120481-0120484, 2014.03

    M. Hasnat Kabir, Jin Gong, Yosuke Watanabe, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Experiments of a Variable Stiffness Robot Using Shape Memory Gel, Proceedings of the 2013 IEEE/SICE International Symposium on System Integration, 647-652, 2014.03

    Mitsuhiro Yamano, Daisuke Goto, Kenji Ujiie, Naoki Akiba, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D jet printer of edible gels for food creation, SPIE 2015, 2014.03

    Ryo Serizawa, Mariko Shitara, Jin Gong, Masato Makino, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Free forming of the gel by 3D gel printer SWIM-ER, SPIE 2015, 2014.03

    Koji Okada, Taishi Tase, Azusa Saito, Masato Makino, Jin Gong, Masaru Kawakami, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D printing of soft and wet systems benefit from hard-to-soft transition of transparent shape memory gels, 2014SPIE Smart Structures/NDE, 2014.03

    Hidemitsu Furukawa, Jin Gong, Masato Makino

    Multiple Authorship (Including Foreigners)

  • 3D jet printer of edible gels for food creation, 2014SPIE Smart Structures/NDE, 2014.03

    Ryo Serizawa, Mariko Shitara, Kouki Yamamoto, Jin Gong, Masato Makino, Md. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Non-destructive examination system of vitreous body, 2014SPIE Smart Structures/NDE, 2014.03

    Takuma Shibata, Jin Gong, Yosuke Watanabe, Md. Hasnat Kabir, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of a standard method to observe the surface friction of high-strength gels, 2014SPIE Smart Structures/NDE, 2014.03

    Kouhei Yamada, Naoya Yamada, Yosuke Watanabe, Masato Wada, Jin Gong, Masato Makino, Md. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D scanning of internal structure in gel engineering materials with visual scanning microscopic light scattering, 2014SPIE Smart Structures/NDE, 2014.03

    Yosuke Watanabe, Jin Gong, Masato Makino, Md. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Frictional properties of gel engineering materials with laser surface texturing, 2014SPIE Smart Structures/NDE, 2014.03

    Naoya Yamada, Jin Gong, Masato Makino, Md. Hasnat Kabir, Keisuke, Maekawa, Masato Wada, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Frictional properties of high functional gel materials, 2014SPIE Smart Structures/NDE, 2014.03

    Masato Wada, Kohei Yamada, Naoya Yamada, Masato Makino, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Lateral migration of particles in the Newtonian fluid, 2014SPIE Smart Structures/NDE, 2014.03

    Masato Makino, Md. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Transparency-switching shape memory gels, 2014SPIE Smart Structures/NDE, 2014.03

    Jin Gong, Masanori Arai, Shota Murata, Md. Hasnat Kabir, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Beta-phase poly(vinylidene fluoride) fabrication under droplet drying process, 2014SPIE Smart Structures/NDE, 2014.03

    Go Murasawa, Noriyasu Yamada, Ken Miyata, Akihiro Nishioka, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Lateral migration of particles in the Newtonian fluid, 2014SPIE Smart Structures/NDE, 9060-21 , 2014.03

    Masato Makino, Md. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D Printing of Meso-Decorated Gels and Foods, Materials Science Forum, 783-786 1250-1254, 2014.03

    Jin Gong, Mariko Shitara, Ryo Serizawa, Masato Makino, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Meso-Decorated Switching-knot Gels, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc., 0120471-0120475, 2014.03

    Jin Gong, Kensuke Sawamura, Masato Makino, M. H. Kabir, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • The Applications of Shape Memory Gel as a Smart Material, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc., 0120481-0120484, 2014.03

    M. Hasnat Kabir, Jin Gong, Yosuke Watanabe, Masato Makino, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Surface friction of double network gels and shape memory gels, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc., 0120421-0120426, 2014.03

    Masato Wada, Jin Gong, Masato Makino, Muhamado H. Kabir, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Silver nanowires (AgNWs) embedded electrodes for gel actuator, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc., 0120501-0120504, 2014.03

    Yuta ABE, Jin GONG, M. Hasnat KABIR, Masato MAKINO, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Observation of the birefringence in the friction interface with polarizing microscope, Proceedings of the 12th Asia Pacific Physics ConferenceJPS Conf. Proc., 0140201-0140204, 2014.03

    Naoya YAMADA, Jin GONG, Masato WADA, Masato MAKINO, M. Hasnat KABIR, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Beta-phase poly(vinylidene fluoride) fabrication under droplet drying process, 2014SPIE Smart Structures/NDE, 9060-21 , 2014.03

    Go Murasawa, Noriyasu Yamada, Ken Miyata, Akihiro Nishioka, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 機能性ゲル機械材料の界面摩擦, 高分子ゲル研究討論会講演要旨集, 25th 41-42, 2014.01

    和田真人, 山田直也, 山田航平, 山田克弥, 牧野真人, GONG Jin, 古川英光

    Multiple Authorship (Including Foreigners)

  • ゲル機械材料の摩擦界面観察・摩擦測定装置, 高分子ゲル研究討論会講演要旨集, 25th 43-44, 2014.01

    山田直也, GONG Jin, KABIR M. Hasnat, 牧野真人, 和田真人, 古川英光

    Multiple Authorship (Including Foreigners)

  • High-strength network structure of jungle-Gym type polyimide gels studied with scanning microscopic light scattering, Mechanics and Model-Based Control of Advanced Engineering Systems, 103-111, 2014.01

    Hidemitsu Furukawa, Noriko Tan, Yosuke Watanabe, Jin Gong, M. Hasnat Kabir, Ruri Hidema, Yoshiharu Miyashita, Kazuyuki Horie, Rikio Yokota

    Multiple Authorship (Including Foreigners)

  • Turbulent flow characteristics controlled by polymers, Mechanics and Model-Based Control of Advanced Engineering Systems, 163-170, 2014.01

    Ruri Hidema, Naoya Yamada, Hiroshi Suzuki, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Smart hydrogel with shape memory for biomedical applications, Journal of the Taiwan Institute of Chemical Engineering, 45 3134-3138, 2014

    M. Hasnat Kabir, Takahiro Hazama, Yosuke Watanabe, Jin Gong, Kyoko Murase, Tsutomu Sunada

    Multiple Authorship (Including Foreigners)

  • 3D Printing of Meso-Decorated Gels and Foods, Materials Science Forum, 783-786 1250-1254, 2014

    Jin Gong, Mariko Shitara, Ryo Serizawa, Masato Makino, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Particle Dispersion Simulator for Gel Printer, Materials Science Forum, 783-786 2333-2338, 2014

    Masato Makino, M. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Structural Analysis of Shape Memory Gel, Advanced Materials Research, 922 248-253, 2014

    M. Hasnat Kabir, Masato Makino, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Non-destructive Examination System of Vitreous Body, NANOSENSORS, BIOSENSORS, AND INFO-TECH SENSORS AND SYSTEMS 2014, 9060 , 2014

    Takuma Shibata, Jin Gong, Yosuke Watanabe, M. Hasnat Kabir, Masato Makino, Hidemitsu Furukawa, Koichi Nishitsuka

    Multiple Authorship (Including Foreigners)

  • Structural analysis of shape memory gel, Advanced Materials Research, 922 248-253, 2014

    M. Hasnat Kabir, Masato Makino, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • In situ observation of a hydrogel-glass interface during sliding friction, SOFT MATTER, 10(30) 5589-5596, 2014

    Tetsurou Yamamoto, Takayuki Kurokawa, Jamil Ahmed, Gen Kamita, Shintaro Yashima, Yuichiro Furukawa, Yuko Ota, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Thermal-mechanical icn-smg gels for smart devices, ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2014, 1 V001T03A034, 2014

    Jin Gong, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • THERMAL-MECHANICAL ICN-SMG GELS FOR SMART DEVICES, PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, 2014, VOL 1, 2014

    Jin Gong, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D Scanning of Internal Structure in Gel Engineering Materials with Visual Scanning Microscopic Light Scattering, NANOSENSORS, BIOSENSORS, AND INFO-TECH SENSORS AND SYSTEMS 2014, 9060 0120491-0120494, 2014

    Yosuke Watanabe, Jin Gong, Makino Masato, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D printing of soft and wet systems benefit from hard-to-soft transition of transparent shape memory gels (Presentation Video), NANOSENSORS, BIOSENSORS, AND INFO-TECH SENSORS AND SYSTEMS 2014, 9060 , 2014

    Hidemitsu Furukawa, Jin Gong, Masato Makino, Md Hasnat Kabir

    Multiple Authorship (Including Foreigners)

  • High Transparent Shape Memory Gel, ELECTROACTIVE POLYMER ACTUATORS AND DEVICES (EAPAD) 2014, 9056 , 2014

    Jin Gong, Masanori Arai, M. Hasnat Kabir, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Frictional properties of high functional gel materials, BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2014, 9058 , 2014

    Masato Wada, Kohei Yamada, Naoya Yamada, Masato Makino, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Frictional Properties of Gel Engineering Materials with Laser Surface Texturing, BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2014, 9058 , 2014

    Naoya Yamada, Jin Gong, M. Hasnat Kabir, Masato Makino, Keisuke Maekawa, Masato Wada, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 3D Scanning of Internal Structure in Gel Engineering Materials with Visual Scanning Microscopic Light Scattering, NANOSENSORS, BIOSENSORS, AND INFO-TECH SENSORS AND SYSTEMS 2014, 9060 , 2014

    Yosuke Watanabe, Jin Gong, Makino Masato, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of a standard method to observe the surface friction of high-strength gels, BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2014, 9058 , 2014

    Kohei Yamada, Yosuke Watanabe, Naoya Yamada, Masato Wada, Jin Gong, Masato Makino, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • 顕微FTIR‐ATR法によるDNゲル摩擦界面のその場観察(第2報)重水を用いた水膜成分の観察, 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM), 2014 ROMBUNNO.2014AKI,B17, 2014

    星靖, 滝渡幸治, 七尾英孝, 和田真人, 古川英光, 森誠之

    Multiple Authorship (Including Foreigners)

  • イオン液体ダブルネットワークゲルの合成とその低摩擦特性, 繊維学会予稿集, 69(1 (CD-ROM)) ROMBUNNO.2D07, 2014

    三浦美紀, 森永隆志, 上條利夫, 荒船博之, 本間彩夏, 佐藤貴哉, 古川英光, GONG Jin, 和田真人

    Multiple Authorship (Including Foreigners)

  • 機能性ゲルの摩擦挙動, 日本トライボロジー学会トライボロジー会議予稿集(CD-ROM), 2014 ROMBUNNO.2014AKI,B10, 2014

    和田真人, 古川英光

    Multiple Authorship (Including Foreigners)

  • Structural analysis of Shape memory gels, THERMEC'2013, 2013.12

    M. Hasnat Kabir, Yosuke Watanabe, Jin Gong, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Gel Robotics: 3-D Printable Smart Systems Benefit From Hard-to-Soft Transition of Transparent Tough Shape Memory Gels, THERMEC’2013, 2013.12

    H Furukawa, S Harada, Y Amano, J Gong, M Makino, M H Kabir

    Multiple Authorship (Including Foreigners)

  • Experiment of a Variable Stiffness Robot Using Shape Memory Gel, Proceeidng of 2013 IEEE/SICE International Symposium on System Integration, 2013.12

    Mitsuhiro Yamada, Daisuke Goto, Kenji Ujiie, Naoki Akiba, Jin Gong, Hidemitsu Furukawa, Riichirou Tadakuma

    Multiple Authorship (Including Foreigners)

  • Structural analysis of Shape memory gels, THERMEC'2013, 2013.12

    M. Hasnat Kabir, Yosuke Watanabe, Jin Gong, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Gel Robotics: 3-D Printable Smart Systems Benefit From Hard-to-Soft Transition of Transparent Tough Shape Memory Gels, THERMEC’2013, 2013.12

    H Furukawa, S Harada, Y Amano, J Gong, M Makino, M H Kabir

    Multiple Authorship (Including Foreigners)

  • Effects of the extensional rate on two-dimensional turbulence of semi-dilute polymer solution flows, RHEOLOGICA ACTA, 52(10-12) 949-961, 2013.11

    Ruri Hidema, Hiroshi Suzuki, Shion Hisamatsu, Yoshiyuki Komoda, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Hard-to-soft transition of transparent shape memory gels and the first observation of their critical temperature studied with scanning microscopic light scattering, MATERIALS LETTERS, 108 239-242, 2013.10

    M. Hasnat Kabir, Jin Gong, Yosuke Watanabe, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Friction characteristic by the temperature change of the gels, Proceedings of the 12th Asia Pacific Physics Conference (APPC12), JPS Conf. Proc. 1.012042, 2013.07

    Masato Wada, Jin Gong, Masato Makino, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Imaging of Internal Structure in Gel Engineering Materials with Visual Scanning Microscopic Light Scattering, Proceedings of the 12th Asia Pacific Physics Conference (APPC12), JPS Conf. Proc. 1.012049, 2013.07

    Yosuke Watanabe, Jin Gong, Masato Makino, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Gel Engineering Materials Meso-Decorated with Polymorphic Crystals, Advanced Materials Research, 746 325-329, 2013.06

    Jin Gong, Susumu Igarashi, Kensuke Sawamura, Masato Makino,M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Hard-to-soft transition of transparent shape memory gels and the first observation of their critical temperature studied with scanning microscopic light scattering, Materials Letters, 108 239-242, 2013.06

    M. Hasnat Kabir, Jin Gong, Yosuke Watanabe, Masato Makino, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of A Novel Standard Type of Gel Engineering Materials via Simple Bulk Polymerization, J. Solid Mech. Mater. Eng., Vol. 7(No. 3) 455-465, 2013.05

    Jin Gong, Yosuke Watanabe, Yusuke Watanabe, Ruri Hidema, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Supramolecular Assemblies of a Semirigid Polyanion in Aqueous Solutions, MACROMOLECULES, 46(9) 3581-3586, 2013.05

    Zi Liang Wu, Md. Arifuzzaman, Takayuki Kurokawa, Khoa Le, Jian Hu, Tao Lin Sun, Hidemitsu Furukawa, Hiroyasu Masunaga, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Suprarmolecular Assemblies of a Semirigid Polyanion in Aqueous Solutions, Macromolecules, 46(9) 3581-3586, 2013.04

    Zi Liang Wu, Md. Arifuzzaman, Takayuki Kurokawa, Khoa Le, Jian Hu, Tao Lin Sun, Hidemitsu Furukawa, Hiroyasu Masunaga, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • GEM printer: 3D gel printer for free shaping of functional gel engineering materials, SPIE Proceedings , 8687 86872W-1-86872W-4, 2013.04

    Hidemitsu Furukawa, Hisato Muroi, Kouki Yamamoto, Ryo Serizawa, Jin Gong

    Multiple Authorship (Including Foreigners)

  • Nanoscale imaging of mesh size distribution in gel engineering materials with visual scanning microscopic light scattering, SPIE Proceedings, 8691 86911C-1-86911C-6, 2013.04

    Yosuke Watanabe, M Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Observation instrument of dynamic friction interface of gel engineering materials with polarized optical microscopic, SPIE Proceedings, 8689 86890I-1-86890I-7, 2013.04

    Naoya Yamada, Masato Wada, M. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Silver nanowires embedded gel electrodes, SPIE Proceedings, 8687 86872B-1-86872B-3, 2013.04

    Yuta Abe, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Characterization of shape memory gels using scanning microscopic light scattering, SPIE Proceedings, 8691 86911D-1-86911D-7, 2013.04

    M. Hasnat Kabir, Yosuke Watanabe, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Meso-decorated self-healing gels: network structure and properties, SPIE Proceedings, 8689 86890H-1-86890H-5, 2013.04

    Jin Gong, Kensuke sawamura, Susumu Igarashi, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of a Novel Standard Type of Gel Engineering Materials via Simple Bulk Polymerization, J. Solid Mech. Mater. Eng., 7(3) 455-462, 2013.03

    Jin GONG, Yosuke WATANABE, Yusuke WATANABE, Ruri HIDEMA, Muhammad Hasnat KABIR, Hidemitsu FURUKAWA

    Multiple Authorship (Including Foreigners)

  • Structural Analysis and Mechanical Properties of Dry-Synthesis Gels, J. Solid Mech. Mater. Eng., 7(2) 224-227, 2013.03

    Yosuke Watanabe, Keisuke Maekawa, Ruri Hidema, M. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Smart Hydrogels Developed With Inter-Crosslinking Network (ICN) Structure, J. Solid Mech. Mater. Eng.,, 7(2) 245-250, 2013.03

    Hidemitsu Furukawa, Jin Gong, Yoshitaka Amano, Go Takada, Ruri Hidema

    Multiple Authorship (Including Foreigners)

  • Development of Optical 3D Gel Printer for Fabricating Free-Form Soft & Wet Industrial Materials and Evaluation of Printed Double-Network Gels, J. Solid Mech. Mater. Eng., 7(2) 163-168, 2013.03

    Hisato Muroi, Ruri Hidema, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • GEM Printer: 3D gel printer for free shaping of functional gel engineering materials, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2013.03

    Hidemitsu Furukawa, Muroi Hisato, Kouki Yamamoto, Ryo Serizawa, Jin Gong

    Multiple Authorship (Including Foreigners)

  • Development of Optical 3D Gel Printer for Fabricating Free-Form Soft & Wet Industrial Materials and Evaluation of Printed Double-Network Gels, J. Solid Mech. Mater. Eng., 7(2) 163-168, 2013.03

    Hisato Muroi, Ruri Hidema, Jin Gong, Hidemitsr Furukawa

    Multiple Authorship (Including Foreigners)

  • Surface and Bulk Mechanical Properties Of Soft And Wet Materials, J. Solid Mech. Mater. Eng., 7(2) 228-234, 2013.03

    Masato Wada, Ruri Hidema, Takuma Chiba, Kohei Yamada, Naoya Yamada, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Structural Analysis and Mechanical Properties of Dry-Synthesis Gels, J. Solid Mech. Mater. Eng., 7(2) 224-227, 2013.03

    Yosuke Watanabe, Keisuke Maekawa, Ruri Hidema, M. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Relaxation modes in chemically cross-linked poly(2-methacryloyloxyethyl phosphorylcholine) hydrogels, Soft Matter, 9(7) 2166-2171, 2013.02

    Tatsuro Goda, Hidemitsu Furukawa, Jian Ping Gong, Kazuhiko Ishihara

    Multiple Authorship (Including Foreigners)

  • Photoinduced deformation of rigid azobenzene-containing polymer networks, Macromolecules, 46(3) 1017-1026, 2013.02

    Nobuhiko Hosono, Mayumi Yoshikawa, Hidemitsu Furukawa, Kenro Totani, Kyoko Yamada, Toshiyuki Watanabe, Kazuyuki Horie

    Multiple Authorship (Including Foreigners)

  • Smart Hydrogels Developed With Inter-Crosslinking Network (ICN) Structure, J. Solid Mech. Mater. Eng., 7(2) 245-250, 2013.02

    Hidemitsu Furukawa, Jin Gong, Yoshitaka Amano, Go Takada, Ruri Hidema

    Multiple Authorship (Including Foreigners)

  • Photoinduced Deformation of Rigid Azobenzene-Containing Polymer Networks, Macromolecules, 46(3) 1017-1026, 2013.01

    Nobuhiko Hosono, Mayumi Yoshikawa, Hidemitsu Furukawa, Kenro Totani, Kyoko Yamada, Toshiyuki Watanabe, Kazuyuki Horie

    Multiple Authorship (Including Foreigners)

  • Relaxation modes in chemically cross-linked poly (2-methacryloyloxyethyl phosphorylcholine) hydrogels, Soft Matter, 9 2166-2171, 2013.01

    Tatsuro Goda, Hidemitsu Furukawa, Jian Ping Gong, Kazuhiko Ishihara

    Multiple Authorship (Including Foreigners)

  • Relaxation modes in chemically cross-linked poly(2-methacryloyloxyethyl phosphorylcholine) hydrogels., Soft Matter, 9(7) 2166-2171, 2013.01

    Tatsuro Goda, Hidemitsu Furukawa, Jian Ping Gong, Kazuhiko Ishihara

    Multiple Authorship (Including Foreigners)

  • Joule-heat control of shape-memory gels with conductivity, Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 79(800) 512-516, 2013

    Koki Yamamoto, Ruri Hidema, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Nanoscale Imaging of Mesh Size Distribution in Gel Engineering Materials with Visual Scanning Microscopic Light Scattering, NANOSENSORS, BIOSENSORS, AND INFO-TECH SENSORS AND SYSTEMS 2013, 8691 86890I-1-86890I -7, 2013

    Yosuke Watanabe, M. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Observation instrument of dynamic friction interface of gel engineering materials with polarized optical microscopic, BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2013, 8689 86872B-1-86872B-3, 2013

    Naoya Yamada, Masato Wada, M. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Silver nanowires embedded gel electrodes, Proceedings of SPIE - The International Society for Optical Engineering, 8687 86872B-1-86872B-3, 2013

    Yuta Abe, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Characterization of shape memory gels using scanning microscopic light scattering, Proceedings of SPIE - The International Society for Optical Engineering, 8691 86911D-1-86911D-7, 2013

    M. Hasnat Kabir, Yosuke Watanabe, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Meso-decorated self-healing gels: network structure and properties, BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2013, 8689 86890H-1-86890H-5, 2013

    Jin Gong, Kensuke Sawamura, Susumu Igarashi, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Gel engineering Materials meso-decorated with polymorphic crystals, Advanced Materials Research, 746 325-329, 2013

    Jin Gong, Susumu Igarashi, Kensuke Sawamura, Masato Makino, M. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Extensional Viscosity of Semi-Dilute Polymer Solution Effect on Two-Dimensional Turbulence, International Journal of Transport Phenomena, 13(3) 183-191, 2013

    Ruri HIDEMA, Hiroshi SUZUKI, Yoshiyuki KOMODA, Hidemitsu FURUKAWA

    Multiple Authorship (Including Foreigners)

  • Development of extensional viscosity measurement method on low viscos polymer solution with an abrupt contraction flow, Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 79(803) 1264-1268, 2013

    Ruri Hidema, Hiroshi Suzuki, Shingo Harada, Takahito Shiraki, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Hierarchical Structure in Gels Studied with Scanning Microscopic Light Scattering, Proceedings of Symposium on Network Polymer, 34(5) 286-293, 2013

    WADA Masato, FULUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • 808 Tribological Properties of Functional Gels, The Proceedings of the Materials and processing conference, 2013(0) _808-1_-_808-4_, 2013

    YAMADA Katsuya, YAMADA Naoya, YAMADA Kouhei, WADA Masato, GONG Jin, MAKINO Masato, KABIR Md. Hasnat, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • 808 Tribological Properties of Functional Gels, The Proceedings of the Materials and processing conference, 2013(0) _808-1_-_808-4_, 2013

    YAMADA Katsuya, YAMADA Naoya, YAMADA Kouhei, WADA Masato, GONG Jin, MAKINO Masato, KABIR Md. Hasnat, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • J044032 Temperature Dependence of Surface Friction of Shape Memory Gels, The Proceedings of Mechanical Engineering Congress, Japan, 2013(0) _J044032-1-_J044032-5, 2013

    WADA Masato, GONG Jin, MAKINO Masato, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • J044031 Development of a Novel Method to Observe the Surface Friction of Gel Engineering Materials : Toward the electric-field Control of the Surface Friction of Gels, The Proceedings of Mechanical Engineering Congress, Japan, 2013(0) _J044031-1-_J044031-5, 2013

    YAMADA Kohei, GONG Jin, WATANABE Yosuke, YAMADA Naova, WADA Masato, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Experiments of a two-arm robot using shape memory gel, IEEE Xplore, System Integration (SII), IEEE/SICE International Symposium on, 2012.12

    Mitsuhiro Yamano, Naoki Akiba, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Meso-Decorated Gels: Synthesis and Properties, The 9th SPSJ International Polymer Conference (IPC 2012), 2012.12

    Jin Gong, Kensuke Sawamura, Susumu Igarashi, Md. Hasnat Kabir, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Frictional Phenomenon between Planner Hydrogel and Spherical Glass, The 9th SPSJ International Polymer Conference (IPC 2012), 2012.12

    Jin Gong, Masato Wada, Naoya Yamada, Kouhei Yamada, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Mechanical Characterization of Polymer Gels with Scanning Microscopic Light Scattering, The 9th SPSJ International Polymer Conference (IPC 2012), 2012.12

    Md. Hasnat Kabir, Yusuke Watanabe, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Mechanical properties of endlinking polymer gels having rigidity, The 9th SPSJ International Polymer Conference (IPC 2012), 2012.12

    Shoichiro Yamaura, Toshiyuki Watanabe, Hidemitsu Furukawa, Naofumi Naga

    Multiple Authorship (Including Foreigners)

  • 3D Gel Printer for Free Shaping of Functional Gel Materials, The 9th SPSJ International Polymer Conference (IPC 2012), 2012.12

    Hidemitsu Furukawa, Hisato Muroi, Kouki Yamamoto, Ryo Serizawa, Jin Gong

    Multiple Authorship (Including Foreigners)

  • Nematic growth of microtubules that changed into giant spiral structure through partial depolymerization and subsequent dynamic ordering, Soft Matter, 8 , 2012.11

    Kiyotaka Shigehara, Hiroki Kudoh, Saori Mori, Yoshiki Tamura, Akira Kakugo, Ryuzo Kawamura, Hidemitsu Furukawa, Jian Ping Gong, Hiroyasu Masunaga, Tomomi Masui, Satoshi Koizumif, Kazuhiro Shikinaka

    Multiple Authorship (Including Foreigners)

  • Single Image Turbulence Analysis for Drag Reduction Affected by Flexibility of Polymers, 2012 AIChE ANNUAL MEETING, 8pages, 2012.11

    Ruri HIDEMA, Hiroshi SUZUKI, Yoshiyuki KOMODA, Hidemitsu FURUKAWA

    Multiple Authorship (Including Foreigners)

  • Intelligent Button Developed Using Smart Soft and Wet Materials, CHEMISTRY LETTERS, 41(10) 1047-1049, 2012.10

    Sho Harada, Ruri Hidema, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Creation of Shape-memory Gels with Inter-crosslinking Network Structure, CHEMISTRY LETTERS, 41(10) 1029-1031, 2012.10

    Yoshitaka Amano, Ruri Hidema, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Smart Hydrogels Developed With InterCrosslinking Network (ICN) Structure, The 3rd Asian Symposium on Materials & Processing (ASMP2012), 2012.08

    Hidemitsu Furukawa, Jin Gong, Yoshitaka Amano, Go Takada, Ruri Hidema

    Multiple Authorship (Including Foreigners)

  • Structural Analysis And Mechanical Properties Of Dry-Synthesis Gels, The 3rd Asian Symposium on Materials & Processing (ASMP2012), 2012.08

    Maekawa, Jin Go Keisuke ng, Yusuke Watanabe, Yosuke Watanabe, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Optical 3D Printing Of Soft And Wet Industrial Materials, The 3rd Asian Symposium on Materials & Processing (ASMP2012), 2012.08

    Hisato Muroi, Jin Gong, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Surface And Bulk Mechanical Properties Of Soft And Wet Materials, The 3rd Asian Symposium on Materials & Processing (ASMP2012), 2012.08

    Masato Wada, Jin Gong, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Creating Standards For Soft And Wet Industrial Materials, The 3rd Asian Symposium on Materials & Processing (ASMP2012), 2012.08

    Jin Gong, Yusuke Watanabe, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Study of Simply Prepared Standard Gel Materials for Industry, Proceeding of the 3rd Asian Symposium on Materials and Processing (ASMP2012), SMSFM5 , 2012.08

    Jin Gong, Yusuke Watanabe, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Optical 3D Printing Of Soft And Wet Industrial Materials, 3rd Asian Symposium on Materials and Processing, 2012.08

    Hisato MUROI, Jin GONG, Ruri HIDEMA, Hidemitsu FURUKAWA

    Multiple Authorship (Including Foreigners)

  • Creating Standards For Soft And Wet Industrial Materials, 3rd Asian Symposium on Materials and Processing, 2012.08

    Jin GONG, Yusuke WATANABE, Ruri HIDEMA, Hidemitsu FURUKAWA

    Multiple Authorship (Including Foreigners)

  • Ultrahigh Ductile Gels Having Inter-Crosslinking Network (ICN) Structure, e-J. Surf. Sci. Nanotech. , 10 346-350, 2012.07

    Go Takada, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of Film Interference Flow Imaging Method (FIFI) Studying Polymer Stretching Effects on Thin Liquid Layer, e-J. Surf. Sci. Nanotech. , 10 335-340, 2012.07

    Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Swelling and elasticity of gels with inter-crosslinking network structure, International Conference on Advanced Dynamics and Model Based Control of Structures and Machines(ABC2012), 2012.07

    Hidemitsu Furukawa, Ruri Hidema, Go Takada, Yoshitata Amano

    Multiple Authorship (Including Foreigners)

  • Flow control by polymers studied with film interference flow imaging, International Conference on Advanced Dynamics and Model Based Control of Structures and Machines(ABC2012), 2012.07

    Ruri Hidema, Naoya Yamada, Shingo Harada, Hiroshi Suzuki, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Smart Lenses Developed with High-Strength and Shape Memory Gels, e-J. Surf. Sci. Nanotech. , 10 243-247, 2012.06

    Tomohiro Yokoo, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Intelligent Button Developed with Smart Soft and Wet Materials, IACIS 2012 International Association of Colloid and Interface Scientists, Conference, 2012.05

    S. Harada, R. Hidema, J. Gong, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Creation of Shape-memory Gels with Inter-crosslinking Network Structure, IACIS 2012 International Association of Colloid and Interface Scientists, Conference, 2012.05

    Y. Amano, R. Hidema, J. Gong, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Inter-crosslinking network gels having both shape memory and high ductility, SPIE Proceedings, (8341) , 2012.04

    Yoshitaka Amano, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Novel Shape Memory Gels for Soft Polymeric Actuator -Mechanism and Applications-, PI-SMART(Progress and Innovation of SMART) in Hirosaki 2012, 2012.04

    Jin Gong, Ruri Hidema, Sho Harada, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Novel Shape Memory Gels for Soft Polymeric Actuator -Mechanism and Applications-, PI-SMART(Progress and Innovation of SMART) in Hirosaki 2012, 2012.04

    Jin GONG, Ruri HIDEMA, Sho HARADA, Hidemitsu FURUKAWA

    Multiple Authorship (Including Foreigners)

  • Surface and Bulk Mechanical Properties Of Soft And Wet Materials, J. Solid Mech. Mater. Eng., 7(2) 228-234, 2012.03

    Masato Wada, Ruri Hidema, Takuma Chiba, Kohei Yamada, Naoya Yamada, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Photo-responsible gel actuator developed with scanning microscopic light scattering, Active and Passive Smart Structures and Integrated Systems 2012, 2012.03

    Hidemitsu Furukawa, Ruri Hidema, Mayumi Yoshikawa, Kyoko Yamada, Toshiyuki Watanabe, Kazuyuki Horie

    Multiple Authorship (Including Foreigners)

  • Soft and wet actuator developed with responsible high-strength gels, SPIE 8341, Active and Passive Smart Structures and Integrated Systems 2012, 2012.03

    S. Harada, R. Hidema, H Furukawa

    Multiple Authorship (Including Foreigners)

  • An inter-crosslinking network gels that has both shape memory and high ductility, SPIE 8341, Active and Passive Smart Structures and Integrated Systems 2012, 2012.03

    Y. Amano, R. Hidema, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Diagnosis at a glance of biological non- Newtonian fluids with Film Interference Flow Imaging (FIFI), Smart Sensor Phenomena, Technology, Networks, and Systems Integration 2012, 2012.03

    R. Hidema, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Surfactant-induced friction reduction for hydrogels in the boundary lubrication regime, J. Phys.: Condens. Matter 23, 23 , 2012.03

    Kosuke Kamada, Hidemitsu Furukawa, Takayuki Kurokawa, Tomohiro Tada, Taiki Tominaga, Yukihiro Nakano, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Ultrahigh Ductile Gels Developed by Inter Cross-linking Network (ICN), J. Solid Mech. Mater. Eng., 6(2) 169-177, 2012.02

    Go Takada, Ruri Hidema, Hidemitsu Furukawa

    Single Author

  • Fiber reinforced gels with high strength, Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 78(791) 1120-1124, 2012

    Go Takada, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Nematic growth of microtubules that changed into giant spiral structure through partial depolymerization and subsequent dynamic ordering, SOFT MATTER, 8(45) 11544-11551, 2012

    Kiyotaka Shigehara, Hiroki Kudoh, Saori Mori, Yoshiki Tamura, Akira Kakugo, Ryuzo Kawamura, Hidemitsu Furukawa, Jian Ping Gong, Hiroyasu Masunaga, Tomomi Masui, Satoshi Koizumi, Kazuhiro Shikinaka

    Multiple Authorship (Including Foreigners)

  • Diagnosis at a glance of biological non-Newtonian fluids with Film Interference Flow Imaging (FIFI), SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS INTEGRATION 2012, 8346 1-83461, 2012

    R. Hidema, N. Yamada, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Photo-responsible gel actuator developed with scanning microscopic light scattering, ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2012, 8341 1-83411, 2012

    Hidemitsu Furukawa, Mayumi Yoshikawa, Kyoko Yamada, Toshiyuki Watanabe, Ruri Hidema, Kazuyuki Horie

    Multiple Authorship (Including Foreigners)

  • Soft and wet actuator developed with responsible high-strength gels, ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2012, 8341 1-83412, 2012

    S. Harada, R. Hidema, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Experiments of a Two-arm Robot Using Shape Memory Gel, 2012 IEEE/SICE INTERNATIONAL SYMPOSIUM ON SYSTEM INTEGRATION (SII), 236-241, 2012

    Mitsuhiro Yamano, Naoki Akiba, Jin Gong, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Ultrahigh ductile gels having inter-crosslinking network (ICN) structure, e-Journal of Surface Science and Nanotechnology, 10 346-350, 2012

    Go Takada, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of film interference flow imaging method (FIFI) studying polymer stretching effects on thin liquid layer, e-Journal of Surface Science and Nanotechnology, 10 335-340, 2012

    Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Inter-crosslinking network gels having both shape memory and high ductility, ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2012, 8341 83412B-1-83412B-7, 2012

    Yoshitaka Amano, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Low Frictional Behavior of Gel Engineering Materials, Abstract of annual meeting of the Surface Science of Japan, 32(0) 232, 2012

    Furukawa Hidemitsu, Wada Masato, Gong Jin

    Multiple Authorship (Including Foreigners)

  • 108 Friction Characteristic and the Stick-Slip Phenomenon of Gel Engineering Materials, The Proceedings of the Materials and processing conference, 2012(0) _108-1_-_108-5_, 2012

    WADA Masato, GONG Jin, Chiba Takuma, YAMADA Kohei, YAMADA Naoya, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • 107 Polarized Optical Microscopic Observation of Dynamic Frictional Interface of Gel Engineering Materials, The Proceedings of the Materials and processing conference, 2012(0) _107-1_-_107-3_, 2012

    YAMADA Naoya, GONG Jin, WADA Masato, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • 106 Electric-field Control of Surface Friction of Gel Engineering Materials, The Proceedings of the Materials and processing conference, 2012(0) _106-1_-_106-5_, 2012

    YAMADA Kohei, GONG Jin, YAMADA Naoya, WADA Masato, FURUKAWA Hidemitsu

    Multiple Authorship (Including Foreigners)

  • Development of Film Interference Flow Imaging Method (FIFI) Studying Polymer Stretching Effects on Thin Liquid Layer, International Symposium on Surface Science -Towards Nano- ,Bio-, and Green Innovation- (ISSS-6), 2011.12

    R. Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Smart Lenses Developed with High-Strength and Shape Memory Gels, International Symposium on Surface Science -Towards Nano- ,Bio-, and Green Innovation- (ISSS-6), 2011.12

    T. Yokoo, R. Hidema, H. Furukawa,

    Multiple Authorship (Including Foreigners)

  • Ultrahigh Ductile Gels Having Inter Crosslinking Network (ICN) Structure, International Symposium on Surface Science -Towards Nano- ,Bio-, and Green Innovation- (ISSS-6), 2011.12

    G. Takada, R. Hidema, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Polymer Effects on Turbulence in Flowing Soap Films Studied with Film Interference Flow Imaging Method, J. Solid Mech. Mater. Eng., 5(12) 838-848, 2011.12

    Ruri Hidema, Hidemitsu Furukawa, Hideharu Ushiki

    Multiple Authorship (Including Foreigners)

  • Novel Optical Devices Developed with High-Strength Gels, J. Solid Mech. Mater. Eng., 5(12) 1015-1021, 2011.11

    Tomohiro Yokoo, Ruri Hidema, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Education Project for Innovation, Executed in Faculty of Engineering at Yamagata University in 2010 - Two Education Programs about Biomass and Snow Vehicle -, 2nd Asian Conference on Engineering Education (ACEE2011), 2011.10

    Hidemitsu Furukawa, Kazuo Watanabe, Hiroyuki Konno, Yuta Matsushima, Go Matsuba, Kohei Nomoto

    Multiple Authorship (Including Foreigners)

  • Learn-by-Doing Approach to Convert Students' Learning Attitude from Passive to Active in Department of Systems Innovation at Yamagata University, 2nd Asian Conference on Engineering Education (ACEE2011), 2011.10

    Yasuo Kondo, Hiroshi Iizuka, Tsutomu Shimura, Naoki Kodama, Takao Aiyama, Hidemitsu Furukawa, Toshiyuki Amano, Shigeru Kubota

    Multiple Authorship (Including Foreigners)

  • I Love ECO . Production of Eco-friendly Building Materials and An Eco-conscious Miniature House from Biomass, 2nd Asian Conference on Engineering Education (ACEE2011), 2011.10

    Narumi Kumamoto, Jun Shimizu, Masanari Minamisawa, Hidemitsu Furukawa, Kazuo Watanabe, Hiroyuki Konno

    Multiple Authorship (Including Foreigners)

  • レーザー走査照射による高強度ゲルの3 次元光造形, 日本機械学会論文集A編, 077(778) , 2011.07

    日出間るり, 杉田恵一, 古川英光

    Multiple Authorship (Including Foreigners)

  • Surfactant-induced friction reduction for hydrogels in the boundary lubrication regime, JOURNAL OF PHYSICS-CONDENSED MATTER, 23(28) 284107, 2011.07

    Kosuke Kamada, Hidemitsu Furukawa, Takayuki Kurokawa, Tomohiro Tada, Taiki Tominaga, Yukihiro Nakano, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Surfactant-induced friction reduction for hydrogels in the boundary lubrication regime, JOURNAL OF PHYSICS-CONDENSED MATTER, 23(28) 284107, 2011.07

    Kosuke Kamada, Hidemitsu Furukawa, Takayuki Kurokawa, Tomohiro Tada, Taiki Tominaga, Yukihiro Nakano, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Effect of Void Structure on the Toughness of Double Network Hydrogels, Journal of Polymer Science Part B: Polymer Physics, 2011.06

    74) Tasuku Nakajima, Hidemitsu Furukawa, Yoshimi Tanaka, Takayuki Kurokawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Polymer Effects on Turbulence in Flowing Soap Films Studied with Film Interference Flow Imaging Method, ASME Conf. Proc, 2011.06

    R. Hidema, H. Furukawa, H. Ushiki

    Multiple Authorship (Including Foreigners)

  • Fast and Slow relaxation Modes in Shrunken phase of thermoreponsible N-isopropylacrilamide Gels Studied with Scanning Microscopic Light Scattering (SMILS), ASME Conf. Proc, 2011.06

    H. Furukawa, R. Hidema, K. Horie, S. Hirotsu

    Multiple Authorship (Including Foreigners)

  • Novel Optical Devices Developed with High-Strength Gels, ASME Conf. Proc, 2011.06

    T. Yokoo, R. Hidema, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Development of Ultrahigh Ductile Gels, ASME Conf. Proc., 2011.06

    G. Takada, R. Hidema, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • レーザー走査照射による高強度ゲルの3 次元光造形, 日本機械学会論文集(A編), 77 1002-1006, 2011.06

    日出間るり, 杉田恵一, 古川英光

    Multiple Authorship (Including Foreigners)

  • 形状記憶ゲルの繊維強化による自己修復材料の創製, 日本機械学会論文集(A編), 77 764-768, 2011.05

    日出間るり, 吉沢泰介, Khairi Bin NASARUDDIN, 古川英光

    Multiple Authorship (Including Foreigners)

  • Strain-Induced Molecular Reorientation and Birefringence Reversion of a Robust, Anisotropic Double-Network Hydrogel, MACROMOLECULES, 44(9) 3542-3547, 2011.05

    Zi Liang Wu, Daisuke Sawada, Takayuki Kurokawa, Akira Kakugo, Wei Yang, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Anisotropic Hydrogel from Complexation-Driven Reorientation of Semirigid Polyanion at Ca2+ Diffusion Flux Front, MACROMOLECULES, 44(9) 3535-3541, 2011.05

    Zi Liang Wu, Takayuki Kurokawa, Daisuke Sawada, Jian Hu, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Strain-Induced Molecular Reorientation and Birefringence Reversion of a Robust, Anisotropic Double-Network Hydrogel, MACROMOLECULES, 44(9) 3542-3547, 2011.05

    Zi Liang Wu, Daisuke Sawada, Takayuki Kurokawa, Akira Kakugo, Wei Yang, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Strain-Induced Molecular Reorientation and Birefringence Reversion of a Robust, Anisotropic Double-Network Hydroge, Macromolecules, 2011.03

    72) Zi Liang Wu, Daisuke Sawada, Takayuki Kurokawa, Akira Kakugo, Wei Yang, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Anisotropic Hydrogel from Complexation-Driven Reorientation of Semirigid Polyanion at Ca2+ Diffusion Flux Front, Macromolecules, 2011.03

    73) Zi Liang Wu, Takayuki Kurokawa, Daisuke Sawada, Jian Hu, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Robust bonding and one-step facile synthesis of tough hydrogels with desirable shape by virtue of the double network structure, POLYMER CHEMISTRY, 2(3) 575-580, 2011.03

    Junji Saito, Hidemitsu Furukawa, Takayuki Kurokawa, Rikimaru Kuwabara, Shinya Kuroda, Jian Hu, Yoshimi Tanaka, Jian Ping Gong, Nobuto Kitamura, Kazunori Yasuda

    Multiple Authorship (Including Foreigners)

  • Robust bonding and one-step facile synthesis of tough hydrogels with desirable shape by virtue of the double network structure, POLYMER CHEMISTRY, 2(3) 575-580, 2011.03

    Junji Saito, Hidemitsu Furukawa, Takayuki Kurokawa, Rikimaru Kuwabara, Shinya Kuroda, Jian Hu, Yoshimi Tanaka, Jian Ping Gong, Nobuto Kitamura, Kazunori Yasuda

    Multiple Authorship (Including Foreigners)

  • Robust bonding and one-step facile synthesis of tough hydrogels with desirable shape by virtue of the double network structure, Polymer Chemistry, 2(3) 575-580, 2011.03

    Junji Saito, Hidemitsu Furukawa, Takayuki Kurokawa, Rikimaru Kuwabara, Shinya Kuroda, Jian Hu, Yoshimi Tanaka, Jian Ping Gong, Nobuto Kitamura, Kazunori Yasuda

    Multiple Authorship (Including Foreigners)

  • Hydrogel with Cubic-Packed Giant Concentric Domains of Semi-Rigid Polyion Complex, Soft Matter,, 7(5) 1884-1889, 2011.01

    70) Zi Liang Wu, Md. Arifuzzaman, Takayuki Kurokawa, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Hydrogel with cubic-packed giant concentric domains of semi-rigid polyion complex, SOFT MATTER, 7(5) 1884-1889, 2011

    Zi Liang Wu, Md Arifuzzaman, Takayuki Kurokawa, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Hydrogel with cubic-packed giant concentric domains of semi-rigid polyion complex, SOFT MATTER, 7(5) 1884-1889, 2011

    Zi Liang Wu, Md Arifuzzaman, Takayuki Kurokawa, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Robust bonding and one-step facile synthesis of tough hydrogels with desirable shape by virtue of the double network structure, Polym.Chem, 2, 575 -585 , 2010.11

    69) Junji Saito, Hidemitsu Furukawa, Takayuki Kurokawa, Rikimaru Kuwabara, Shinya Kuroda, Jian Hu, Yoshimi Tanaka, Jian Ping Gong, Nobuto Kitamurae, Kazunori Yasuda

    Multiple Authorship (Including Foreigners)

  • Water-Induced Brittle-Ductile Transition of Double Network Hydrogels, MACROMOLECULES, 43(22) 9495-9500, 2010.11

    Hiroko Itagaki, Takayuki Kurokawa, Hidemitsu Furukawa, Tasuku Nakajima, Yukiteru Katsumoto, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Synthesis and optical properties of organic-inorganic hybrid gels containing fluorescent molecules, POLYMER, 51(22) 5095-5099, 2010.10

    Naofumi Naga, Tomoharu Miyanaga, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Water-Induced Brittle-Ductile Transition of Double Network Hydrogels, Macromolecules, 43 9495-9500, 2010.09

    Hiroko Itagaki, Takayuki Kurokawa, Hidemitsu Furukawa, Tasuku Nakajima, Yukiteru Katsumoto, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Synthesis and optical properties of organic-inorganic hybrid gels containing fluorescent molecules, Polymer, (51) 5095-5099, 2010.09

    N. Naga, T. Miyanaga, H.Furukawa

    Multiple Authorship (Including Foreigners)

  • Preparation of Enzymatically Recyclable Hydrogels Through the Formation of Inclusion Complexes of Amylose in a Vine-Twining Polymerization, Chemistry – An Asian Journal, 5(7) 1627-1633, 2010.07

    Y. Kaneko ,K. Fujisaki, T. Kyutoku, H. Furukawa , J. Kadokawa

    Multiple Authorship (Including Foreigners)

  • Hydrogels with Cylindrically Symmetric Structure at Macroscopic Scale by Self-Assembly of Semi-rigid Polyion Complex, JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 132(29) 10064-10069, 2010.07

    Zi Liang Wu, Takayuki Kurokawa, Songmiao Liang, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • A facile method for synthesizing free-shaped and tough double network hydrogels using physically crosslinked poly(vinyl alcohol) as an internal mold, POLYMER CHEMISTRY, 1(5) 693-697, 2010.07

    Tasuku Nakajima, Naoyuki Takedomi, Takayuki Kurokawa, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Hydrogels with Cylindrically Symmetric Structure at Macroscopic Scale by Self-Assembly of Semi-rigid Polyion Complex, JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 132(29) 10064-10069, 2010.07

    Zi Liang Wu, Takayuki Kurokawa, Songmiao Liang, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Hydrogel with Cylindrically Symmetric Structure at Macroscopic Scale by Self-Assembly of Semi-Rigid Polyion Complex, J. Am. Chem. Soc., 132 (29 ) 10064 -10069 , 2010.06

    68) Zi Liang Wu, Takayuki Kurokawa, Songmiao Liang, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Formation of a strong hydrogel-porous solid interface via the double-network principle, ACTA BIOMATERIALIA, 6(4) 1353-1359, 2010.04

    Takayuki Kurokawa, Hidemitsu Furukawa, Wei Wang, Yoshimi Tanaka, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Ligament-like tough double-network hydrogel based on bacterial cellulose, CELLULOSE, 17(1) 93-101, 2010.02

    Yui Hagiwara, Ananda Putra, Akira Kakugo, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Robust bonding and one-step facile synthesis of tough hydrogels with desirable shape by virtue of the double network structure, Polym.Chem, 2010.01

    Junji Saito, Hidemitsu Furukawa, Takayuki Kurokawa, Rikimaru Kuwabara, Shinya Kuroda, Jian Hu, Yoshimi Tanaka, Jian Ping Gong, Nobuto Kitamurae, Kazunori Yasuda

    Multiple Authorship (Including Foreigners)

  • Ligament-like tough double-network hydrogel based on bacterial cellulose, Cellulose, 17 93-101, 2010.01

    Yui Hagiwara, Ananda Putra, Akira Kakugo, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Preparation of Enzymatically Recyclable Hydrogels Through the Formation of Inclusion Complexes of Amylose in a Vine-Twining Polymerization, CHEMISTRY-AN ASIAN JOURNAL, 5(7) 1627-1633, 2010

    Yoshiro Kaneko, Kazuya Fujisaki, Tsuyoshi Kyutoku, Hidemitsu Furukawa, Jun-ichi Kadokawa

    Multiple Authorship (Including Foreigners)

  • A Deformation Mechanism for Double-Network Hydrogels with Enhanced Toughness, POLYMER NETWORKS: SYNTHESIS, PROPERTIES, THEORY AND APPLICATIONS, 291-292 122-+, 2010

    Tasuku Nakajima, Hidemitsu Furukawa, Jian Ping Gong, Eric K. Lin, Wen-li Wu

    Multiple Authorship (Including Foreigners)

  • Preparation of Enzymatically Recyclable Hydrogels Through the Formation of Inclusion Complexes of Amylose in a Vine-Twining Polymerization, CHEMISTRY-AN ASIAN JOURNAL, 5(7) 1627-1633, 2010

    Yoshiro Kaneko, Kazuya Fujisaki, Tsuyoshi Kyutoku, Hidemitsu Furukawa, Jun-ichi Kadokawa

    Multiple Authorship (Including Foreigners)

  • Formation of Well-Oriented Microtubules with Preferential Polarity in a Confined Space under a Temperature Gradient, JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 131(50) 18089-18095, 2009.12

    Akira Kakugo, Yoshiki Tamura, Kazuhiro Shikinaka, Momoko Yoshida, Ryuzo Kawamura, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Formation of Well-Oriented Microtubules with Preferential Polarity in a Confined Space under a Temperature Gradient, JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 131(50) 18089-18095, 2009.12

    Akira Kakugo, Yoshiki Tamura, Kazuhiro Shikinaka, Momoko Yoshida, Ryuzo Kawamura, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Formation of Well-Oriented Microtubules with Preferential Polarity in a Confined Space under a Temperature Gradient, JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 131(50) 18089-18095, 2009.12

    Akira Kakugo, Yoshiki Tamura, Kazuhiro Shikinaka, Momoko Yoshida, Ryuzo Kawamura, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Formation of Well-Oriented Microtubules with Preferential Polarity in a Confined Space under a Temperature Gradient, JACS, 131 18089-18095, 2009.11

    Akira Kakugo, Yoshiki Tamura, Kazuhiro Shikinaka, Momoko Yoshida, Ryuzo Kawamura,| Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • 海洋中でのフジツボに対するゲルの付着阻害効果とそのメカニズム, 高分子学会予稿集(CD-ROM), 58(2 Disk1) ROMBUNNO.3L2-14, 2009.09

    室崎喬之, 野口隆矢, 角五彰, 黒川孝幸, 古川英光, GONG Jiang Pin, 長田義仁, 野方靖行, 松村清隆, 伏谷伸宏

    Multiple Authorship (Including Foreigners)

  • First Observation of Stick-Slip Instability in Tearing of Poly(vinyl alcohol) Gel Sheets, MACROMOLECULES, 42(15) 5425-5426, 2009.08

    Yoshimi Tanaka, Hiroyuki Abe, Takayuki Kurokawa, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • 超高強度ゲルの創製―小角中性子散乱によるDouble Networkゲルの構造解析―, 繊維学会予稿集, 64(1) 364, 2009.06

    富永大輝, 古川英光, GONG Jian Pink, 長田義仁, TIRUMALA Vijay R, LIN Eric K, WU Wen‐li

    Multiple Authorship (Including Foreigners)

  • Direct Observation of Damage Zone around Crack Tips in Double-Network Gels, MACROMOLECULES, 42(12) 3852-3855, 2009.06

    Qiu Ming Yu, Yoshimi Tanaka, Hidemitsu Furukawa, Takayuki Kurokawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Synthesis of Organic−Inorganic Hybrid Gels from Siloxane or Silsesquioxane and α,ω-Nonconjugated Dienes by Means of a Photo Hydrosilylation Reaction, Macromolecules, 42(10) 3454-3462, 2009.05

    N. Naga, Y. Kihara, T. Miyanaga, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Photoinduced in situ formation of various F-actin assemblies with a photoresponsive polycation, JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 89A(2) 424-431, 2009.05

    Manami Misu, Hidemitsu Furukawa, Hyuck-Joon Kwon, Kazuhiro Shikinaka, Akira Kakugo, Toshifumi Satoh, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Synthesis of Organic−Inorganic Hybrid Gels from Siloxane or Silsesquioxane and α,ω-Nonconjugated Dienes by Means of a Photo Hydrosilylation Reaction, Macromolecules, 42(10) 3454-3462, 2009.05

    N. Naga, Y. Kihara, T. Miyanaga, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Photoinduced in situ formation of various F-actin assemblies with a photoresponsive polycation, JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 89A(2) 424-431, 2009.05

    Manami Misu, Hidemitsu Furukawa, Hyuck-Joon Kwon, Kazuhiro Shikinaka, Akira Kakugo, Toshifumi Satoh, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • True Chemical Structure of Double Network Hydrogels, MACROMOLECULES, 42(6) 2184-2189, 2009.03

    Tasuku Nakajima, Hidemitsu Furukawa, Yoshimi Tanaka, Takayuki Kurokawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • 摩擦界面の直接観察によるゲルの摩擦メカニズムの解明, 高分子学会北海道支部研究発表会講演要旨集, 43rd 20, 2009.02

    太田優子, 古川英光, 武富直之, 富永大輝, 黒川孝幸, きょう剣萍

    Multiple Authorship (Including Foreigners)

  • 蛍光プローブ法によるゲルの摩擦低減メカニズムの解明, 高分子学会北海道支部研究発表会講演要旨集, 43rd 52, 2009.02

    高橋淳, 古川雄一郎, 鎌田晃輔, 富永大輝, 古川英光, きょう剣萍

    Multiple Authorship (Including Foreigners)

  • Photoinduced in situ Formation of Various F-Actin Assemblies with Photoresponsive Polycation, J. Biomed. Mater. Res.: Part A, 89A(2) 424-431, 2009.01

    M. Misu, H. Furukawa, H.-J. Kwon, K. Shikinaka, A. Kakugo, T. Sato, Y. Osada, .J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Brittle, ductile, paste-like behaviors and distinct necking of double network gels with enhanced heterogeneity, Journal of Physics: Conference Series, 184(012016) 8, 2009.01

    Y. Kawauchi, Y. Tanaka, H. Furukawa, T. Kurokawa, T. Nakajima1, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Orientated Bacterial Cellulose Culture Controlled by Liquid Substrate of Silicone Oil with Different Viscosity and Thickness, Polym. J., 41(9) 764-770, 2009.01

    Ananda Putra, Akira Kakugo, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Nonvolatile and Shape-Memorized Bacterial Cellulose Gels Swollen by Poly(ethylene glycol), Polymer J., 41(7) 524-525, 2009.01

    Y. Numata, K. Muromoto, H. Furukawa, J. P. Gong, K. Tajima, M. Munekata

    Multiple Authorship (Including Foreigners)

  • First observation of stick-slip instability in tearing of poly(vinyl alcohol) gel sheets, Macromolecules (Communication to the Editor), 42(15) 5425-5426, 2009.01

    Y. Tanaka, H. Abe, T. Kurokawa, H. Furukawa, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Direct Observation of Damage Zone around Crack Tips in Double-Network Gels, Macromolecules (Communication to the Editor), 42(12) 3852-3855, 2009.01

    Q. M. Yu, Y. Tanaka, H. Furukawa, T. Kurokawa, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Synthesis of Organic−Inorganic Hybrid Gels from Siloxane or Silsesquioxane and α,ω-Nonconjugated Dienes by Means of a Photo Hydrosilylation Reaction, Macromolecules, 42(10) 3454-3462, 2009.01

    N. Naga, Y. Kihara, T. Miyanaga, H. Furukawa,

    Multiple Authorship (Including Foreigners)

  • Antifouling activity of synthetic polymer gels against cyprids of the barnacle (Balanus amphitrite) in vitro, Biofouling,, 25(4) 313-320, 2009.01

    T. Murosaki, T. Noguchi, A. Kakugo, A. Putra, T. Kurokawa, H. Furukawa, Y. Osada, J. P. Gong, Y. Nogata, K. Matsumura, E. Yoshimura, N. Fusetani

    Multiple Authorship (Including Foreigners)

  • Mesoscopic Network Structure of a Semi-Rigid Polyion Complex Nested in a Polycationic Hydrogel, Advanced Materials, 21 1-5, 2009.01

    Z. L. Wu, H. Furukawa, W. Yang, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • True Chemical Structure of Double Network Hydrogels, Macromolecules, 42(6) 2184-2189, 2009.01

    T. Nakajima, H. Furukawa, Y. Tanaka, T. Kurokawa, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Synthesis of Novel Double Network Hydrogels via Atomic Transfer Radical Polymerization (ATRP), Composite Interfaces, 16 433-436, 2009.01

    X.-F. Ni, A. Putra, H. Furukawa, J. P. Gong,

    Multiple Authorship (Including Foreigners)

  • SUPER TOUGH GELS WITH A DOUBLE NETWORK STRUCTURE, CHINESE JOURNAL OF POLYMER SCIENCE, 27(1) 1-9, 2009.01

    Tasuku Nakajima, Takayuki Kurokawa, Hidemitsu Furukawa, Qiu Ming Yu, Yoshimi Tanaka, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Antifouling activity of synthetic polymer gels against cyprids of the barnacle (Balanus amphitrite) in vitro, BIOFOULING, 25(4) 313-320, 2009

    T. Murosaki, T. Noguchi, A. Kakugo, A. Putra, T. Kurokawa, H. Furukawa, Y. Osada, J. P. Gong, Y. Nogata, K. Matsumura, E. Yoshimura, N. Fusetani

    Multiple Authorship (Including Foreigners)

  • Antifouling properties of tough gels against barnacles in a long-term marine environment experiment, BIOFOULING, 25(7) 657-666, 2009

    T. Murosaki, T. Noguchi, K. Hashimoto, A. Kakugo, T. Kurokawa, J. Saito, Y. M. Chen, H. Furukawa, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Brittle, ductile, paste-like behaviors and distinct necking of double network gels with enhanced heterogeneity, Journal of Physics: Conference Series, 184(012016) 8, 2009

    Yasunori Kawauchi, Yoshimi Tanaka, Hidemitsu Furukawa, Takayuki Kurokawa, Tasuku Nakajima, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Synthesis of Novel Double Network Hydrogels via Atom Transfer Radical Polymerization, COMPOSITE INTERFACES, 16(4-6) 433-446, 2009

    Xufeng Ni, Ananda Putra, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Antifouling activity of synthetic polymer gels against cyprids of the barnacle (Balanus amphitrite) in vitro, BIOFOULING, 25(4) 313-320, 2009

    T. Murosaki, T. Noguchi, A. Kakugo, A. Putra, T. Kurokawa, H. Furukawa, Y. Osada, J. P. Gong, Y. Nogata, K. Matsumura, E. Yoshimura, N. Fusetani

    Multiple Authorship (Including Foreigners)

  • Nonvolatile and Shape-Memorized Bacterial Cellulose Gels Swollen by Poly(ethylene glycol), POLYMER JOURNAL, 41(7) 524-525, 2009

    Yukari Numata, Kazumi Muromoto, Hidemitsu Furukawa, Jian Ping Gong, Kenji Tajima, Masanobu Munekata

    Multiple Authorship (Including Foreigners)

  • Orientated Bacterial Cellulose Culture Controlled by Liquid Substrate of Silicone Oil with Different Viscosity and Thickness, POLYMER JOURNAL, 41(9) 764-770, 2009

    Ananda Putra, Akira Kakugo, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Highly Extensible Double-Network Gels with Self-Assembling Anisotropic Structure, ADVANCED MATERIALS, 20(23) 4499-4503, 2008.12

    Wei Yang, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Highly Extensible Double-Network Gels with Self-Assembling Anisotropic Structure, ADVANCED MATERIALS, 20(23) 4499-4503, 2008.12

    Wei Yang, Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Tear Velocity Dependence of High-Strength Double Network Gels in Comparison with Fast and Slow Relaxation Modes Observed by Scanning Microscopic Light Scattering, MACROMOLECULES, 41(19) 7173-7178, 2008.10

    Hidemitsu Furukawa, Rikimaru Kuwabara, Yoshimi Tanaka, Takayuki Kurokawa, Yang-Ho Na, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Morphogenesis of Liposomes Caused by Polycation-Induced Actin Assembly Formation, LANGMUIR, 24(20) 11975-11981, 2008.10

    Haruka Maemichi, Kazuhiro Shikinaka, Akira Kakugo, Hidemitsu Furukawa, Yoshihito Osada, Han Ping Gong

    Multiple Authorship (Including Foreigners)

  • Morphogenesis of Liposomes Caused by Polycation-Induced Actin Assembly Formation, LANGMUIR, 24(20) 11975-11981, 2008.10

    Haruka Maemichi, Kazuhiro Shikinaka, Akira Kakugo, Hidemitsu Furukawa, Yoshihito Osada, Han Ping Gong

    Multiple Authorship (Including Foreigners)

  • Tear Velocity Dependence of High-Strength Double Network Gels in Comparison with Fast and Slow Relaxation Modes Observed by Scanning Microscopic Light Scattering, MACROMOLECULES, 41(19) 7173-7178, 2008.10

    Hidemitsu Furukawa, Rikimaru Kuwabara, Yoshimi Tanaka, Takayuki Kurokawa, Yang-Ho Na, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦‐摩擦界面の直接観察による基盤の親・疎水性効果の解明, 高分子学会予稿集(CD-ROM), 57(2 Disk1) 2I02, 2008.09

    太田優子, 古川英光, 武富直之, 富永大輝, 黒川孝幸, GONG Jian Ping

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦におけるHAの潤滑効果 II~関節並みの高荷重において~, 高分子学会予稿集(CD-ROM), 57(2 Disk1) 3J01, 2008.09

    中野征洋, 富永大輝, 黒川孝幸, 古川英光, GONG Jian Ping

    Multiple Authorship (Including Foreigners)

  • Localized yielding around crack tips of double-network gels(a), MACROMOLECULAR RAPID COMMUNICATIONS, 29(18) 1514-1520, 2008.09

    Yoshimi Tanaka, Yasunori Kawauchi, Takayuki Kurokawa, Hidemitsu Furukawa, Takaharu Okajima, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • 動体追跡によるゲル上でのフジツボキプリス幼生の探索行動解析, Sess Org, 25(2) 95-96, 2008.08

    室崎喬之, 野口隆矢, 角五彰, 古川英光, きょう剣萍, 長田義仁, 野方靖行, 松村清隆, 伏谷伸宏

    Multiple Authorship (Including Foreigners)

  • Structural anisotropy of silica hydrogels prepared under magnetic field, MATERIALS LETTERS, 62(19) 3459-3461, 2008.07

    Atsushi Mori, Takamasa Kaito, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Shrinking Behavior of Surfactant-Grafted Thermosensitive Gels and the Mechanism of Rapid Shrinking, Macromol. Rapid Comm., 29(11) 897-903, 2008.06

    K. Okeyoshi, T. Abe, Y. Noguchi, H. Furukawa, R. Yoshida

    Multiple Authorship (Including Foreigners)

  • Structural Anisotropy of Silica Hydrogels prepared under Magnetic Field, Mater. Lett., 62(19) 3459-3461, 2008.06

    A. Mori, T. Kaito, H. Furukawa,

    Multiple Authorship (Including Foreigners)

  • Shrinking behavior of surfactant-grafted thermosensitive gels and the mechanism of rapid shrinking, MACROMOLECULAR RAPID COMMUNICATIONS, 29(11) 897-903, 2008.06

    Kosuke Okeyoshi, Tetsuya Abe, Yuji Noguchi, Hidemitsu Furukawa, Ryo Yoshida

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦‐ゲル‐ガラス摩擦界面のin‐situ観察(2), 高分子学会予稿集(CD-ROM), 57(1 Disk1) 3PC071, 2008.05

    古川雄一郎, 古川英光, 富永大輝, 武富直之, GONG Jian Ping

    Multiple Authorship (Including Foreigners)

  • Light-controlled on-off switch of a fluorescent nanoparticle, MACROMOLECULAR RAPID COMMUNICATIONS, 29(7) 547-551, 2008.04

    Hidemitsu Furukawa, Manami Misu, Kazuhiro Ando, Haruma Kawaguchi

    Multiple Authorship (Including Foreigners)

  • Light-controlled on-off switch of a fluorescent nanoparticle, MACROMOLECULAR RAPID COMMUNICATIONS, 29(7) 547-551, 2008.04

    Hidemitsu Furukawa, Manami Misu, Kazuhiro Ando, Haruma Kawaguchi

    Multiple Authorship (Including Foreigners)

  • Self-assembling structure in solution of a semirigid polyelectrolyte, MACROMOLECULES, 41(5) 1791-1799, 2008.03

    Wei Yang, Hidemitsu Furukawa, Yukari Shigekura, Kazuhiro Shikinaka, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Observation of the three-dimensional structure of actin bundles formed with polycations, BIOMACROMOLECULES, 9(2) 537-542, 2008.02

    Kazuhiro Shikinaka, Hyuckjoon Kwon, Akira Kakugo, Hidemitsu Furukawa, Yoshihito Sada, Jian Ping Gong, Yoshitaka Aoyama, Hideo Nishioka, Hiroshi Jinnai, Takaharu Okajima

    Multiple Authorship (Including Foreigners)

  • Observation of the three-dimensional structure of actin bundles formed with polycations, BIOMACROMOLECULES, 9(2) 537-542, 2008.02

    Kazuhiro Shikinaka, Hyuckjoon Kwon, Akira Kakugo, Hidemitsu Furukawa, Yoshihito Sada, Jian Ping Gong, Yoshitaka Aoyama, Hideo Nishioka, Hiroshi Jinnai, Takaharu Okajima

    Multiple Authorship (Including Foreigners)

  • 蛍光プローブ法によるゲルの表面摩擦の解明, 高分子ゲル研究討論会講演要旨集, 19th 57-58, 2008.01

    高橋淳, 古川雄一郎, 鎌田晃輔, 富永大輝, 古川英光, GONG Jian Ping

    Multiple Authorship (Including Foreigners)

  • Observation of the Three-Dimensional Structure of Actin Bundles Formed with Polycations, Biomacromolecules, 9(2) 537-542, 2008.01

    K. Shikinaka, H. Kwon, A. Kakugo, H. Furukawa, Y. Osada, J. P. Gong, Y. Aoyama, H. Nishioka, H. Jinnai, T. Okajima

    Multiple Authorship (Including Foreigners)

  • Structure Analysis of Jungle-gym-type gels by Brownian Dynamics Simulation, AIP Conf. Proc. (IWCS2007), 982 517-520, 2008.01

    N. Ohta, K. Ono, M. Takasu, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Morphogenesis of Liposomes Caused by Polycation-Induced Actin Assembly Formation, Langmuir, 24(20) 11975-11981, 2008.01

    H. Maemichi, K. Shikinaka, A. Kakugo, H. Furukawa, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Flower Petal-like Pattern on Soft Hydrogels during Vodka Spreading, Prog. Colloid and Polym. Sci., 135 225-230, 2008.01

    D. Kaneko, H. Furukawa, Y. Tanaka, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Tear Velocity Dependence of High-Strength Double Network Gels in Comparison with Fast and Slow Relaxation Modes Observed by Scanning Microscopic Light Scattering, Macromolecules, 41(19) 7173-7178, 2008.01

    H. Furukawa, R. Kuwabara, Y. Tanaka, T. Kurokawa, Y.-H. Na, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • High extensible double-network gels with self-assembling anisotropic structure, Advanced Materials,, 20(23) 4499-4503, 2008.01

    W. Yang, H. Furukawa, J. P. Gong,

    Multiple Authorship (Including Foreigners)

  • Localized Yielding around Crack Tips of Double-network Gels, Macromol. Rapid Commun., 29 1514-1520, 2008.01

    Y. Tanaka, Y. Kawauchi, T. Kurokawa, H. Furukawa, T. Okajima, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Friction of a soft hydrogel on rough solid substrates, Soft Matter, 4(8) , 2008.01

    T. Tominaga, T. Kurokawa, H. Furukawa, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Effect of substrate adhesion and hydrophobicity on hydrogel friction, Soft Matter, 4(5) 1033-1040, 2008.01

    T. Tominaga, N. Takedomi, H. Biederman, H. Furukawa, Y. Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Tubular Bacterial Cellulose Gel with Oriented Fibrils on the Curved Surface, Polymer, 49(7) 1885-1891, 2008.01

    A. Putra, A. Kakugo, H. Furukawa, J. P. Gong, Y. Osada, T. Uemura, M. Yamamoto

    Multiple Authorship (Including Foreigners)

  • Self-Assembling Structure in Solution of a Semirigid Polyelectrolyte, Macromolecules, 41(5) 1791-1799, 2008.01

    W. Yang, H. Furukawa, Y. Shigekura, K. Shikinaka, Y. Osada, J. P. Gong,

    Multiple Authorship (Including Foreigners)

  • Light-Controlled On-off Switch of a Fluorescent Nanoparticle, Macromol. Rapid Commun, 29(7) 547-551, 2008.01

    H. Furukawa, M. Misu, K. Ando, H. Kawaguchi

    Multiple Authorship (Including Foreigners)

  • Production of Bacterial Cellulose with Well Oriented Fibril on PDMS Substrate, Polymer J, 40(2) 137-142, 2008.01

    A. Putra, A. Kakugo, H. Furukawa, J. P. Gong, Y. Osada, T. Uemura, M. Yamamoto

    Multiple Authorship (Including Foreigners)

  • Structure Analysis of Jungle-gym-type gels by Brownian Dynamics Simulation, AIP Conf. Proc. (IWCS2007), 982 517-520, 2008.01

    N. Ohta, K. Ono, M. Takasu, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Integration of Biomolecular Motors: Toward an ATP Fueled Soft Moving System, Polymer Preprints, Japan, 57 106, 2008

    Kazuhiro Shikinaka, Ryuzo Kawamura, Akira Kakugo, Hidemitsu Furukawa, Jian Ping Gong, Yoshihito Osada

    Multiple Authorship (Including Foreigners)

  • Production of bacterial cellulose with well oriented fibril on PDMS substrate, POLYMER JOURNAL, 40(2) 137-142, 2008

    Ananda Putra, Akira Kakugo, Hidentitsu Furukawa, Jian P. Gong, Yoshihito Osada, Tetsuya Uemura, Masafumi Yamamoto

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦におけるHAの潤滑効果 II~関節並みの高荷重において~, レオロジー討論会講演要旨集, 56th 330-331, 2008

    中野征洋, 富永大輝, 黒川孝幸, 古川英光, GONG Jian Ping

    Multiple Authorship (Including Foreigners)

  • Structure analysis of jungle-gym-type gels by Brownian dynamics simulation, COMPLEX SYSTEMS-BOOK 1, 982 517-+, 2008

    Noriyoshi Ohta, Kohki Ono, Masako Takasu, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Production of bacterial cellulose with well oriented fibril on PDMS substrate, POLYMER JOURNAL, 40(2) 137-142, 2008

    Ananda Putra, Akira Kakugo, Hidentitsu Furukawa, Jian P. Gong, Yoshihito Osada, Tetsuya Uemura, Masafumi Yamamoto

    Multiple Authorship (Including Foreigners)

  • Effect of substrate adhesion and hydrophobicity on hydrogel friction, SOFT MATTER, 4(5) 1033-1040, 2008

    Taiki Tominaga, Naoyuki Takedomi, Hynek Biederman, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Friction of a soft hydrogel on rough solid substrates, SOFT MATTER, 4(8) 1645-1652, 2008

    Taiki Tominaga, Takayuki Kurokawa, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Flower Petal-like Pattern on Soft Hydrogels during Vodka Spreading, COLLOIDS FOR NANO- AND BIOTECHNOLOGY, 135 225-+, 2008

    Daisaku Kaneko, Hidemitsu Furukawa, Yoshirni Tanaka, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Structure analysis of jungle-gym-type gels by Brownian dynamics simulation, COMPLEX SYSTEMS-BOOK 1, 982 517-+, 2008

    Noriyoshi Ohta, Kohki Ono, Masako Takasu, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Tough hydrogel - Learn from nature, CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Artificial Muscle Actuators using Electroactive Polymers, 61 40-45, 2008

    Hidemitsu Furukawa, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • The molecular origin of enhanced toughness in double-network hydrogels: A neutron scattering study, POLYMER, 48(26) 7449-7454, 2007.12

    Taiki Tominaga, Vijay R. Tirumala, Eric K. Lin, Jian Ping Gong, Hidemitsu Furukawa, Yoshihito Osada, Wen-li Wu

    Multiple Authorship (Including Foreigners)

  • Mesh Size Control of Organic-Inorganic Hybrid Gels by Means of a Hydrosilylation Co-gelation of Siloxane or Silsesquioxane andα, ω-Nonconjugated Dienes, Macromol. Chem. Phys, 208(21) 2331-2338, 2007.11

    N. Naga, E. Oda, A. Toyota, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • A molecular dynamics simulation study on polymer networks of end-linked flexible or rigid chains., The Journal of chemical physics, 127(16) 164905, 2007.10

    Nobuhiko Hosono, Yuichi Masubuchi, Hidemitsu Furukawa, Toshiyuki Watanabe

    Multiple Authorship (Including Foreigners)

  • A molecular dynamics simulation study on polymer networks of end-linked flexible or rigid chains, JOURNAL OF CHEMICAL PHYSICS, 127(16) 164905, 2007.10

    Nobuhiko Hosono, Yuichi Masubuchi, Hidemitsu Furukawa, Toshiyuki Watanabe

    Multiple Authorship (Including Foreigners)

  • 高分子ゲル上におけるフジツボの着生挙動―動体追跡によるフジツボ幼生の探索行動解析―, 高分子学会予稿集(CD-ROM), 56(2 Disk1) 1T17, 2007.09

    室崎喬之, 野口隆矢, 角五彰, 古川英光, GONG Jian Ping, 長田義仁, 野方靖行, 松村清隆, 伏谷伸宏

    Multiple Authorship (Including Foreigners)

  • Importance of entanglement between first and second components in high-strength double network gels, MACROMOLECULES, 40(18) 6658-6664, 2007.09

    Mei Huang, Hidemitsu Furukawa, Yoshimi Tanaka, Tasuku Nakajima, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • 高分子ゲル上におけるタテジマフジツボキプリス幼生の着生挙動, Sess Org, 24(2) 162-163, 2007.08

    室崎喬之, 野口隆矢, 角五彰, 古川英光, きょう剣萍, 長田義仁, 野方靖行, 松村清隆, 伏谷伸宏

    Multiple Authorship (Including Foreigners)

  • Temperature-induced changes in the surface wettability of SBR plus PNIPA films, MACROMOLECULAR MATERIALS AND ENGINEERING, 292(8) 917-922, 2007.08

    Noriko Mori, Haruna Horikawa, Hidernitsu Furukawa, Toshiyuki Watanabe

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦におけるヒアルロン酸の潤滑効果, 日本バイオレオロジー学会年会プログラム・抄録集, 30th 39, 2007.06

    中野征洋, 杜すい, 富永大輝, 黒川孝幸, 古川英光, GONG J.P, 長田義仁

    Multiple Authorship (Including Foreigners)

  • Friction of soft gel in dilute polymer solution, MACROMOLECULES, 40(12) 4313-4321, 2007.06

    Miao Du, Yasuyuki Maki, Taiki Tominaga, Hidemitsu Furukawa, Jian Ping Gong, Yoshihito Osada, Qiang Zheng

    Multiple Authorship (Including Foreigners)

  • ゲル上へのフジツボの着生(2)―ゲルの着生阻害効果―, 高分子学会予稿集(CD-ROM), 56(1 Disk1) 1M17, 2007.05

    室崎喬之, 野口隆矢, 角五彰, 古川英光, GONG Jian Ping, 長田義仁, 野方靖行, 松村清隆, 伏谷伸宏

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦[30]流体潤滑膜形成メカニズム, 高分子学会予稿集(CD-ROM), 56(1 Disk1) 1PH092, 2007.05

    武富直之, 富永大輝, 黒川孝幸, DU Miao, 古川英光, GONG Jian Ping, 長田義仁

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦[31]ヒアルロン酸の潤滑効果, 高分子学会予稿集(CD-ROM), 56(1 Disk1) 1PG093, 2007.05

    中野征洋, DU Miao, 富永大輝, 黒川孝幸, 古川英光, GONG Jian Ping, 長田義仁

    Multiple Authorship (Including Foreigners)

  • ゲル上へのフジツボの着生(1)―実験系の構築と着生実験―, 高分子学会予稿集(CD-ROM), 56(1 Disk1) 1M16, 2007.05

    野口隆矢, 室崎喬之, 角五彰, 古川英光, GONG Jian Ping, 長田義仁, 野方靖行, 松村清隆, 伏谷伸宏

    Multiple Authorship (Including Foreigners)

  • Actin network formation by unidirectional polycation diffusion, LANGMUIR, 23(11) 6257-6262, 2007.05

    Hyuck Joon Kwon, Akira Kakugo, Takehiro Ura, Takaharu Okajima, Yoshimi Tanaka, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Actin network formation by unidirectional polycation diffusion, LANGMUIR, 23(11) 6257-6262, 2007.05

    Hyuck Joon Kwon, Akira Kakugo, Takehiro Ura, Takaharu Okajima, Yoshimi Tanaka, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Photochemical control of network structure in gels and photo-induced changes in their viscoelastic properties, COLLOIDS AND SURFACES B-BIOINTERFACES, 56(1-2) 285-289, 2007.04

    Nobuhiko Hosono, Hidemitsu Furukawa, Yuichi Masubuchi, Toshiyuki Watanabe, Kazuyuki Horie

    Multiple Authorship (Including Foreigners)

  • Anisotropic gelation seeded by a rod-like polyelectrolyte, MACROMOLECULES, 40(7) 2477-2485, 2007.04

    Yukari Shigekura, Hidemitsu Furukawa, Wei Yang, Yong Mei Chen, Tatsuo Kaneko, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Photochemical control of network structure in gels and photo-induced changes in their viscoelastic properties, COLLOIDS AND SURFACES B-BIOINTERFACES, 56(1-2) 285-289, 2007.04

    Nobuhiko Hosono, Hidemitsu Furukawa, Yuichi Masubuchi, Toshiyuki Watanabe, Kazuyuki Horie

    Multiple Authorship (Including Foreigners)

  • Motility and structural polymorphism of polymer-actin complex gel, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 7(3) 844-847, 2007.03

    Hyuck Joon Kwon, Kazuhiro Shikinaka, Akira Kakugo, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Motility and structural polymorphism of polymer-actin complex gel, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 7(3) 844-847, 2007.03

    Hyuck Joon Kwon, Kazuhiro Shikinaka, Akira Kakugo, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • 20pPSA-43 Gel-gel Adhesion by Double Network Structure, Meeting abstracts of the Physical Society of Japan, 62(1) , 2007.02

    Saito J, Furukawa H, Tanaka Y, Kuwabara R, Kurokawa T, Gong J.P, Osada Y

    Multiple Authorship (Including Foreigners)

  • 20aRE-7 High-Strength Soft & Wet Matter (3) : Entanglement Effect in Double-Network Gels, Meeting abstracts of the Physical Society of Japan, 62(1) , 2007.02

    Furukawa Hidemitsu, Huang Mei, Nakajima Tasuku, Tanaka Yoshimi, Kurokawa Takayuki, Gong Jian Ping, Osada Yoshihito

    Multiple Authorship (Including Foreigners)

  • 20pPSA-44 Soft & Wet Matter With Ultra Toughness (2) : Necking Phenomenon in DN gels, Meeting abstracts of the Physical Society of Japan, 62(1) , 2007.02

    Kawauchi Yasunori, Tanaka Yoshimi, Furukawa Hidemitsu, Okajima Takaharu, Na Yang-Ho, Kurokawa Takayuki, Gong Jian Ping, Osada Yoshihito

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦における潤滑層形成メカニズム, 高分子学会北海道支部研究発表会講演要旨集, 41st 25, 2007.02

    武富直之, 富永大輝, 黒川孝幸, 杜びょう, 古川英光, きょう剣萍, 長田義仁

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦におけるヒアルロン酸の潤滑効果, 高分子学会北海道支部研究発表会講演要旨集, 41st 34, 2007.02

    中野征洋, 杜びょう, 富永大輝, 古川英光, きょう剣萍, 長田義仁

    Multiple Authorship (Including Foreigners)

  • エバネッセント波動的光散乱測定系の構築とゲルの表面摩擦研究への応用, 高分子学会北海道支部研究発表会講演要旨集, 41st 35, 2007.02

    古川雄一郎, 富永大輝, 武富直之, 古川英光, きょう剣萍, 長田義仁

    Multiple Authorship (Including Foreigners)

  • Superior Nanoporous Polyimides via Supercritical CO2 Drying of Jungle-gym Type Polyimide Gels, Macromol. Rapid Commun., 28 96-100, 2007.01

    K. Kawagishi, H. Saito, H. Furukawa, K. Horie

    Multiple Authorship (Including Foreigners)

  • The molecular origin of enhanced toughness in double-network hydrogels: A neutron scattering study, Polymer, 48(26) 7449-7454, 2007.01

    T. Tominaga, V. R. Tirumala, E. K. Lin, J. P. Gong, H. Furukawa, Y. Osada, W. L. Wu

    Multiple Authorship (Including Foreigners)

  • A molecular dynamics simulation study on polymer networks of end-linked flexible or rigid chains, J. Chem. Phys., 127(164905) 1-9, 2007.01

    N. Hosono, Y. Masubuchi, H. Furukawa, T. Watanabe

    Multiple Authorship (Including Foreigners)

  • Temperature-Induced Changes in the Surface Wettability of SBR+PNIPA Film, Macromol. Mater. Engineer., 292 917-922, 2007.01

    N. Mori, H. Horikawa, H. Furukawa, T. Watanabe

    Multiple Authorship (Including Foreigners)

  • Mesh Size Control of Organic-Inorganic Hybrid Gels by Means of a Hydrosilylation Co-gelation of Siloxane or Silsesquioxane andα, ω-Nonconjugated Dienes, Macromol. Chem. Phys, 208(21) 2331-2338, 2007.01

    N. Naga, E. Oda, A. Toyota, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Friction of Soft Gel in Dilute Polymer Solution, Macromolecules, 40(12) 4313-4321, 2007.01

    M. Du, Y. Maki, T. Tominaga, H. Furukawa, J. P. Gong, Y. Osada, Q. Zheng

    Multiple Authorship (Including Foreigners)

  • Photochemical control of network structure in gels and photo-induced changes in their viscoelastic properties, Coll. Surf. B: Biointerfaces, 56 285-259, 2007.01

    N. Hosono, H. Furukawa, Y. Masubuchi, T. Watanabe, K. Horie

    Multiple Authorship (Including Foreigners)

  • Actin network formation by uni-directional polycation diffusion, Langmuir,, 23(11) 6257-6262, 2007.01

    H. J. Kwon, A. Kakugo, T. Ura, T. Okajima, Y. Tanaka; H. Furukawa, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Importance of Entanglement between First and Second Components in High-Strength Double Network Gels, Macromolecules, 40 6658-6664, 2007.01

    M. Huang, H. Furukawa, Y. Tanaka, T. Nakajima, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Anisotropic Gelation Seeded by a Rod-Like Polyelectrolyte, Macromolecules, 40 2477-2485, 2007.01

    Y. Shigekura, H. Furukawa, W. Yang, Y. M. Chen, T. Kaneko, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Motility and Structural Polymorphism of Polymer-Actin Complex Gel, J. Nanosci. Nanotechnol., 7 844-847, 2007.01

    H. J. Kwon, K. Shikinaka, A. Kakugo, H. Furukawa, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Growth and Morphology of Polymer-Actin Complexes, Chinese J. Polym. Sci., 25 47-55, 2007.01

    H. J. Kwon, K. Shikinaka, A. Kakugo, H. Furukawa, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Growth and morphology of polymer-actin complexes, CHINESE JOURNAL OF POLYMER SCIENCE, 25(1) 47-55, 2007.01

    Hyuck Joon Kwon, Kazuhiro Shikinaka, Akira Kakugo, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Superior nanoporous polyimides via supercritical CO2 drying of jungle-gym-type polyimide gels, MACROMOLECULAR RAPID COMMUNICATIONS, 28(1) 96-100, 2007.01

    Ken Kawagishi, Hirornu Saito, Hidernitsu Furukawa, Kazuyuki Horie

    Multiple Authorship (Including Foreigners)

  • Anisotropic polyion-complex gels via template polymerization, Polymer Preprints, Japan, 55 1754, 2006.10

    Yukari Shigekura, Hidemitsu Furukawa, Yongmei Chen, Yongmei Chen, Tatsuo Kaneko, Wei Yang, Jian Ping Gong, Jian Ping Gong, Yoshihito Osada

    Multiple Authorship (Including Foreigners)

  • End-crosslinking gelation of poly(amide acid) gels studied with scanning microscopic light scattering, HIGH PERFORMANCE POLYMERS, 18(5) 837-847, 2006.10

    Hidemitsu Furukawa, Mizuha Kobayashi, Yoshiharu Miyashita, Kazuyuki Horie

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦[28]―ゲルの摩擦に及ぼす界面活性剤の効果―, 高分子学会予稿集(CD-ROM), 55(2 Disk1) 2PA061, 2006.09

    鎌田晃輔, 富永大輝, 黒川孝幸, 多田朋弘, 古川英光, GONG Jian Ping, 長田義仁

    Multiple Authorship (Including Foreigners)

  • Anisotropic nucleation growth of actin bundle: A model for determining the well-defined thickness of bundles, BIOCHEMISTRY, 45(34) 10313-10318, 2006.08

    Hyuck Joon Kwon, Yoshimi Tanaka, Akira Kakugo, Kazuhiro Shikinaka, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Catch and release of DNA in coacervate-dispersed gels, MACROMOLECULAR RAPID COMMUNICATIONS, 27(15) 1242-1246, 2006.08

    Asami Ohsugi, Hidemitsu Furukawa, Akira Kakugo, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Anisotropic nucleation growth of actin bundle: A model for determining the well-defined thickness of bundles, BIOCHEMISTRY, 45(34) 10313-10318, 2006.08

    Hyuck Joon Kwon, Yoshimi Tanaka, Akira Kakugo, Kazuhiro Shikinaka, Hidemitsu Furukawa, Yoshihito Osada, Jian Ping Gong

    Multiple Authorship (Including Foreigners)

  • Necking phenomenon of double-network gels, MACROMOLECULES, 39(14) 4641-4645, 2006.07

    YH Na, Y Tanaka, Y Kawauchi, H Furukawa, T Sumiyoshi, JP Gong, Y Osada

    Multiple Authorship (Including Foreigners)

  • Light-induced formation of curved needle texture by circularly polarized light irradiation on a discotic liquid crystal containing a racemic chromium complex, LIQUID CRYSTALS, 33(6) 671-679, 2006.06

    Anzai, Nobuhiro, Kurihara, Hiroko, Sone, Masato, Furukawa, Hidemitsu, Watanabe, Toshiyuki, Horie, Kazuyuki, Kumar, Sandeep

    Multiple Authorship (Including Foreigners)

  • 光反応を用いたアクチン自己組織化制御とその物性評価, 高分子学会予稿集(CD-ROM), 55(1 Disk1) 2G28, 2006.05

    三栖茉奈美, KWON Hyuck‐Joon, 敷中一洋, 角五彰, 古川英光, GONG Jian Ping, GONG Jian Ping, 長田義仁, 佐藤敏文, 佐藤敏文

    Multiple Authorship (Including Foreigners)

  • Tailored synthesis and fundamental characterization of organic-inorganic hybrid gels from siloxane or silsesquioxane building blocks andα, ω-nonconjugated dienes by means of hydrosilylation reaction, Macromol. Chem. Phys., 207(6) 627-635, 2006.03

    N. Naga, E. Oda, A. Toyota, K. Horie, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • アクチン自己組織化の光制御, 高分子ゲル研究討論会講演要旨集, 17th 101-102, 2006.01

    三栖ま奈美, KWON Hyuck‐Joon, 敷中一洋, 角五彰, 古川英光, GONG Jian Ping, GONG Jian Ping, 長田義仁, 佐藤敏文

    Multiple Authorship (Including Foreigners)

  • Light-induced Formation of Curved Needle Texture by Circular Polarized Light Irradiation on a Discotic Liquid Crystal Containing a Racemic Chromium Complex, Liquid Crystal,, 33 671-679, 2006.01

    N. Anzai, H. Kurihara, M. Sone, H. Furukawa, T. Watanabe, K. Horie, S. Kumar

    Multiple Authorship (Including Foreigners)

  • End-Crosslinking Gelation of Poly(amide acid) Gels studied with Scanning Microscopic Light Scattering, High Perfom. Polym., 18 837-847, 2006.01

    H. Furukawa, M. Kobayashi, Y. Miyashita, K. Horie

    Multiple Authorship (Including Foreigners)

  • Catch and Release of DNA in Coacervate-Dispersed Gels, Macromol. Rapid Commun, 27 1242-1246, 2006.01

    A. Ohsugi, H. Furukawa, A. Kakugo, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Anisotropic Nucleation Growth of Actin Bundle: A Model for Determining the Well-Defined Thickness of Bundles, Biochemistry, 45 10313-10318, 2006.01

    H. J. Kwon, Y. Tanaka, A. Kakugo, K. Shikinaka, H. Furukawa, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Necking Phenomenon of Double-Network Gels, Macromolecules (Communication to the Editor), 39(14) 4641-4645, 2006.01

    Y.-H. Na, Y. Tanaka, Y. Kawauchi, H. Furukawa, T. Sumiyoshi, J. P. Gong, Y. Osada

    Multiple Authorship (Including Foreigners)

  • Tailored synthesis and fundamental characterization of organic-inorganic hybrid gels from siloxane or silsesquioxane building blocks andα, ω-nonconjugated dienes by means of hydrosilylation reaction, Macromol. Chem. Phys., 207 627-635, 2006.01

    N. Naga, E. Oda, A. Toyota, K. Horie, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Surface Friction of Gels [28] -The effect of surfactants on the surface friction of gels, Polymer Preprints, Japan, 55(2) 3216-3217, 2006

    Kamada K, Tominaga T, Kurokawa T, Tada T, Furukawa H, Gong J.P, Osada Y

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦に及ぼす界面活性剤の効果, バイオトライボロジシンポジウム, 26th 13, 2006

    鎌田晃輔, 富永大輝, 黒川孝幸, 多田朋弘, 古川英光, GONG J.P, 長田義仁

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦における潤滑膜形成, バイオトライボロジシンポジウム, 26th 12, 2006

    武富直之, 富永大輝, 黒川孝幸, 杜みょう, 古川英光, GONG J.P, 長田義仁

    Multiple Authorship (Including Foreigners)

  • Polyioncomplex gels with liquid crystal structure, Polymer Preprints, Japan, 54 1525, 2005.12

    Yukari Shigekura, Yongmei Chen, Yongmei Chen, Daisaku Kaneko, Hidemitsu Furukawa, Jian Ping Gong, Jian Ping Gong, Yoshihito Osada, Yoshihito Osada, Tatsuo Kaneko

    Multiple Authorship (Including Foreigners)

  • Anisotropic polyion-complex gels via template polymerization, ADVANCED MATERIALS, 17(22) 2695-+, 2005.11

    Y Shigekura, YM Chen, H Furukawa, T Kaneko, D Kaneko, Y Osada, JP Gong

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦特性[27]―基板のモルフォロジーの効果―, 高分子学会予稿集(CD-ROM), 54(2 Disk1) 1PF060, 2005.09

    富永大輝, 古川英光, GONG Jian Ping, 真山博幸, 辻井薫, 長田義仁

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦[26]‐ゲルの摩擦に及ぼす界面活性剤の効果‐, 高分子学会予稿集(CD-ROM), 54(2 Disk1) 1T03, 2005.09

    鎌田晃輔, 富永大輝, 黒川孝幸, 多田朋弘, 古川英光, GONG Jian Ping, 長田義仁

    Multiple Authorship (Including Foreigners)

  • Elastic-hydrodynamic transition of gel friction, LANGMUIR, 21(19) 8643-8648, 2005.09

    T Kurokawa, T Tominaga, Y Katsuyama, R Kuwabara, H Furukawa, Y Osada, JP Gong

    Multiple Authorship (Including Foreigners)

  • Effect of polymer entanglement on the toughening of double network hydrogels, JOURNAL OF PHYSICAL CHEMISTRY B, 109(34) 16304-16309, 2005.09

    H Tsukeshiba, M Huang, YH Na, T Kurokawa, R Kuwabara, Y Tanaka, H Furukawa, Y Osada, JP Gong

    Multiple Authorship (Including Foreigners)

  • Effect of polymer entanglement on the toughening of double network hydrogels, JOURNAL OF PHYSICAL CHEMISTRY B, 109(34) 16304-16309, 2005.09

    H Tsukeshiba, M Huang, YH Na, T Kurokawa, R Kuwabara, Y Tanaka, H Furukawa, Y Osada, JP Gong

    Multiple Authorship (Including Foreigners)

  • Elastic-hydrodynamic transition of gel friction, LANGMUIR, 21(19) 8643-8648, 2005.09

    T Kurokawa, T Tominaga, Y Katsuyama, R Kuwabara, H Furukawa, Y Osada, JP Gong

    Multiple Authorship (Including Foreigners)

  • Crystal-like array formation in phase separation induced by radical polymerization, MACROMOLECULES, 38(16) 7127-7133, 2005.08

    Wang, X, M Okada, Y Matsushita, H Furukawa, CC Han

    Multiple Authorship (Including Foreigners)

  • Fluorescence study on the mechanism of rapid shrinking of grafted poly(N-isopropylacrylamide) gels and semi-IPN gels, POLYMER, 46(18) 7741-7748, 2005.08

    E Yoshinari, H Furukawa, K Horie

    Multiple Authorship (Including Foreigners)

  • Elastic-Hydrodynamic Transition of Gel Friction, Langmiur, 21 8643-8648, 2005.01

    T. Kurokawa, T. Tominaga, Y. Katsuyama, R. Kuwabara, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Anisotropic Polyion-complex Gels via Template Polymerization, Advanced Materials, 17 2695-2699, 2005.01

    Y. Shigekura, Y. M. Chen, H. Furukawa, T. Kaneko, D. Kaneko, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • Crystal-like array formation in phase separation induced by radical polymerization, Macromolecles, 38 7127-7133, 2005.01

    X. Wang, M. Okada, Y. Matsushita, H. Furukawa, C. C. Han

    Multiple Authorship (Including Foreigners)

  • Fluorescence study on the mechanism of rapid shrinking of grafted poly(N-isopropylacrylamide) gels and semi-IPN gels, Polymer, 46 7741-7748, 2005.01

    E. Yoshinari, H. Furukawa, K. Horie,

    Multiple Authorship (Including Foreigners)

  • Effect of Polymer Entanglement on the Toughening of Double Network Hydrogels, J. Phys. Chem, B., 109 16304-16309, 2005.01

    H. Tsukeshiba, M. Huang, Y. H. Na, T. Kurokawa, R. Kuwabara, Y. Tanaka, H. Furukawa, Y. Osada, J. P. Gong

    Multiple Authorship (Including Foreigners)

  • The surface friction of hydrogel (25) - Effects of viscoelasticity of polymer solution on the gel friction, Polymer Preprints, Japan, 54(1) , 2005

    Du M, Tominaga T, Maki Y, Furukawa H, Gong J.P, Osada Y

    Multiple Authorship (Including Foreigners)

  • Surface friction of gels [26] -The effect of surfactants on the surface friction of gels, Polymer Preprints, Japan, 54(2) 4666-4667, 2005

    Kamada K, Tominaga T, Kurokawa T, Tada T, Furukawa H, Gong J.P, Osada Y

    Multiple Authorship (Including Foreigners)

  • Surface friction of gels [27] - Effect of the surface morphology of solid surface, Polymer Preprints, Japan, 54(2) , 2005

    Tominaga T, Furukawa H, Gong J.P, Mayama H, Tsujii K, Osada Y

    Multiple Authorship (Including Foreigners)

  • 25aZD-5 Friction of Soft and Wet Matter 4 : Effect of hydro dynamic Iubrication on gel friction, Meeting Abstracts of the Physical Society of Japan, 60(0) 355, 2005

    TOMINAGA Taiki, KAGATA Go, FURUKAWA Hidemitsu, MAYAMA Hiroyuki, TSUJII Kaoru, GONG Jian Ping, OSADA Yoshihito

    Multiple Authorship (Including Foreigners)

  • Crystal-like pattern formation in polymerization-induced phase separation, PHYSICAL REVIEW E, 70(4) 040501, 2004.10

    Y Matsushita, H Furukawa, M Okada

    Multiple Authorship (Including Foreigners)

  • Crystal-like pattern formation in polymerization-induced phase separation, PHYSICAL REVIEW E, 70(4) 040501, 2004.10

    Y Matsushita, H Furukawa, M Okada

    Multiple Authorship (Including Foreigners)

  • ゲルの表面摩擦特性[23]‐表面吸着エネルギーの効果‐, 高分子学会予稿集(CD-ROM), 53(2 Disk1) 2PB038, 2004.09

    富永大輝, JIANG Z, 加々田剛, 古川英光, GONG J P, 長田義仁

    Multiple Authorship (Including Foreigners)

  • Formation and disruption of viscoelastic wormlike micellar networks in the mixed surfactant systems of sucrose alkanoate and polyoxyethylene alkyl ether, JOURNAL OF PHYSICAL CHEMISTRY B, 108(37) 14009-14016, 2004.09

    A Maestro, DP Acharya, H Furukawa, JM Gutierrez, MA Lopez-Quintela, M Ishitobi, H Kunieda

    Multiple Authorship (Including Foreigners)

  • Preparation and magnetometric characterization of iron oxide-containing alginate/poly(vinyl alcohol) networks, POLYMER, 45(21) 7129-7136, 2004.09

    Y Nishio, A Yamada, K Ezaki, Y Miyashita, H Furukawa, K Horie

    Multiple Authorship (Including Foreigners)

  • Composition dependence of polymerization-induced phase separation of 2-chlorostyrene/polystyrene mixtures, POLYMER, 45(12) 4315-4321, 2004.05

    M Okada, G Inoue, T Ikegami, K Kimura, H Furukawa

    Multiple Authorship (Including Foreigners)

  • Preparation and magnetometric characterization of iron oxide-containing alginate/poly(vinyl alcohol) networks, Polymer, 45 7129-7136, 2004.01

    Y. Nishio, A. Yamada, K. Ezaki, Y. Miyashita, H. Furukawa, K. Horie

    Multiple Authorship (Including Foreigners)

  • Formation and Distribution of Viscoelastic Wormlike Micellar Networks in the Mixed Surfactant Systems of Sucrose Alkanoate and Polyoxyethylene Alkyl Ethter, J. Phys. Chem. B, 108 14009-14016, 2004.01

    A. Maestro, D. P. Acharya, H. Furukawa, J. M. Gutie´rrez, M. A. Lo´pez-Quintela, M. Ishitobi, H. Kunieda

    Multiple Authorship (Including Foreigners)

  • Crystal-Like Pattern Formation in Polymerization-Induced Phase Separation, Phys. Rev. E., 70(040501(R)) 1-3, 2004.01

    Y. Matsushita, H. Furukawa, M. Okada,

    Multiple Authorship (Including Foreigners)

  • Composition dependence of polymerization-induced phase separation of 2-chlorostyrene/polystyrene mixtures, Polymer, 45 4315-4321, 2004.01

    M. Okada, G. Inoue, T. Ikegami, K. Kimura, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Crystal-like pattern formation in polymerization-induced phase separation, Physical Review E - Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 70(4) 3, 2004

    Yuichiro Matsushita, Hidemitsu Furukawa, Mamoru Okada

    Multiple Authorship (Including Foreigners)

  • 14aTC-8 Fnction of Soft and Wet Matter 2 : Effect of surface adsoption eneigy on gel fnction, Meeting Abstracts of the Physical Society of Japan, 59(0) 232, 2004

    TOMINAGA Taiki, JIANG Zhouting, KAGATA Go, FURUKAWA Hidemitsu, GONG Jian Ping, OSADA Yoshihito

    Multiple Authorship (Including Foreigners)

  • Swelling-induced modulation of static and dynamic fluctuations in polyacrylamide gels observed by scanning microscopic light scattering, PHYSICAL REVIEW E, 68(3) 031406, 2003.09

    H Furukawa, K Horie, R Nozaki, M Okada

    Multiple Authorship (Including Foreigners)

  • Swelling-induced modulation of static and dynamic fluctuations in polyacrylamide gels observed by scanning microscopic light scattering, PHYSICAL REVIEW E, 68(3) 031406, 2003.09

    H Furukawa, K Horie, R Nozaki, M Okada

    Multiple Authorship (Including Foreigners)

  • Salami pattern formation during phase separation induced by polymerization of 2-chlorostyrene in the presence of polystyrene, POLYMER, 44(17) 4765-4768, 2003.08

    T Tanabe, H Furukawa, M Okada

    Multiple Authorship (Including Foreigners)

  • Photochemically-induced refractive index and fluoresence patterning on polymer films, Macromolecular Symposia, 195 201-208, 2003.06

    Kazuyuki Horie, Seiichiro Murase, Satoshi Takahashi, Madoka Teramoto, Hidemitsu Furukawa

    Multiple Authorship (Including Foreigners)

  • Photochemically induced fluorescence control with intermolecular energy transfer from a fluorescent dye to a photochromic diarylethene in a polymer film, MACROMOLECULES, 36(4) 964-966, 2003.02

    S Murase, M Teramoto, H Furukawa, Y Miyashita, K Horie

    Multiple Authorship (Including Foreigners)

  • Swelling Induced Modulation of Static and Dynamic Fluctuations in Polyacrylamide Gels Observed by Scanning Microscopic Light Scattering, Phys. Rev. E, 68(031406) 1-14, 2003.01

    H. Furukawa, K, Horie, R. Nozaki, M. Okada

    Multiple Authorship (Including Foreigners)

  • Large Photoinduced Refractive Index Increase in Polymer Films Containing Phenylazide Maintaining Their Transparency and Thermal Stability, Polym. J., 35(2) 203-207, 2003.01

    S. Murase, K. Shibata, H. Furukawa, Y. Miyashita, K. Horie

    Multiple Authorship (Including Foreigners)

  • Photochemically Induced Fluorescence Control with Intermolecular Energy Transfer from a Fluorescent Dye to a Photochromic Diarylethene in a Polymer Film, Macromolecules, 36(4) 964-966, 2003.01

    S. Murase, M. Teramoto, H. Furukawa, Y. Miyashita, K. Horie

    Multiple Authorship (Including Foreigners)

  • Salami Pattern Formation during Phase Separation Induced by Polymerization of 2-Chlorostyren in the Presence of Polystyrene, Polymer, 44 4765-4768, 2003.01

    T. Tanabe, H. Furukawa, M, Okada

    Multiple Authorship (Including Foreigners)

  • Photochemically-Induced Refractive Index and Fluoresence Patterning on Polymer Films, Macromol. Symp, 195 201-208, 2003.01

    K. Horie, S. Murase, S. Takahashi, M. Teramoto, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Swelling-induced modulation of static and dynamic fluctuations in polyacrylamide gels observed by scanning microscopic light scattering, Physical Review E - Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics, 68(3) 14, 2003

    Hidemitsu Furukawa, Kazuyuki Horie, Ryunosuke Nozaki, Mamoru Okada

    Multiple Authorship (Including Foreigners)

  • Large photoinduced refractive index increase in polymer films containing phenylazide maintaining their transparency and thermal stability, POLYMER JOURNAL, 35(2) 203-207, 2003

    S Murase, K Shibata, H Furukawa, Y Miyashita, K Horie

    Multiple Authorship (Including Foreigners)

  • Dynamic light scattering from static and dynamic fluctuations in inhomogeneous media, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, 71(12) 2873-2880, 2002.12

    H Furukawa, S Hirotsu

    Multiple Authorship (Including Foreigners)

  • Isotactic-specific radical polymerization of methacrylamides in the presence of Lewis acids, Journal of Polymer Science, Part A: Polymer Chemistry, 40(14) 2496-2500, 2002.07

    Jionghao He, Shinjiro Machida, Hiromitsu Kishi, Kazuyuki Horie, Hidemitsu Furukawa, Rikio Yokota

    Multiple Authorship (Including Foreigners)

  • Preparation of novel, high-modulus, swollen- or jungle-gym-type polyimide gels end-crosslinked with 1,3,5-tris(4-aminophenyl)benzene, JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 40(14) 2501-2512, 2002.07

    JH He, S Machida, H Kishi, K Horie, H Furukawa, R Yokota

    Multiple Authorship (Including Foreigners)

  • Dynamic Light Scattering from Static and Dynamic Fluctuations in Inhomogeneous Media, J. Phys. Soc. Jpn, 71(12) 2873-2880, 2002.01

    H. Furukawa, S. Hirotsu

    Multiple Authorship (Including Foreigners)

  • Preparation of Novel High Modulus Swollen or Jungle-gym Type Polyimide Gels End-crosslinked with Tris(4-aminophenyl)benzene, J. Polym. Sci: Part A: Polym. Chem. Ed., 40(14) 2501-2512, 2002.01

    J. He, S. Machida, H. Kishi, H. Furukawa, K. Horie, R. Yokota

    Multiple Authorship (Including Foreigners)

  • Characterization of fine network structure in polymer gels with scanning microscopic light scattering, Kobunshi Ronbunshu, 59(10) 578-589, 2002

    Hidemitsu Furukawa, Kazuyuki Horie

    Multiple Authorship (Including Foreigners)

  • Effect of varying preparing-concentration on the equilibrium swelling of polyacrylamide gels, Journal of Molecular Structure, 554(1) 11-19, 2000.10

    H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Concentric pattern formation during phase separation induced by a cross-linking reaction, MACROMOLECULES, 33(20) 7238-7240, 2000.10

    M Okada, H Masunaga, H Furukawa

    Multiple Authorship (Including Foreigners)

  • Effect of varying preparing concentration in polyacrylamide gels on equilibrium swelling behavior, J. Mol. Struct., 554 11-19, 2000.01

    H. Furukawa

    Single Author

  • Effect of Varying Preparing-Concentration on the Swelling Behavior of Poly(N-isopropylacrylamide) Gels, Trans. Mater. Res. Soc. Jpn, 28(3) 973-976, 2000.01

    H. Furukawa, K. Horie

    Multiple Authorship (Including Foreigners)

  • Preparing Concentration Dependence of Viscosity in randomly Branched Systems of Polyacrylamide, Trans. Mater. Res. Soc. Jpn, 25(3) 775-778, 2000.01

    D. Katayama, H. Furukawa, M. Okada

    Multiple Authorship (Including Foreigners)

  • Shrinking Behavior Induced by Temperature Jump of N-isopropylacrylamide Gels - Pattern Formation and Turbidity, Trans. Mater. Res. Soc. Jpn, 25(3) 771-774, 2000.01

    M. Kato, H. Furukawa, M. Okada

    Multiple Authorship (Including Foreigners)

  • Preparing Concentration Dependence of Viscosity in randomly Branched Systems of Polyacrylamide, Trans. Mater. Res. Soc. Jpn, 25(3) 775-778, 2000.01

    D. Katayama, H. Furukawa, M. Okada

    Multiple Authorship (Including Foreigners)

  • Shrinking Behavior Induced by Temperature Jump of N-isopropylacrylamide Gels - Pattern Formation and Turbidity, Trans. Mater. Res. Soc. Jpn., 25(3) 771-774, 2000.01

    M. Kato, H. Furukawa, M. Okada

    Multiple Authorship (Including Foreigners)

  • Scanning Microscaopic Light Scattering of Inhomogeneous Polyacrylamide Gel, Trans. Mater. Res. Soc. Jpn, 25(3) 723-726, 2000.01

    H. Furukawa, M. Okada

    Multiple Authorship (Including Foreigners)

  • Concentric Pattern Formation during Phase Separation Induced by a Cross-Linking Reaction, Macromolecules, 33(20) 7238-7240, 2000.01

    M. Okada, H. Masunaga, H. Furukawa

    Multiple Authorship (Including Foreigners)

  • Brillouin Scattering Study of the Volume Phase Transition in Poly-N-Isopropylacrylamide Gels, J. Phys. Soc. Jpn., 64(8) 2898-2907, 1995.01

    S. Hirotsu, I, Yamamoto, A. Matsuo, T. Okajima, H. Furukawa, T. Yamamoto

    Multiple Authorship (Including Foreigners)

  • Brillouin scattering study of the volume phase transition in poly-N-isopropylacrylamide gels, Journal of the Physical Society of Japan, 64(8) 2898-2907, 1995

    Shunsuke Hirotsu, Ikuo Yamamoto, Atsushi Matsuo, Takaharu Okajima, Hidemitsu Furukawa, Tatsuyuki Yamamoto

    Multiple Authorship (Including Foreigners)

display all >>

Books

  • “Future Foods” ed. by Heimo Mikkola, IntechOpen, 2017

    Mai Kodama, Yumiko Takita, Hideaki Tamate, Azusa Saito, Jin Gong, Masato Makino, Ajit Khosla, Masaru Kawakami, Hidemitsu Furukawa

Review Papers

  • 3Dプリンターの医療技術への応用, ナノファイバー学会誌, 10(1) 29-34, 2019.07

    齊藤梓, 吉田一也, 川上勝, 古川英光, 高木朗

  • 高強度ハイドロゲルのレーザー切断面における摩擦挙動, The Physical Society of Japan, 日本物理学会講演概要集(CD-ROM), 74(1) ROMBUNNO.16pS‐PS‐75-3151, 2019.03

    吉田一也, 矢萩光, 和田真人, 亀山敏貴, 川上勝, 古川英光, 足立幸志

  • 高強度ハイドロゲルのレーザー加工断面における摩擦挙動, 砥粒加工学会学術講演会講演論文集(CD-ROM), 2019 ROMBUNNO.D05, 2019

    和田真人, 吉田一也, 川上勝, 足立幸志, 古川英光

  • 3Dプリンターで印刷した風車による発電, ３Dプリンター活用事例集～3Dプリンターの輪を広げよう～, 52-53, 2019

    牧野真人, 齊藤梓, 吉田一也, 高松久一郎, 川上勝, 古川英光, 高橋健彦

  • ホイッスルで音楽を奏でる, ３Dプリンター活用事例集～3Dプリンターの輪を広げよう～, 50-51, 2019

    牧野真人, 齊藤梓, 吉田一也, 高松久一郎, 川上勝, 古川英光

  • 高強度ゲルのすべり摩擦における摩擦摩耗挙動, The Japan Society of Mechanical Engineers, 日本機械学会機素潤滑設計部門講演会講演論文集, 18th(0) 89‐90, 2018.04

    和田真人, 古川英光

  • 3D printer for gel/soft matter and its application, 応用物理学会, 応用物理, 87(2) 111-115, 2018.02

    玉手 英明, 牧野 真人, 川上 勝, 古川 英光

  • Tribology in High-Strength Hydrogels, 日本トライボロジー学会 ; 1989-, トライボロジスト = Journal of Japanese Society of Tribologists, 63(5) 350-355, 2018

    吉田 一也, 和田 真人, 川上 勝, 古川 英光

  • Designable Materials Science for Medical and Welfare Pioneered by 3D Gel Printer, The Japan Institute of Metals and Materials, Materia Japan, 57(4) 159-163, 2018

    Sasaki Hiroyuki, Kawakami Masaru, Furukawa Hidemitsu

  • ソフト材料の3Dプリンターとソフトマター・ロボティクス, 日本試験機工業会 広報誌「TEST」, 48 6-7, 2018

    滝島勇希, 吉田一也, 川上勝, 古川英光

  • High-Strength Network Structure of Jungle-Gym Type Polyimide Gels Studied with Scanning Microscopic Light Scatterring, Mechanics and Model-Based Control of Advanced Engineering Systems, 103-112, 2014.01

    Hidemitsu Furukawa, Noriko Tanm, Yosuke Watanabe, Jin Gong, M. Hasnat Kabir, Ruri Hidema, Yoshiharu Miyashita, Kazuyuki Horie, and Rikio Yokota

  • Super tough gels with a double network structure, Chinese Society of Polymer Science, Chinese Journal of Polymer Science, 2009.01

    Tasuku Nakajima, Takayuki Kurokawa, Hidemitsu Furukawa, Qiu Ming Yu, Yoshimi Tanaka, Yoshihito Osada, Jian Ping Gong

  • Tough Hydrogel - Learn from Nature, Trans Tech Publications, Switzerland, Adv. Sci. Tech., 2008.01

    Hidemitsu Furukawa, Jian Ping Gong

  • 酸素透過基板を用いた配向バクテリアセルロースゲルの合成, セルロース学会, Cellulose Communications (セルロース学会誌), 15(2) 73-78, 2008.01

    アナンダプトラ, 古川英光, 角五彰, 龔剣萍

display all >>

Other research activities

  • Photonic Approach to Characterization and Creation of Engineering Gel Materials

    Other

Grant-in-Aid for Scientific Research

  • Grant-in-Aid for Scientific Research(A)，2023.04 - 2024.03

  • Grant-in-Aid for Scientific Research(C)，2021.04 - 2023.03

  • Grant-in-Aid for Scientific Research(C)，2021.04 - 2023.03

  • Grant-in-Aid for Scientific Research(A)，2021.04 - 2022.03

  • Grant-in-Aid for Scientific Research(A)，2019.04 - 2021.03

  • Grant-in-Aid for New academic field research(Research areas proposal)，2018.04 - 2021.03

  • Grant-in-Aid for Scientific Research(C)，2018.04 - 2021.03

  • Grant-in-Aid for Scientific Research(A)，2017.04 - 2020.03

  • Grant-in-Aid for Scientific Research(B)，2013.04 - 2016.03

  • Grant-in-Aid for Scientific Research(C)，2013.04 - 2016.03

  • Grant-in-Aid for challenging Exploratory Research，2013.04 - 2015.03

  • Grant-in-Aid for Scientific Research on Innovative Areas，2013.04 - 2015.03

  • Grant-in-Aid for Scientific Research(B)，2010.04 - 2012

  • Grant-in-Aid for Specially Promoted Research，2006.04 - 2009.03

  • Grant-in-Aid for Scientific Research(B)，2004.04 - 2005.03

  • Grant-in-Aid for Young Scientists(B)，2002.04 - 2004.03

  • Grant-in-Aid for Scientific Research on Priority Areas，2002.04 - 2003.03

  • Grant-in-Aid for Scientific Research(B)，2002.04 - 2003.03

  • Grant-in-Aid for Scientific Research(C)，2001.04 - 2002.03

  • Grant-in-Aid for Scientific Research(B)，2000.04 - 2002.03

display all >>

Other external funds procured

  • Design and embodiment of robotic driver based on branched and extension torus mechanism using super flexible materials，2018.06 - 2023.03，Design and embodiment of robotic driver based on branched and extension torus mechanism using super flexible materials

    Japan Society for the Promotion of Science

  • Development of 3D oral and nasopharyngeal impression taking method using shape memory gel and balloon technology，2018.04 - 2021.03，Development of 3D oral and nasopharyngeal impression taking method using shape memory gel and balloon technology

    The aim was to evaluate the physical properties of shape memory hydrogel (SMG) for application of dental impression material in the use of maxillofacial prosthodontics. The SMG has the unique properties that it softens when heated, can maintain its shape when cooled, and returns to its original shape when reheated. Specimens were prepared by changing the polymerization initiator and the mixing ratio of the two monomers (SA, LA) of SMG. Physical properties were evaluated using a tensile test and evaluation of shape memory characteristics (fixation rate, recovery rate). The switching of the polymerization initiator of SMG to CQ enabled polymerization with the dental photopolymerization devices. It was confirmed that the shape memory property, an original characteristic of SMG.

    Japan Society for the Promotion of Science

  • Gel Robotics with Machine Learning - Development of Autonomous 3D Printing and Scanning System，2017.04 - 2022.03，Gel Robotics with Machine Learning - Development of Autonomous 3D Printing and Scanning System

    Japan Society for the Promotion of Science

  • Gel Robotics with Machine Learning - Development of Autonomous 3D Printing and Scanning System，2017.04 - 2022.03，Gel Robotics with Machine Learning - Development of Autonomous 3D Printing and Scanning System

    Japan Society for the Promotion of Science

  • Gel Robotics with Machine Learning - Development of Autonomous 3D Printing and Scanning System，2017.04 - 2022.03，Gel Robotics with Machine Learning - Development of Autonomous 3D Printing and Scanning System

    Japan Society for the Promotion of Science

  • 21st Century COE Program，2003.04 - 2004.03

    Ministry of Education, Culture, Sports, Science and Technology

  • 21st Century COE Program，2003.04 - 2004.03

    Ministry of Education, Culture, Sports, Science and Technology

  • 21st Century COE Program，2002.04 - 2003.03

    Ministry of Education, Culture, Sports, Science and Technology

display all >>

Presentations

  • The 2nd Joint Symposium on Innovative Areas -Fusion of Soft Robotics and Dynamic Molecular Science-, Domestic presentation, 2022.02, High-order control of soft movement using 3D/4D printing, Oral presentation (general)

  • The 33rd Polymer Gel Research Symposium, Domestic presentation, 2022.01, Development of turnover mechanism of polymer gel with molecular composition suitable for antifouling, Oral presentation (general)

  • The 33rd Polymer Gel Research Symposium, Domestic presentation, 2022.01, 3D printing of starch, Oral presentation (general)

  • The 33rd Polymer Gel Research Symposium, Domestic presentation, 2022.01, Development of decompression drive soft module type block "MORI-A", Oral presentation (general)

  • The 33rd Polymer Gel Research Symposium, Domestic presentation, 2022.01, Identification of contact area by owl-shaped soft robot, Oral presentation (general)

  • 236th ECS Meeting, Hilton Atlanta (Atlanta, GA), International presentation, 2019.10, “Creation of 3D Print Gel Actuator", Oral presentation (general)

  • 236th ECS Meeting, Hilton Atlanta (Atlanta, GA), International presentation, 2019.10, Development of Physical Property Measuring Device for 3D Food Printer Gel, Oral presentation (general)

  • 236th ECS Meeting, Hilton Atlanta (Atlanta, GA), International presentation, 2019.10, "3D Printable PVDF/Dmaam Based Gel Polymer Electrolyte for Lithium Ion Batteries", Oral presentation (general)

  • MNE2018, Domestic presentation, 2018.09, “Characterization of tactile sensation of deformable surface with micro-bump structure”, Other

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “4D Printing for Sensors and Energy Applications", Oral presentation (general)

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Evaluation of Gel Touch Sensor", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Gel Transistor By Chemically Tunable Hydrogels", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Analysis of Internal Structural of 3D Printed Shape Memory Gels", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Development of Ion Conductive Monolithic Polymers", Oral presentation (general)

  • First International Conference on 4D Materials and Systems, Domestic presentation, 2018.08, “Friction Properties of Gel Rings and Plates", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “3D Printable Particle-Type Double Network Gels Studied with Scanning Microscopic Light Scattering", Oral presentation (general)

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Development of Stress Measurable Vessel Model using Photoelastic Materials", Oral presentation (general)

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “4D Printed Soft Robot", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Electrically Conductive Polymer Nanocomposites for 3D Printing", Poster presentation

  • First International Conference on 4D Materials and Systems, Poster, International presentation, 2018.08, “Modeling of Spherical Objects Using 3D Printing of Soft and Bio-Compatible Materials", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Vanadium Redox Flow Batteries Fabricated By 3D Printing and Employing Recycled Vanadium Collected from Ammonia Slag", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Structural Analysis of Multifunctional Ionic Gels", Oral presentation (general)

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Fabrication of Polymer Bonded Permanent Magnets", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Development of Physical Property Measuring Device for 3D Food Printer Gel", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “3D Gel Printing for Jellyfish-Mimic Robot", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Basic Study on Photoelastic Stress Measurement for Surgery Simulator using Gel Materials", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Microfabrication of High-Strength Gels with a 3D Printer", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Separation of Motile Euglena Using Microchannel", Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Friction Properties and Surface Observation By Surface Processing on High Strength Gels", Poster presentation

  • First International Conference on 4D Materials and Systems, Domestic presentation, 2018.08, “Synthesis and Characterization of Thermoplastic PDMS”, Poster presentation

  • First International Conference on 4D Materials and Systems, International presentation, 2018.08, “Development of Hydrogel Fatigue Sensor", Poster presentation

  • First International Conference on 4D Materials and Systems, Domestic presentation, 2018.08, “Shape Conformable Flexible Sensors for Internet of Things (IoT): A Perspective”, Oral presentation (general)

  • First International Conference on 4D Materials and Systems, Domestic presentation, 2018.08, “Study of Sensing Behavior of Conductive Hydrogels”, Poster presentation

  • First International Conference on 4D Materials and Systems, Domestic presentation, 2018.08, “Development of Multi-Material 3D Printer”, Poster presentation

  • 233rd ECS Meeting, International presentation, 2018.05, “3D Printing of Molds for Soft Lithography", Poster presentation

  • 233rd ECS Meeting, International presentation, 2018.05, “Conductive Shape Memory Gels for Sensing Application", Oral presentation (general)

  • 233rd ECS Meeting, International presentation, 2018.05, “3D Printed Shape Memory Hydrogels for Soft Robotics", Oral presentation (general)

  • 233rd ECS Meeting, International presentation, 2018.05, “3D Printing of Electrically Conductive Hybrid Organic-Inorganic Materials", Oral presentation (general)

  • 233rd ECS Meeting, International presentation, 2018.05, “Friction Property of Gel Surface Modified By Laser Processing", Poster presentation

  • 233rd ECS Meeting, International presentation, 2018.05, “Physical Properties of Carbon Fiber Doped Micropatternable Nanocomposite Polymer", Poster presentation

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “Development of double network gel ring and evaluation of friction properties”, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “Development of high-strength gel dosimeter made by 3D gel printer, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “3D printing for gel robotics”, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “RepRap SWIM-ER: low cost open-source 3D gel printer”, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “Development of high-strength gel dosimeter made by 3D gel printer, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “3D printing for gel robotics”, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “RepRap SWIM-ER: low cost open-source 3D gel printer”, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “Development of multi-material 3D printer”, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “Ionic liquid in 3D printing”, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “Fabrication of shape memory gels using 3D printer”, Oral presentation (general)

  • SPIE Smart Structures and Materials, Domestic presentation, 2018.03, “3D printing of foods”, Oral presentation (general)

  • BIONIC HUMANOID Workshop (INTER NATIONALE AKADEMIE TRAUNKIRCHEN), Domestic presentation, 2017.12, 3D Printing to Open a New Era of Soft-matter Innovation, Other

  • The Joint Symposium of ERLEP toward the Next Big Step / ERLEP Trans-Disciplinary Forum 2017 (JSPS-ATSE-EAJ), Domestic presentation, 2017.12, (Flash Talk) 3D Printing of Soft-matter to Open a New Era of Soft-matter Robotics, Other

  • Yamagata University Visit to SFU, Domestic presentation, 2017.11, Soft and Wet matter Engineering, Other

  • SPIE 2015, International presentation, 2015.03, Gel Chemical Transistor, Oral presentation (general)

  • SPIE 2015, International presentation, 2015.03, Observation of the Characteristic Properties in Soft and Wet Friction of Gel Engineering Materials, Oral presentation (general)

  • SPIE 2015, International presentation, 2015.03, 3-D Gel Printing for Soft-matter System Innovation, Oral presentation (general)

  • SPIE 2015, International presentation, 2015.03, Ionic Iiquid based multifunctional double network gel, Oral presentation (general)

  • SPIE 2015, International presentation, 2015.03, Free forming of the gel by 3D gel pronter SWIM-ER, Oral presentation (general)

  • SPIE 2015, International presentation, 2015.03, The effect of cross linker concentration in the Physical properties of Shape Memory Gel, Oral presentation (general)

  • SPIE 2015, International presentation, 2015.03, The friction measurement of functional gel mechanical materials using mechanical fixation, Oral presentation (general)

  • SPIE 2015, International presentation, 2015.03, 3D Gel Pronter for Creating Order-made Meals, Oral presentation (general)

  • Polymer Networks Group Meeting & Gel Symposium 2014, International presentation, 2014.11, 3D GEL PRINTERS FOR DESIGNABLE GEL INNOVATIONS, Oral presentation (general)

  • SmaSys 2014, International presentation, 2014.10, Gel Chemical Transistor (Smart Gel Developed with S-swich Gel), Oral presentation (general)

  • Takuma Shibata, Jin Gong, Yusuke Watanabe, Azusa Saito, M. Hasnat Kabir, Masato Makino, Masaru Kawakami, Hidemitsu Furukawa, Koichi Nishitsuka, International presentation, 2014.10, Non-Destructive Examination System for Vitreous Body Developed with Scanning Microscopic Light Scattering, Oral presentation (general)

  • SmaSys 2014, International presentation, 2014.10, Friction and Surface observation of High-Performance Gels, Oral presentation (general)

  • SmaSys 2014, International presentation, 2014.10, Double Network Ionic Gel Using Ionic Liquid, Oral presentation (general)

  • SmaSys 2014, International presentation, 2014.10, Designed Soft and Wet Objects Formed by 3D Gel Printer SWIM-ER, Oral presentation (general)

  • SmaSys 2014, International presentation, 2014.10, 3D Gel Pronter E-Chef for Food Innovation, Oral presentation (general)

  • SmaSys 2014, International presentation, 2014.10, Effect of Electric Field on Friction of High-Performance Gel, Oral presentation (general)

  • ASME 2014 Conference on Smart Materials, International presentation, 2014.09, Thermal- Mechanical ICN-SMG Gels for Smart Devices, Oral presentation (general)

  • Swiss-Jpananese Tribology Meeting 2014, International presentation, 2014.09, Gel Tribology for innovation, Oral presentation (invited, special)

  • MINS Conference 2014, Domestic presentation, 2014.07, 3D Gel Printers for Making Soft-matter Innovations, Oral presentation (invited, special)

  • the 5th JSME/ASME International Conference on Materials and Processing (ICM&P) 2014, International presentation, 2014.06, DESIGN OF REALISTIC EYE MODEL WITH SMART SHAPE MEMORY GEL (SMG), Poster presentation

  • the 5th JSME/ASME International Conference on Materials and Processing (ICM&P) 2014, International presentation, 2014.06, SIMULATION OF PARTICLE DISPERSION IN TUBE UNDER GRAVITY FIELD, Poster presentation

  • the 5th JSME/ASME International Conference on Materials and Processing (ICM&P) 2014, International presentation, 2014.06, SHAPE MEMORY GEL HAVING INTER-CROSSLINKING NETWORK STRUCTURE, Poster presentation

  • the 5th JSME/ASME International Conference on Materials and Processing (ICM&P) 2014, International presentation, 2014.06, MECHANICAL PROPERTIES OF POLYMERIC SHAPE MEMORY HYDROGEL, Poster presentation

  • the 5th JSME/ASME International Conference on Materials and Processing (ICM&P) 2014, International presentation, 2014.06, FABRICATION OF POLY (VINYLIDENE FLUORIDE) FILM USING DROP & DRY METHOD AND APPLICATION TO PRINTING TECHNOLOGY, Poster presentation

  • the 5th JSME/ASME International Conference on Materials and Processing (ICM&P) 2014, International presentation, 2014.06, FRICTIONAL MEASUREMENT OF GEL ENGINEERING MATERIALS WITH LASER PROCESSED SURFACE, Poster presentation

  • 2014SPIE Smart Structures/NDE, International presentation, 2014.03, 3D scanning of internal structure in gel engineering materials with visual scanning microscopic light scattering, Oral presentation (general)

  • 2014SPIE Smart Structures/NDE, International presentation, 2014.03, 3D printing of soft and wet systems benefit from hard-to-soft transition of transparent shape memory gels, Oral presentation (general)

  • 2014SPIE Smart Structures/NDE, International presentation, 2014.03, Transparency-switching shape memory gels, Oral presentation (general)

  • 2014SPIE Smart Structures/NDE, International presentation, 2014.03, Non-destructive examination system of vitreous body, Oral presentation (general)

  • 2014SPIE Smart Structures/NDE, International presentation, 2014.03, Beta-phase poly(vinylidene fluoride) fabrication under droplet drying process, Oral presentation (general)

  • 2014SPIE Smart Structures/NDE, International presentation, 2014.03, 3D jet printer of edible gels for food creation, Oral presentation (general)

  • 2014SPIE Smart Structures/NDE, International presentation, 2014.03, Frictional properties of high functional gel materials, Oral presentation (general)

  • 2014SPIE Smart Structures/NDE, International presentation, 2014.03, Frictional properties of gel engineering materials with laser surface texturing, Oral presentation (general)

  • 2014SPIE Smart Structures/NDE, International presentation, 2014.03, Development of a standard method to observe the surface friction of high-strength gels, Oral presentation (general)

  • THERMEC'2013, International presentation, 2013.12, Structural analysis of Shape memory gels, Oral presentation (general)

  • The 4th Asian Symposium on Advanced Materials - Chemistry, Physics & Biomedicine of Functional and Novel Materials(ASAM-4), International presentation, 2013.08, In-Situ Observation and Frictional Measurement of the Interface Between Gel and Other Materials, Oral presentation (general)

  • The 12th Asia Pacific Physics Conference of AAPPS 　ASEPS3　The third Asia-Europe Physics Summit (APPC12), Domestic presentation, 2013.07, The applications of shape memory gel as a smart material, Other

  • 2013SPIE Smart Structures/NDE, Domestic presentation, 2013.03, GEM Printer: 3D gel printer for free shaping of functional gel engineering materials, Other

  • 2013SPIE Smart Structures/NDE, Domestic presentation, 2013.03, Meso-decorated self-healing gels: network structure and properties, Other

  • 2013SPIE Smart Structures/NDE, Domestic presentation, 2013.03, Nanoscale imaging of mesh size distribution in gel engineering materials with visual scanning microscopic light scattering, Other

  • 2013SPIE Smart Structures/NDE, Domestic presentation, 2013.03, Silver nanowires embedded gel electrodes, Other

  • 2013SPIE Smart Structures/NDE, Domestic presentation, 2013.03, Drop and dry film fabrication of Beta-phase Poly(vinylidene fluoride), Other

  • 2013SPIE Smart Structures/NDE, Domestic presentation, 2013.03, Observation instrument of dynamic frictional interface of gel engineering materials with polarized optical microscopic, Other

  • 2013SPIE Smart Structures/NDE, Domestic presentation, 2013.03, Characterization of shape-memory gels using scanning microscopic light scattering, Other

  • International Symposium on Surface Science -Towards Nano- ,Bio-, and Green Innovation- (ISSS-6), Domestic presentation, 2012.12, Development of Film Interference Flow Imaging Method (FIFI) Studying Polymer Stretching Effects on Thin Liquid Layer, Other

  • The 9th SPSJ International Polymer Conference (IPC 2012), Domestic presentation, 2012.12, Meso-Decorated Gels: Synthesis and Properties, Other

  • The 9th SPSJ International Polymer Conference (IPC 2012), Domestic presentation, 2012.12, Frictional Phenomenon between Planner Hydrogel and Spherical Glass, Other

  • The 9th SPSJ International Polymer Conference (IPC 2012), Domestic presentation, 2012.12, Mechanical properties of endlinking polymer gels having rigidity, Other

  • The 9th SPSJ International Polymer Conference (IPC 2012), Domestic presentation, 2012.12, Mechanical Characterization of Polymer Gels with Scanning Microscopic Light Scattering, Other

  • The 9th SPSJ International Polymer Conference (IPC 2012), Domestic presentation, 2012.12, 3D Gel Printer for Free Shaping of Functional Gel Materials, Other

  • GelSympo 2012 (9th International Gel Symposium), Domestic presentation, 2012.10, Multi-order Structure Generated in Gels: Variations and Applications, Other

  • GelSympo 2012 (9th International Gel Symposium), Domestic presentation, 2012.10, Optical 3D Printer for Soft & Wet Industrial Materials, Other

  • GelSympo 2012 (9th International Gel Symposium), Domestic presentation, 2012.10, Frictional Force between Planner Hydrogel and Spherical Glass in Linear Sliding, Other

  • GelSympo 2012 (9th International Gel Symposium), Domestic presentation, 2012.10, Mechanical Characterization of Polymer Gels with Scanning Microscopic Light Scattering, Other

  • The 3rd Asian Symposium on Materials & Processing (ASMP2012), Domestic presentation, 2012.08, Smart Hydrogels Developed With InterCrosslinking Network (ICN) Structure, Other

  • The 3rd Asian Symposium on Materials & Processing (ASMP2012), Domestic presentation, 2012.08, Structural Analysis And Mechanical Properties Of Dry-Synthesis Gels, Other

  • The 3rd Asian Symposium on Materials & Processing (ASMP2012), Domestic presentation, 2012.08, Optical 3D Printing Of Soft And Wet Industrial Materials, Other

  • The 3rd Asian Symposium on Materials & Processing (ASMP2012), Domestic presentation, 2012.08, Surface And Bulk Mechanical Properties Of Soft And Wet Materials, Other

  • The 3rd Asian Symposium on Materials & Processing (ASMP2012), Domestic presentation, 2012.08, Creating Standards For Soft And Wet Industrial Materials, Other

  • International Conference on Advanced Dynamics and Model Based Control of Structures and Machines(ABC2012), Domestic presentation, 2012.07, Swelling and elasticity of gels with inter-crosslinking network structure, Other

  • International Conference on Advanced Dynamics and Model Based Control of Structures and Machines(ABC2012), Domestic presentation, 2012.07, Flow control by polymers studied with film interference flow imaging, Other

  • IACIS 2012 International Association of Colloid and Interface Scientists Conference, Domestic presentation, 2012.05, Creation of Shape Memory Gels with Inter-Crosslinking Network Structure, Other

  • IACIS 2012 International Association of Colloid and Interface Scientists Conference, Domestic presentation, 2012.05, Intelligent Button Developed with Smart Soft and Wet Materials, Other

  • PI-SMART(Progress and Innovation of SMART)in Hirosaki 2012, Domestic presentation, 2012.04, Novel Shape Memory Gels for Soft Polymeric Actuator -Mechanism and Applications-, Other

  • 2012 Smart Structures/NDE Technical Summaries, Domestic presentation, 2012.03, Photo-responsible gel actuator developed with scanning microscopic light scattering, Other

  • 2012 Smart Structures/NDE Technical Summaries,, Domestic presentation, 2012.03, Diagnosis at a glance of biological non- Newtonian fluids with Film Interference Flow Imaging (FIFI), Other

  • 2012 Smart Structures/NDE Technical Summaries, Domestic presentation, 2012.03, Soft and wet actuator developed with responsible high-strength gels, Other

  • 2012 Smart Structures/NDE Technical Summaries, Domestic presentation, 2012.03, An inter-crosslinking network gels that has both shape memory and high ductility, Other

  • GelSympo 2012 (9th International Gel Symposium), Domestic presentation, 2012, Introduction to Scaling Concepts in Polymer Gels , Other

  • PI-SMART(Progress and Innovation of SMART)in Hirosaki 2012, Domestic presentation, 2012, Recent Progress of Soft Gel Actuator, Other

  • International Symposium on Surface Science -Towards Nano- ,Bio-, and Green Innovation- (ISSS-6), Domestic presentation, 2011.12, Smart Lenses Developed with High-Strength and Shape Memory Gels, Other

  • International Symposium on Surface Science -Towards Nano- ,Bio-, and Green Innovation- (ISSS-6), Domestic presentation, 2011.12, Ultrahigh Ductile Gels Having Inter Crosslinking Network (ICN) Structure, Other

  • 2nd Asian Conference on Engineering Education (ACEE2011), Domestic presentation, 2011.10, Learn-by-Doing Approach to Convert Students' Learning Attitude from Passive to Active in Department of Systems Innovation at Yamagata University, Other

  • 2nd Asian Conference on Engineering Education (ACEE2011), Domestic presentation, 2011.10, I Love ECO . Production of Eco-friendly Building Materials and An Eco-conscious Miniature House from Biomass, Other

  • 2nd Asian Conference on Engineering Education (ACEE2011), Domestic presentation, 2011.10, Education Project for Innovation, Executed in Faculty of Engineering at Yamagata University in 2010 - Two Education Programs about Biomass and Snow Vehicle -, Other

  • The Pacifichem 2010 The International Chemical Congress of Pacific Basin Societies, Domestic presentation, 2011.06, 3D Optical Forming of High-Strength Gels, Other

  • The Pacifichem 2010 The International Chemical Congress of Pacific Basin Societies, International presentation, 2010.12, Polymer in Flowing Soap Films: Its Effect on Two-Dimensional Turbulence Studied by a New Imaging Analysis, Poster presentation

display all >>

 

Academic Activity

  • 高分子学会, 1996.01 - 1999.01

  • 高分子学会, 1996.01 -

  • 高分子学会, 1996.01 -

  • 日本化学会, 1997.01 - 2000.01

  • 日本物理学会, 1999.01 - 2001.03

  • 高分子学会, 1999.01 -

  • 高分子学会, 1999.01 -

  • 国際会議GelSympo 実行委員会, 2003.01 - 2003.12

  • , 2003.01 -

  • , 2003.01 -

  • , 2003.01 -

  • , 2003.01 -

  • 国際会議GelSympo 実行委員会, 2005.01 - 2005.12

  • 高分子学会, 2006.06 - 2008.06

  • 国際会議GelSympo 実行委員会, 2007.01 - 2007.12

  • セルロース学会, 2008.01 -

  • セルロース学会, 2008.01 -

  • 国際会議GelSympo 実行委員会, 2009.01 - 2009.12

  • 日本ゴム協会 , 2009.01 -

  • , 2009.11 -

  • 高分子学会, Chair of ICT Contents Committee, 2013.05 -

  • , 2017 - 2018

  • 日米先端工学シンポジウム（JAFOE）, 2017.04 -

  • , 2018 -

  • 高分子学会, 2018.05 -

  • 公益社団法人高分子学会, 2020.04 - 2022.03

  • 日本眼光学会, 2023.01 - 2023.12

display all >>

Media Coverage

  • 助けて！未来くん，2024.01

  • 日経産業新聞「生鮮品凍結粉砕で10年腐らず，2024.01

  • 水槽を漂う人工クラゲから、フードロスを解消するスマート弁当箱まで。3Dゲルプリンターが切り拓く未来社会，2023.12

  • NHK「クローズアップ現代」，2023.11

  • NHK　WORLD-JAPAN，2023.11

  • Japan Mobility Show，2023.10

  • NHK「バックヤード」，2023.10

  • 3Dプリンター介護食，2023.09

  • 3Dフードプリンターで介護食づくり，2023.08

  • NHK WorldのBizstream，2023.08

  • 「驚き！ニッポンの底力 宇宙開発物語(89分)」，2023.08

  • 外務省「Japan video topics」，2023.07

  • 日経産業新聞　Lサイズはいらない「少食高齢」で縮む胃袋，2023.07

  • NHK　おはよう日本「3Dプリンターで”介護食”その狙いは？」，2023.07

  • おはよう日本3Dフードプリンター特集，2023.07

  • やわらか3D共創コンソーシアム、5周年記念シンポジウムを開催，2023.05

  • NHK「所さん事件ですよ！」「山形大工学部に腕のいいすし職人がいる」/山形大学工学部教授　古川英光，2023.04

  • テレビ東京「探究の階段」 3Dプリンターから食品／古川英光（山形大学 工学部 教授），2023.03

  • 山形大学工学部、院生の受賞相次ぐ，2022.01

  • 「空気で柔軟に変形する「ロボブロック」が面白い」，2022.01

  • 「やまがたつなぐ未来」②世界初3Dプリンター「軟らかく再現」，2021.12

  • News「ひらめきときめきサイエンス」，2021.12

  • ゲル用3DプリンターゲルパイパーGelPiPer，2021.10

  • 「近未来の食卓 フードテックで食品ロスゼロへ 前編 3Dフードプリンター 個人に応じた味・機能へ」，2021.10

  • 3Dプリンターで食べ物もつくる！，2021.09

  • 3Dプリンターで食べ物もつくる！，2021.09

  • 未来技術の旗手たち「食品3Dプリンターで介護食に革命を 見た目や食感を改善、楽しめる食事に」，2021.09

  • 未来技術の旗手たち「食品3Dプリンターで介護食に革命を　見た目や食感を改善、楽しめる食事に」，2021.09

  • 楽しい「介護食」を提供する3Dフードプリンター＝食糧問題に挑む川上勝・山形大学准教授＝，2021.06

  • 楽しい「介護食」を提供する3Dフードプリンター＝食糧問題に挑む川上勝・山形大学准教授＝，2021.06

  • 「チョコレート迷路」，2021.02

  • 柔らか犬型ロボットに癒やし機能，2020.11

  • ぬくもりあるロボ，2020.11

  • 目から“涙”新機能に驚き　柔らか「ハチ公」改良版　旧長井小で一般公開，2020.11

  • 「ロボコ「フードテックプロジェクト」3Dプリンターでつくる！ユニークな食べ物」，2020.11

  • 【ゲル×ロボット】やわらかな体を手に入れることで、ロボットはより生き物らしくなれる，2020.10

  • 足の裏に肉球・触るとぬくもり・瞳から涙も・・・ハチ公ロボお披露目，2020.10

  • 全身柔らかハチ公ロボ山大が製作，2020.10

  • 涙・ぬくもり・・・「ゲルハチ」進化　山大　触れ合う人の「共感」測定へ，2020.10

  • 機械だって涙流します　犬型ロボットで探る、人の共感，2020.10

  • 3Dプリンタ最前線　技術でかなえる手作りのぬくもり／山形大学　川上勝先生　後編，2020.10

  • 山形大学が改良　犬型ロボ、質感リアルに「ゲルハチロイド」眼球にゲル素材，2020.10

  • 犬型ロボット「ゲルハチ」質感リアルに進化　山形大，2020.10

  • 第38回3Dプリンタ最前線　後編「技術でかなえる手作りのぬくもり」，2020.10

  • 「やわらかロボ、有機EL体験して 山大が中学生向け講座」，2020.10

  • 「ゲル・有機EL・・・先端の研究見に来て 来月 山大が中学生向け講座」，2020.10

  • 「非常時にも学内連携 医学部×工学部 山形大学オリジナルモデル フェイスシールド完成」，2020.10

  • 3Dプリンタ最前線　食の喜びをプリントアウト／山形大学　川上勝先生　前編，2020.09

  • 『体温測る「ゲルハチ公」山形大工学部開発、ロボット改良』，2020.09

  • 『体温測る「ゲルハチ公」癒されながら確認「ピッ」山形大学工学部開発 ロボット改良』，2020.09

  • 第37回3Dプリンタ最前線 前編「食の喜びをプリントアウト」，2020.09

  • 第37回3Dプリンタ最前線　前編「食の喜びをプリントアウト」，2020.09

  • 「字で感情、柔らかロボ・・・福祉×テクノロジー」，2020.09

  • 『渋谷ヒカリエなどで最後の「超福祉展」オンラインシンポジウム中心に』，2020.09

  • フォトフラッシュ『人との距離を測り鳴き声を発するほか近づくだけで検温ができる「ゲルハチ公」＝渋谷ヒカリエなどで「超福祉展」』，2020.09

  • 犬型ロボに温度センサー山形大抵抗感なく検温，2020.08

  • 「犬型ロボに温度センサー山形大抵抗感なく検温」，2020.08

  • 山形大学、ゲルハチ公に温度センサー 抵抗感なく検温，2020.08

  • 山形大学、ゲルハチ公に温度センサー　抵抗感なく検温，2020.08

  • トレンドたまご・ワールドビジネスサテライト「癒される？人口クラゲ」，2020.07

  • HONDA SMILE MISSION「人工クラゲで癒しの水槽を作った大学教授をリサーチせよ」，2020.07

  • 「軟らかハチ公ロボット 山大、シリコーン使い開発 福祉分野での活用期待／山形」，2020.06

  • 軟らかハチ公ロボット 山大、シリコーン使い開発 福祉分野での活用期待／山形，2020.06

  • 特集 ソフトマターの機械要素としての適用 ソフト3D界面研究から展開するソフトマターの機械要素への適用～ソフトマターのデジタル化が駆動するやわらかものづくり革命～，2020.06

  • 「山形大学SWEL、3Dプリンター用いて医療用フェイスシールドを製作、医学部付属病院に提供を開始」，2020.06

  • 山形大学SWEL、3Dプリンター用いて医療用フェイスシールドを製作、医学部付属病院に提供を開始，2020.06

  • 特集　ソフトマターの機械要素としての適用　ソフト3D界面研究から展開するソフトマターの機械要素への適用～ソフトマターのデジタル化が駆動するやわらかものづくり革命～，2020.06

  • 「Nやまトク フェイスシールドに込めた思い」、Ｎスタやまがた、2020年5月27日18：15～18:25，2020.05

  • 『「やわらかロボット」どう役立つ？触れ合って成長 人の代わりにも』，2020.05

  • 『「やわらかロボット」どう役立つ？触れ合って成長　人の代わりにも』，2020.05

  • 『触りたくなる「ゲルハチ公」 触られ方に応じ鳴き声・振動・光 山大が開発 福祉など活用期待』，2020.05

  • 「フェースシールド学内で使って使う 山大工学部に医学部付属病院が依頼 素早い設計と生産を実現」，2020.05

  • 「大学病院で足りない医療物資、工学部で生産 山形で開始」，2020.05

  • やわらか3D共創コンソーシアム、2周年記念シンポジウムを開催，2020.05

  • 「医学部付属病院へ供給 学内連携に活路 山形大工学部、フェースシールド作製着手」，2020.05

  • ハチ公の日，2020.04

  • やわらかロボ！ゲルハチ公，2020.04

  • やわらかロボ！ゲルハチ公，2020.04

  • Twitter,日本科学未来館,2020年4月8日，2020.04

  • FaceBook Japan-The Government of Japan 2020年4月8日，2020.04

  • ハチ公の日，2020.04

  • 「人工クラゲでいやされて 山形大など開発 介護施設向け」，2020.04

  • 「（地域発）山形県から 人口クラゲで癒やされて 山形大など開発、介護施設向け」，2020.04

  • 第2回次世代3Dプリンタ展が開催，2020.04

  • 第2回次世代3Dプリンタ展が開催，2020.04

  • 「栄養も美しさも完璧な食へ 3Dプリンター食も立体印刷 フードテック進化系」，2020.04

  • 「ふわふわ・・・癒やしのクラゲロボ 山形大学工学部とNDソフトが開発」，2020.04

  • 「ふわふわ・・・癒やしのクラゲロボ 山形大学工学部とNDソフトが開発」，2020.04

  • 「広がる3Dゲルプリンタの用途 デザイン思考が牽引する食のイノベーション」2020年4月号、325頁ー327頁，2020.04

  • 『定義も用途も広がる「ゲル」』2020年4月号、326頁，2020.04

  • 「ゲルで概念覆す」，2020.03

  • 『経営ひと言／山形大学・古川英光教授「ゲルで概念覆す」』，2020.03

  • 「人工クラゲで癒やし いかが？ 山大など 介護施設向けに来月から試験販売」，2020.03

  • 「本物そっくりに動く人工クラゲ」，2020.03

  • 「観賞用の人工クラゲ、NDソフトと山形大が共同開発」，2020.03

  • 『柔らかい素材でロボ 山形大とNDソフト「ゲルクラゲ」共同開発』，2020.03

  • 『柔らかい素材でロボ 山形大とＮＤソフト、「ゲルクラゲ」共同開発』，2020.03

  • 『山形大学「ゲルクラゲ ロボット」を開発、販売へ』，2020.03

  • 「ディライトマター、卓上型３Ｄゲルプリンター投入 用途開拓」2020年3月10日，2020.03

  • 「TCTJapan2020が開催、3Dプリンティングの材料・評価技術が集結」月刊ソフトマター3月号Ｎｏ.024，23－24頁，2020.03

  • 『開催中レポート「第2回次世代3Dプリンタ展」 速度・精巧さ・色など進化 出展中止も多数』，2020.02

  • 「【展示会レポート】2019国際ロボット展」，2020.02

  • 「名古屋で企業立地セミナー」，2020.01

  • 「中部地方の企業山形県が誘致へ名古屋でセミナー」，2020.01

  • 「やわらか3D共創コンソーシアム第1回ロボット部会が開催」，月刊ソフトマター1月号，No.022，23‐24頁，2020.01

  • 科学番組ガリレオX「未来に実現？！夢の技術 2050年までの科学予測が描き出す世界」2020年1月12日（日）11:30～12:00（2020年1月19日（日）11:30～12:00 再放送），2020.01

  • やわらか3D共創コンソーシアム第1回ロボット部会が開催，2020.01

  • 『山形大、4月から日本科学未来館で研究 3Dプリンター使ったったものづくり』，2020.01

  • 「国際ロボット展閉幕」，2020.01

  • 「2019国際ロボット展：“やわらかいハチ公ロボ”降臨 AI搭載で声掛けや触れ合いに反応」，2019.12

  • 理論から実装へ、動き出すソフトマター　topic.3「食事の価値を広げるソフトな素材の新潮流」，2019.12

  • 『理論から実装へ、動き出すソフトマター topic.1「材料、機械、情報の掛け算でものづくりを変える」』リバネス研究応援 vol16. P14-15，2019.12

  • 「医療関連機器４製品 NDソフト、山形大技術で」，2019.11

  • 「NDソフト、山形大学の技術で医療関連機器」，2019.11

  • 「やわらか3D共創コンソーシアム、11/20に滋賀で第２回やわらかものづくり研究会・ゲル部会を開催」，月刊ソフトマター2019.11月号, No.020，2019.11

  • 「2020年、渋谷。超福祉の日常を体験しよう展」，イッツコムチャンネル(11ch)，2019.09

  • 『ハチ公ロボ触って 渋谷で９日まで「超福祉体験」展』，2019.09

  • 『ハチ公ロボ触って 渋谷で9日まで「超福祉体験」展 障害者、高齢者、LGBT 心の垣根取り除く』，2019.09

  • 「山形大制作触ってやわらかハチ公」，2019.09

  • 『福祉分野の新製品を体感 渋谷で「超福祉の日常」展』，2019.09

  • 「渋谷にやわらかハチ公 山形大が制作」，2019.09

  • 「感情」伝えるハチ公ロボ,讀賣新聞，2019.09

  • 『渋谷ヒカリエなどで「超福祉展」ゲル素材ハチ公像、難聴体験VRも』，2019.09

  • 『「ハチ公像」感情ゆたかに 山形大グループ開発 ゲル素材活用 軟らか AI駆使 鳴き声変化』，2019.08

  • 『軟らか「ハチ公」感情豊かに AI駆使し鳴き声変化 山形大学部グループが開発』，2019.08

  • 『急成長する世界市場、10年の遅れを取り戻せるか 課題解決に向けて、産官学で企業の実用化支援 近畿経済産業局「3D積層造形によるモノづくり革新拠点化構想」キックオフイベント』，コンバーティック2019 5月号Vol.554 No.47（P89），2019年5月15日発行，2019.05

  • 「３Dプリンターの現状とこれから」，2019.05

  • 「やわらか3D共創コンソーシアム、１周年記念シンポジウムを開催」，月刊ソフトマター2019.5月号, No.014，2019.05

  • 経営ひと言／山形大学・古川英光教授「柔らかさ必要」，2019.04

  • 「第1回ソフトロボット創世シンポジウムが開催」、月刊ソフトマター2019.4月号, No.013（P22-24），2019.04

  • 「3Dプリンターで食が変わる！？」，2019.03

  • 第一回ソフトロボット創成シンポジウムが開催，2019.03

  • 「第１回次世代3Dプリンタ展が開催」，月刊ソフトマター2019.3月号, No.012，2019.03

  • 「内閣府やわらか3Dものづくりアイデアソン、優秀賞表彰式が開催」，2019.02

  • 「3Dプリンターで「楽しい介護食」 形も軟らかさも自在」, YAHOO！JAPANニュース 国内, 2019/2/4 11：36配信，2019.02

  • 3Dプリンターで、「楽しい介護食」形も軟らかさも自在，2019.02

  • 「食べる楽しみ増やしたい」 3Dプリンターで介護食を」, 朝日新聞DIGITAL, 2019/1/24 17時00分，2019.01

  • 「3Dプリンターで「介護食」 元の食品の食感・見た目めざす」，2019.01

  • 「3Dプリンタで未来の介護食 山大川上准教授が企業と連携し研究」，2019.01

  • 「柔らかロボ 山大工学部の挑戦 海洋探査のクラゲ型 最後は溶けごみゼロ」，2019.01

  • 「柔らかロボ 山大工学部の挑戦 より「人に近い」存在」，2019.01

  • 「Newsトピックス 内閣府と山形大学・古川研究室、やわらか3Dものづくりアイデアソンを開催」，月刊ソフトマター2019年1月号， No.010，2019.01

  • 「3Dプリンタによる新しい介護食、嚥下食の開発」，2018.12

  • 「電動義手で福祉を学ぶ」，2018.12

  • 「3Dプリンター＋柔らか素材 この道具が冬を楽しく 米沢でコンテスト 除雪やスポーツに新構想」平成30年，2018.12

  • 「やわらか3D共創コンソーシアム、やわらかものづくり研究会を開催」，月刊ソフトマター2018.12月号, No.009，2018.12

  • 「Japan Robot Week 2018開催、ロボットを支えるソフトマターの技術が展示」，月刊ソフトマター2018.11月号, No.008，2018.11

  • 「山形大、24社と基礎研究の新組織 新材料開発、実用化へ」，2018.10

  • 「山形大、24社と基礎研究の新組織 新材料10～20年後実用化」，2018.10

  • 「進化アグリテック（下）倫理・制度議論これから3D成形・ゲノム編集・・・食に大変革の芽」，2018.10

  • 「3Dプリンターで料理、ゲノム食材・・・食の未来に大変革」，2018.10

  • 「触ると光るクラゲロボット 山大工学部将来はペット・海洋探査」，2018.10

  • 「ソフトマター・ロボティクス～ロボットを革新するソフトマター開発の最前線～」，月刊ソフトマター2018.10月号, No.007，2018.10

  • 『「4DMS」国際会議開幕 米沢山形大に研究者集う』，2018.08

  • 『「4次元材料」米沢で初の国際会議』平成30年8月26日，2018.08

  • 『米沢で「4Dマテリアル」の国際会議 26日から』，2018.08

  • 「やわらか3D共創コンソーシアム、第1回合同部会を開催」，メカニカルサーフェス・テック，2018年8月号，No.045，2018.08

  • 『3Dプリンター活用本物そっくりなロボット 「ゲルクラゲ」可能性∞ 山形大・古川教授のグループ開発』，2018.08

  • 「特別補佐に古川教授山大工3Dプリンタの拠点推進と広報強化」，2018.08

  • やわらか3D共創コンソーシアム、第1回合同部会を開催，月刊ソフトマター2018.8月号, No.005,，2018.08

  • 『米沢「有機材料事業創出センター」にて3Dプリンター技術披露 大学×企業活用探る』，2018.07

  • 農水若手キャリア生出演！フード×テック！3D食プリンターとは？，2018.06

  • 「OPEN MEALS PROJECT～「食転送」で目指す食革命の第一歩～」,月刊電通報6月号（03頁），2018.06

  • 「化石発見40年 3Dプリンター活用 県立博物館 9月企画展」，2018.06

  • 「山形大の3Dプリント活用術」,仙台経済界増刊号仙台のプロジェクト2018-19年版（102頁），2018.05

  • 「ものづくり米沢発信 関係機関、おもてなしへ連携 8月400人規模の国際研究会議」，2018.05

  • 「やわらか3D共創コンソーシアム設立、キックオフシンポジウムが開催」,月刊ソフトマター2018.5, No.002，2018.05

  • 「匠の技盛り込む」，2018.04

  • 「3Dプリンター連携組織 山形大、20社と製品開発」，2018.04

  • 「山形大学、やわらか3D共創コンソーシアムを設立」,月刊ソフトマター2018.創刊号, No.001，2018.04

  • 「医療への活用が進む3Dプリンティング技術」，みずほ情報総研レポート2018vol.15，2018.03

  • 「３Dプリンター活用し産業創出 ”製造業革命”本県から 来月発足 山形大と企業連携の新組織」，2018.03

  • 「新材料+ものづくりをシームレスにつなげる「材料30年から、材料３ヵ月へ」の実現を」, コンバーティング総合情報誌コンバーテック2018年3月号, Vol.540 N.46，2018.03

  • 「３Dプリンターで新産業 山形大が来月連携組織 医療・ロボ…企業に参加呼び掛け」，2018.03

  • 「食品の３Dプリンター 山形大 ブロック積み上げ成形」，2018.03

  • 「食欲そそる形に積み上げ 山形大が新技術開発 介護分野に活路食品ブロック」，2018.03

  • 「ぶらり展示会の旅 3D Printing 2018」, 戦略経営者, 2018年3月号No.377，2018.03

  • 「ゲルとゴムで柔らか～いロボット」，2018.02

  • 「柔らか素材のロボ試作品 山形大 コンニャク状など4種類」，2018.02

display all >>